4 FALKEN band grinding machines used machines

width of the strips: 150 mm band length: 2280 mm band speed: 22 m/sec table-size: 700 x 350 mm roll diameter: 140 / 80 mm motor speeds:: 2880 1/min range L-W-H: 1300 x 800 x 1500 mm total power requirement: 3,0 kW weight of the machine ca.: 250 kg Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized tape oscillation approx. 10mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2280 mm revolutions per minute: 2880 U/min roll diameter: 140 / 80 mm table-size: 700 x 350 mm engine output: 3.0 kW weight: 250 kg range L-W-H: 1300 x 800 x 1500 mm ** MADE IN GERMANY ** - Machinevideo - https://www.youtube.com/watch?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75 mm band length: 2000 mm band speed: 34 m/s total power requirement: 3,0 kW weight of the machine ca.: 75 kg dimensions of the machine ca.: 570 x 570 x 1150 mm Features: - Sanding and support table - Hinged protective shield - Machine base - Sanding belt - Emergency stop button - Operators manual (English) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 34 m/s total power requirement: 3,0 kW weight of the machine ca.: 95 kg dimensions of the machine ca.: 650 x 650 x 1150 mm Features: - Sanding and support table - Flip-up protective screen - Machine base - Sanding belt - Emergency stop button - Operators manual (English) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2000 mm band speed: 1400 / 2800 U/min tube diameter: 40 - 140 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 360 kg. ** Exhibition machine - like NEW ** not yet in use (!!) ** New price approx. 6.500 euros ** Special price on request - Machine video - identical machine - https://www.youtube.com/watch?v=LXP09NFTnlw&t=1s The FALKEN PN 38/140 is a multifunctional grinding machine for grinding pipe and profile ends Equipment: - robust electro-motor pipe profile grinding machine - enables notches up to an angle of 50° - large-dimensioned surface grinding surface with protective cover - 2x belt speeds - control panel, front left - including emergency stop button - grinding belt can be replaced quickly and easily - vice movement to the right - left, forwards & backwards possible - side grinding dust collection container - h ...

tube diameter: 16.0 - 90.0 mm width of the strips: 100 mm band length: 1250 mm grinding band dimension: 100 x 1250 mm total power requirement: 2.2 kW weight of the machine ca.: 180 kg. range L-W-H: 1200 x 600 x 1150 mm ** Exhibition machine - like NEW ** not yet in use (!!) ** New price approx. 4.500 euros ** Special price on request The PN 17/90 is a grinding machine for grinding pipe and profile ends on the front. Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery * incl. storage area - rear of the machine - simple manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front - front privacy screen made of plexiglass - side transport bags for easy trans ...

plate thickness: 1.20 mm ST Shaft length: 140 mm roll diameter: 62.0 mm throat: 100 mm roll speed: 16.0 + 32.0 U/min engine output: 0.75 kW weight: 135 kg range L-W-H: 900 x 450 x 1350 mm ** Display machine - like new ** Never been used (!!) ** Special price upon request Features: - 8 pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2 bending speeds - Powerful drive motor, even under continuous load - 1 mobile foot switch for forward and reverse rotation - Machine base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 2.5 mm ST shaft length: 250 mm roll diameter: 96.0 mm throat: 160 mm roll speed: 6.0 + 13.0 U/min. total power requirement: 1.5 kW weight: 350 kg range L-W-H: 1400 x 550 x 1120 mm ** Display machine - like new ** Never been used (!!) ** Special price upon request Features: - 4x pairs of beading and flanging rollers included - Robust beading machine with motor-driven rollers - Lower shaft with adjustable stop - For economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Clearly arranged control elements - Manual adjustment of the upper roller - 2x bending speeds - Powerful drive motor, even under continuous load - 1x mobile foot switch for forward and reverse rotation - Machine base frame The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1.20 mm ST shaft length: 140 mm roll diameter: 62.0 mm throat: 100 mm total power requirement: manuell kW weight of the machine ca.: 50.0 kg dimensions of the machine ca.: 560 x 220 x 500 mm ** Display machine - like new ** Never been used (!!) ** Special price upon request Description: - 8 pairs of beading and flanging rollers included - For the economical production of a wide variety of bead types - High accuracy thanks to precision-mounted shafts - Lower shaft with adjustable stop - Sturdy cast iron construction with a modern design - Expanded application range thanks to 8 different, optionally available roller pairs - Adjustable upper shaft The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1250 mm plate thickness: 1.5 mm roll length: 1270 mm roll diam. toproll: 75.0 mm engine output: 1.5 kW weight: 400 kg range L-W-H: 1730 x 700 x 1160 mm ** Exhibition machine - like NEW ** not yet in use (!!) ** Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2020 mm plate thickness: 2.0 mm distance between columns: 2100 mm angle adjustable from - to: 130 Grad total power requirement: manuell weight of the machine ca.: 1850 kg. range L-W-H: 3100 x 725 x 1350 mm ** Exhibition machine - like NEW ** not yet in use (!!) ** Special price on request Equipment: - heavy/manual swivel bending machine, with counterweight - long service life thanks to robust welded steel construction - universally applicable for metalworking shops and craft businesses - quick and easy bending process using a bow handle - all bearings and guides in a stable design - easy adjustment of the upper beam for efficient work - manual adjustment of the lower beam - manually adjustable angle fixed stop with analogue degree display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending diam. - max.: 36.0 mm ST cutting thickness max.: 36.0 mm ST motor: 1450 U/min oil volume: 32.0 l motor: 380 Volt 50 Hz total power requirement: 5.5 kW weight: 650 kg range L-W-H: 1470 x 1200 x 1020 mm ** Exhibition machine - NEW (!!) Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes * for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - ECO mode = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm * for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm  ...

tube diameter: 10.0 - 42.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 54.0 mm CU/Alu bar material - diameter: 30.0 mm wall strength: 2.0 mm revolutions per minute: 1.30 U/min voltage: 400 Volt total power requirement: 1.5 kW weight: 110 kg range L-W-H: 400 x 450 x 570 mm ** Exhibition machine - like new ** never been used (!!) ** Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1 1/4 Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included * Additional segments available upon request for an additional charge * ERCOLINA tool holder The data for this ad was created with ...

