FINNROSE fmt used machines

Radial fan, chip extraction blower, fan, extraction, chip blower -Motor power: 15 kW -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm -Dimensions: 1050/1060/H1240 mm -Weight: 276 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 18.5 kW -Speed: - rpm -Volume flow rate: approx. 7000 m³/h -Total pressure: approx. 2800 Pa -Inlet connection: Ø 280 mm -Outlet connection: Ø 350 mm -Dimensions: 1120/840/H930 mm -Weight: 284 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: approx. 22 kW -Speed: not visible -Volume flow: not visible -Inlet connection: Ø 280 mm -Outlet connection: Ø 450 mm -Dimensions: 1050/900/H920 mm -Weight: 280 kg

I sell various belt conveyors suitable for industry, for example in wood industry or material manipulation, etc. Belt width 1350mm Lengths 1000-1500-2500-3000-4000mm. All fully fit for work. Available the same.

Finnrose Plate Stacker Type ST-10-170 Electronic For automatic stacking (e.g. on roller conveyor for further transport) Of plate-shaped workpieces, doors, or woods Was used to stack timber behind a four-sided planer Workpiece size Maximum 2500 mm x 800 mm Minimum 400 mm x 250 mm Weight maximum per workpiece 80 kg Capacity 20 workpieces per minute, depending on the workpiece size Maximum stacking height above floor 1800 mm Belt drive 0.18 kW Roller drive 0.09 kW Compressed air consumption per stroke 3.9 NL Instruction manual and circuit diagram available Weight approx. 600 kg Dimensions 2800 mm x 2200 mm x H 1100 mm (H max. 1800 mm)

Finnrose Plate Stacker Type ST-10-170 Electronic For automatic stacking (e.g. on roller conveyor for further transport) Of plate-shaped workpieces, doors, or woods Was used to stack timber behind a four-sided planer Workpiece size Maximum 2500 mm x 800 mm Minimum 400 mm x 250 mm Weight maximum per workpiece 80 kg Capacity 20 workpieces per minute, depending on the workpiece size Maximum stacking height above floor 1800 mm Belt drive 0.18 kW Roller drive 0.09 kW Compressed air consumption per stroke 3.9 NL Instruction manual and circuit diagram available Weight approx. 600 kg Dimensions 2800 mm x 2200 mm x H 1100 mm (H max. 1800 mm)

Manufacturer: Finnrose, Type: Transportband, Year: 1990, Working length mm: 4500, Working widht mm: 1300, Total hight mm: 950, Engine power kW: 1,2, Feeding speed max m/min: 2,5-10, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, Year :1990

Manufacturer: Finnrose, Type: Finnrose, Year: ca.1992, Working widht mm: 1350, Total hight mm: 950, Adjustable: yes, Rollenteilung mm: 100, Rollendurchmesser: 60, Driven: yes, Working widht mm: 1350, Conveyor speed m/min: 5-25, Drive power kW: 0,5, Year :ca.1992

Manufacturer: Finnrose, Year: 1980, Total hight mm: 940, Adjustable: yes, Rollenteilung mm: ca.150, Rollendurchmesser: 80, Length mm: 2600, Width total mm: 1600, Drive power kW: 0,75, Wight approx. kg: 400, Year :1980

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1300 mm - Working height 100 mm - Max. part height 100 mm - Roller diameter 60 mm - Roller pitch 100 mm - Colour 7035 lightgrey - Voltage / HZ 400/50 - Voltage fluctuation max. +/- 5 %

- Producer Finnrose - Type Cooling - Year of construction 2001 - Working width 1.300 mm - Working height ~ 900 + - 20 mm - Max. part height ~ 100 mm - Cooling dryer 2.000 mm - Roller transportsystem - Roller diameter 60 mm - Roller pitch 100 mm - Length conveyor 3.000 mm - Length 3.000 mm - Colour 7035 - Location, in stock - Voltage fluctuation max. +/- 5 % - Without switch cabinet

Height=1.5 m, Overall length= 0.64 m, Overall width= 1.74 m, Net weight= 273 kg,

Auction-ID: A1-43573-258

Roller transport Finnrose 3410 mm - Manufacturer Finnrose - Working width 1,400 mm - Roll diameter 65 mm - Roll pitch 100 mm - All wheels with rubber surface - Feed infinitely variable via handwheel - Feed speed approx. 2 - 8 m/min - Length 3,410 mm - Volts, Hz 400 V / 50 HZ - Location, at the warehouse D-32825 Blomberg

In good condition CO2 installation & cold room build in 2021. Cold room temperature +-4°C and a evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and a isolation value of RC 5,21. Further the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machineset and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a low-temperature Bitzer 2HSL-3K-40S & medium-temperature Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a D ...

- Producer Aagaard Finnrose - Year of construction 2005 - Working width 1.300 mm - Gesamtbreite 1.380 mm - Rollenbahnhöhe 800 mm - Diameter roller 65 mm - Roller pitch 110 mm - alle Rollen mit Gummioberfläche - FU-Regelung für Feed speed - Angetrieben - Length 3.000 mm - Colour 7035 - Motor power 0,37 kW - Voltage / HZ 400 / 50 - Location, in stock

- Producer Finnrose - Working width 1.400 mm - Diameter roller 65 mm - Roller pitch 100 mm - alle Rollen mit Gummioberfläche - Feed speed infinitely adjustable by hand wheel - Feed speed ca. 2 - 8 m/min - Length 3.410 mm - Voltage / HZ 400 V / 50 HZ - Location, in stock D-32825 Blomberg