184 FANUC used machine for sale

DIMENSIONS / WEIGHTS:. - total height:900 mm

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

Controls:FANUC J3iC WORKING RANGE -ROBOT-:. - capacity:210 kg - Reach:2655 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:1240 kg Technical description : 6-axis industrial robot. Payload according to model. Including electrical cabinet operating panel and cable. More KUKA robots in quantities available i.e. # KUKA KR 150 # KUKA KR 210 # KUKA KR 240 # KUKA KR 360

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

Controls:FANUC 30iA WORKING RANGE -ROBOT-:. - capacity:170 kg - Reach:1520 mm - Number of controlled axes:6 DIMENSIONS / WEIGHTS:. - total weight approx.:800 kg

Fanuc ROBOSHOT α-S30iB (2023) Model: FANUC ROBOSHOT α-S30iB Clamping Force: 300 kN Max. / Min. Mold Height: 330 mm / 150 mm Tie Bar Distance (HxV): 310 x 290 mm Platen Diameter: Ø 100 mm Injection Speed: 600 mm/s Screw Diameter: 22 mm Screw Volume: 11 ccm Resin Compatibility: Glass fiber content up to 30% Machine Type: Fully Electric Injection Molding Machine

x-travel:500 mm y-travel:400 mm z-travel:330 mm control:FANUC 31i B5 tool change unit:21 fach rapid traverse in x-y-z axis:54 m/min taper ISO:BT 30 turning speed range::10.000 1 / min spindle drive:11 / 3,7 kW max. table load:300 kg surface area:600x 400 mm Dimensions (L/W/H):1,6 x 2,1 x 2,25 m rapid traverse:48 m/min total power requirement:11 kVA weight of the machine ca.:2,1 t vertical CNC-milling-drilling machining center, Infrared Touch probe, el. handwheel, autom. door on right side, no internal Coolant Supply, Approx. 65.500 hours "machine on", approx. 8.200 hours "machine run"

Wire EDM machine Type: Robocut C 600 i Manufacturer: Fanuc Year: 2018 Control: Fanuc Series 31i-W model B X: 600 mm Y: 400 mm Z: 310 mm Wire diameter (max.): 0.3 mm Workpiece height (max.): 310 mm Workpiece width (max.): 820 mm Workpiece length (max.): 1050 mm Max workpiece weight: 1000 kg Equipment: refrigerator, compressor Machine in good condition, fully functional, under power Find more here - / Contact us at -

Manufacturer:Fanuc Type of Machine : Robot Year of Manufacture: 2022 Technical Specifications - Controlled Axes: 6 - Max Load Capacity at Wrist: 7 kg (15.4 lb) - Reach: 911 mm (35.9 in) - Repeatability: 0.010 mm (0.0004 in) - Robot Weight: 27.0 kg (60 lb) Find more here - / Contact us at -

Hello

x-travel: 500 mm y-travel: 400 mm z-travel: 330 mm total power requirement: kW weight of the machine ca.: 2100 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fanuc M-2iA/3SLYear of manuf. : 2021 Control : Fanuc R-30iB Mate Plus ____________Description:In General:Number of axes:4Repeatability:+/- 0.1 mmWorking range:1,130 x 400 mmMaximum wrist weight:3 kgController:Fanuc R-30iB PlusRemote Controll:iPendant Touch

Manufacturer: Fanuc Model: ARC Mate 100ic 8L Year of Manufacture: 2015 Type of Machine : Welding Robot Condition: Used Technical Specifications - Number of axes: 7 - Reach: 2,200 mm - Controller: Fanuc System R-30iB - Welding system: Kemppi KempArc Puls 450 System Dimensions - Length: 11,000 mm - Width: 5,000 mm - Height: 2,500 mm - Robot rail travel: 7,500 mm Included with the Machine - Full protective enclosure of the system as shown in photos - Rotary positioner (Drehtisch) included - Software for offline programming included - On-site operator training available on request - Dismantling support provided - loading assistance available on site Find more here - / Contact us at -

This 3-axis FANUC Robodrill D21MIB 5ADV Plus was manufactured in 2023. It features a high-speed spindle capable of 10,000 rpm and a robust automatic oil lubrication system. The machine includes a center-through coolant system and a servo turret for enhanced efficiency. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill D21MIB 5ADV Plus vertical machining centre we have for sale. Contact us for further details.

This 6-axis FANUC M-20iA robot arm was manufactured in 2015. It features a maximum payload of 20 kg and an impressive reach of 1,811 mm. The robot can be mounted in various configurations, including floor, ceiling (inverted), and angle mounting. If you are looking to get high-quality automation capabilities, consider the FANUC M-20iA robot arm we have for sale. Contact us for further details.