: 1550 mm : 2,0 mm : 1,5 mm roll diameter: oben 90 mm : 560 kg : 2580 x 700 x 1250 mm mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 4.5 mm pre-bending: 4.0 mm roll length: 1550 mm min. dia.: ca. 190 mm roll diam. toproll: 140 mm bending speed: 3.0 m/min engine output: 2.2 kW weight: 1420 kg range L-W-H: 2700 x 750 x 1000 mm Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Special equipment included in the price: - hardened rollers - motorized side roller adjustment - digital position display for motorized adjustable side roller The data for this ad was created with Modul ...

tube diameter: 10.0 - 60.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 64.0 mm CU/Alu wall strength: 4.0 mm revolutions per minute: 1.25 - 2.50 U/min bar material - diameter: 35.0 mm voltage: 400 Volt Control: ISITAN NC total power requirement: 2.0 kW weight: 140 kg range L-W-H: 380 x 900 x 600 mm ** Exhibition machine - like new ** never been used (!!) ** Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2 Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Equipment: - ISITAN NC digital control unit * Control panel = touchscreen * 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included *  ...

sheet width: 1050 mm plate thickness: 2.0 mm roll length: 1070 mm roll diam. toproll: 75.0 mm engine output: 1.5 kW weight: 325 kg range L-W-H: 1530 x 700 x 1160 mm ** Exhibition machine - like NEW ** not yet in use (!!) ** Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: bis M 24 turning speeds: max. 280 U/min thread: M5 - M24 working area: 2050 Rmax. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 3.0 kW weight - pallet system: 280 kg Equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to DIN 376 . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamping table - Tapping head  ...

thread dia.: bis M 36 turning speeds: max. 150 U/min thread: M5 - M36 working area: 2050 Rmax. work height max.: 900 mm table surface area: 700 x 900 mm oil volume: 100 l engine output: 4.0 kW weight - pallet system: 320 kg equipment: - electro-hydraulic tapping machine - Large working range (max. radius 2050 mm) * Smooth swivel movement, e.g. due to built-in gas pressure dampers - Mobile machine base frame * Oil tank hydraulic unit integrated in the base frame * Hydraulic pressure gauge - Vertical / horizontal thread cutting possible - Connection cable with 16A plug * Special accessories included in the scope of delivery : - Tap quick-change inserts according to DIN 376 . M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 . M27 / M30 / M33 / M36 - Infinitely variable speed adjustment incl. digital display - Minimum quantity lubrication (spray oiler/compressed air) - T-slot clamp ...

plate thickness: 2,0 mm tube diameter: 60,0 mm motor: 400 Volt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 6.5 mm pre-bending: 4.5 mm diameter of upper rolls: 150 mm side roll diameter: 130 mm diameter of lower rolls: 150 mm distance: max. OW zu UW 20.0 mm voltage: 400 V total power requirement: 1.1 + 2.2 kW weight of the machine ca.: 2370 kg range L-W-H: 3300 x 1150 x 1110 mm ** Rarely used, according to the previous owner ** Current new price approx. 25.000 euros ** Special price upon request (!) Features: - Electro-hydraulic 4-roll plate bending machine * ??Equipped with a driven top roll and bottom roll * Sturdy welded construction - Application range: * Light to heavy-duty sheet metal processing (steel/aluminum/stainless steel) - Electro-hydraulic adjustment of the bottom and side rolls - Linear guidance for the side rolls - Top roll driven by a robust electric motor and planetary gearbox - Mobile, separate control console - Hardened, crowned rolls ( ...

length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins !!! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 1900 mm width: 810 mm height: 860 mm internal dimension: 1,5 x 0,74 x 0,78 Contents: 600 l The containers are chip bins !!! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 40.0 t stroke: 285 mm flat steel: 250 x 24 mm working feed: 10.0 mm/sec return speed: 10.0 mm/min work height max.: 930 mm table:: 660 x 1250 mm total power requirement: 4.0 kW motor: 400 Volt 50 Hz oil volume: 40.0 l weight: 800 kg range L-W-H: 1450 x 800 x 1300 mm Furnishing : - electro-hydraulic horizontal bending machine - large, robust machine table made of hardened steel - Machine made of hardened and ground forged steel - Digital display for stroke setting * * Programming of 1x bend end point & 1x retract point possible - 1x tool set (1x bending punch / 1x 1V die) - infinitely variable adjustment of the bending speed and pressing force - 1x manual material stop - Free-moving dual footswitch - Machine can be moved with a pallet truck/stacker - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

0: 5.000 kg height: 500 mm width: 1200 mm Furnishing : - stable construction - high load-stable stability - powder-coated in RAL 5010 gentian blue - CE marking techn. Details: - Height: 500 mm - Width: 1200 mm - Load capacity: 5 to - Height adjustable: no - Support surface: 1200 x 100 mm - Space requirement approx .: 1.2 x 0.8 x 0.8 m - Weight approx. 35 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.