This 5-axis FANUC Robodrill alpha-T21iFL was manufactured in 2008. It features impressive X, Y, and Z travels of 700 mm, 400 mm, and 330 mm respectively, along with a spindle speed of 24,000 rpm. The machine offers a maximum feed rate of 54,000 mm/min and can accommodate a workpiece diameter of up to 300 mm on a 5-axis table. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill alpha-T21iFL vertical machining centre we have for sale. Contact us for more information about this machine.

This 4-axis FANUC Robodrill alpha-T21iFL was manufactured in 2008. It features impressive X-axis travel of 700 mm, Y-axis travel of 400 mm, and Z-axis travel of 330 mm. The machine is capable of a spindle speed of 24,000 rpm and a maximum feed rate of 54,000 mm/min. If you are looking to get high-quality machining capabilities, consider the FANUC Robodrill alpha-T21iFL vertical machining centre we have for sale. Contact us for further details.

Used Robot Palletizer Fanuc 2003 – The Ultimate Solution for Palletizing Operations Are you looking for a reliable and efficient robot palletizer for your business operations? Look no further than the 2003 Fanuc Robot Palletizer model M-410 iB 160. Equipped with a pick-up head for cardboard and available base, this palletizer is designed specifically for palletizing tasks. With its intelligent cable routing inside the hollow wrist, high operating speeds, and high inertia and wrist moments, this machine can handle large grippers and heavy payloads with ease. Its 6-axis control servo gripper provides better adaptability in handling products of different sizes. Operating within an optimized workspace and with high vertical travel, this robot can develop pallets up to a height of almost 3 meters. The integrated base and controller in the pedestal (or the available non-pedestal version) ...

Used Robot Depalletizer Fanuc 2003 – The Ultimate Solution for Depalletizing Operations Are you looking for a reliable and efficient robot depalletizer for your business operations? Look no further than the 2003 Fanuc Robot Depalletizer model M-410 iB 160. Equipped with a pick-up head for cardboard and an available base, this depalletizer is designed specifically for depalletizing tasks. With its intelligent cable routing inside the hollow wrist, high operating speeds, and high inertia and wrist moments, this machine can handle large grippers and heavy payloads with ease. Its 6-axis control servo gripper provides better adaptability in handling products of different sizes. Operating within an optimized workspace and with high vertical travel, this robot can depalletize products up to a height of almost 2.7 meters. The integrated base and controller in the pedestal (or the available ...

Used Robot Palletizer FANUC 10800 bph General Description of the Robot The Used Robot Palletizer FANUC 10800 bph is a high-performance industrial robotic unit specifically designed for automated palletizing operations in bottling plants. The configuration combines the FANUC R-2000iC/165F robot and the R-30iB Plus controller. As a result, the system ensures excellent reliability, mechanical robustness, and positioning accuracy in high-intensity production environments. Operational Capacity and Mechanical Configuration Equipped with a six-axis articulated arm, the Used Robot Palletizer FANUC 10800 bph delivers ±0.05 mm repeatability, in full compliance with ISO 9283 standards. Furthermore, it achieves a maximum reach of 2655 mm and supports payloads of up to 165 kg at the wrist. Thanks to its rotating arm design, the system executes palletizing cycles with high precision. In particular, ...

Spindle amplifier module, Servo Amplifier Module, CNC Control System, Plug-in card, -Manufacturer: FANUC -Type: A06B-6152-H045H580 -Dimensions: 150/380/H290 mm -Weight: 8.2 kg

Servo amplifier module, servo amplifier module, CNC control system, plug-in card, -Manufacturer: FANUC -Type: A06B-6127-H209 -Dimensions: 90/380/H310 mm -Weight: 6.2 kg

Power supply module, servo amplifier module, CNC control system, plug-in card -Manufacturer: FANUC -Type: A06B-6150-H075 -Dimensions: 300/380/H290 mm -Weight: 20.3 kg

Power supply, switching power supply, CNC control, E-STOP UNIT -Manufacturer: Fanuc, E-STOP UNIT CNC control emergency stop unit -Type: A05B-2400-C451 -Dimensions: 315/100/H180 mm -Weight: 5 kg

DC spindle motor, electric motor, direct current motor, servo motor -Power: 5.5/7.5 kW -Speed: 1160/3500 rpm -Shaft: Ø 48 x 110 mm -Construction: B3 -Additional cooling -Dimensions: 780/330/H260 mm -Weight: 200 kg

Servo Amplifier Module, CNC Control System, plug-in card, -Control unit comes from a Hitachi Seiki HC400 machining center -Manufacturer: FANUC -Type: A02B-0094-B502 -with: 7x plug-in cards -Dimensions: 560/400/H255 mm -Weight: 12.2 kg

Servo Amplifier Module -Manufacturer: FANUC -Type: A05B-2400-C060 -Number: 1x converter available -Dimensions: 380/120/H190 mm -Weight: 2 kg