3 FRAMAX bottle filling plants used machines

1 used Framax Tribloc bottle filler, built in 2012, consisting of Borelli 9-digit rinser and 8-digit low vacuum / gravity filler type CIAO-xp with 1-digit Arol Eagle C 26 mm crown corker. Plant last used for filling beer (bottle fermentation) in 61 mm diameter 330 ml as well as 71 mm diameter 500 ml glass bottles at an output of 1,920 bottles/hour. Filler also suitable for bottling wine.

1 of used Framax tribloc bottling machine, new 2012, consisting of a Borelli 9-head rinser / 8-head low-vacuum/gravity filler CIAO-xp with single-head Arol Eagle C 26 mm crowner, Last running bottle-conditioned beer at 1.920 bph with handling parts for 61 mm diameter 330 ml and 71 mm diameter 500 ml glass beer bottles. Filler also ideally suitable for bottling wine.

10842025 Isobaric Filling Block Framax Modulblock RFCI for Glass Bottles The Framax Isobaric Modulblock RFCI 16/16/1 DPS/C Filler Block is suitable for bottling a wide range of carbonated products, including beer, kombucha, carbonated water, soft drinks, other sparkling beverages and still drinks. This filler block has been filling beer in 300ml and 500ml glass bottles with crown cap. Filling capacity is 2000 – 3000 depending on product, operation parameters are easily set up from HMI touch screen and controlled with Siemens PLC. Machine has been maintained regularly according to manufacture’s instructions and is in vey good condition. The bottling machine consists of: • A 16 clamp rotating rinser, featuring a single hot water sanitation cycle, • A 16 valve isobaric counterpressure filler with double air pre-evacuation using CO₂, • A single head crowner (crowning u ...

FRAMAX CIP SET Portable CIP Set - Second Hand Type FRAMAX 0500X2 Manufactured: 2019 Two x 500 litres approx. tanks. The machine requires a supply of Steam and compressed air plus three phase power : INSTALLED POWER 2 KW POWER SUPPLY 400 VAC 50HZ+PH+N+E AIR PRESSURE BAR 8/10 HEATING STEAM PRESSURE BAR 2.5 WATER PRESSURE BAR 2.5/3.5 UTILITY CONNECTIONS WATER 3/4” M PNEUMATIC AIR 3/8” F STEAM 1/2” F CIP DELIVERY DN 40 F CIP RETURN DN 40 F DRAIN DN 40 F Machine Dimensions : LENGTH 1200 WIDTH 1600 HEIGHT 2150 WEIGHT 350 Kg For more information and more available stock please visit us at - advancedbrewing.co.uk

J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a “lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an “End of Line Production Systech Display Monitor� ...

Pressure Bottle Filler. 24 fillers. System FALSCH FLASCHEN. Whole machine made in inox. Machine after total renovation in 2019. Warranty: 24 months.

Dairy Mschinery UK now offers new Glass Bottle Fillers for Milk and Juice. We offer machines for Hot fill and Cold Fill. Our bottle capacities are between 1000 - 7000 bottles per hour. Manufacture : Dairy Machinery UK Volume : 500ml - 1000ml Capacity : Option on order between 1000- 7000 bph Capping : 38mm magnetic capping chucks Filling Nozzles : Gravity Filling on Rubbers Lift and Fill or Gravity Filling Drop and Fill Cap : Aluminium Screw Cap CIP : Available Controls : Control panel Standards 2019 Certified : EC certificates Installation : We install all our machines at the clients facilities. Warranty : 12 months Spare Parts : spares@dairymachineryuk.co.uk

GAI vacuum filler + 1 screwdriver head Capacity: 18,000 b / h - 20 ml, 12 fillers

Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!

Complete PET Soft Drinks Filling Line for sale by Indassol 1.5 Litre & 2 Litre Concentrated Soft Drinks (non-carbonated) 16,000 - 18,000 bph, Blowing - Filling - Packaging Krones, Krupp, Procomac, Zalkin, Alfa Rollquatro, Hueft, Kisters, Newtec Palletiser (1 Litre Filling Line also available) PLEASE NOTE*** Both Lines were used by Princes Soft Drinks for the production of Non-carbonated Concentrated Soft Drinks. The Krones Fillers on both Lines are Counter Pressure Fillers and the Lines could be adapted to produce Carbonated Soft Drinks by the addition of a Carbonation Unit to the process plant. ADDITIONAL ITEMS AVAILABLE 2 off Bellis & Morcom High Pressure 40 Bar Compressors. Machines are from 1987 but have been subject to a full Service Agreement with Gardner Denver. Lachenmeier H-Multi Flex Pallet Wrapper/Hooder (shared with Line D6) Serial No. 39031 ...

Used filling line for glass bottles, capacity 0.33 - 1 l. Line description: - 4XP25 packing machine with the following parameters: - stepless adjustment range - 3500- 8200 b / h, and 5300-12300 b / h - maximum capacity for sparkling water with 6g / l CO2 and temperature 235oK / 11500 g / h for bottles. 0.33l; 5000 g / h for the cylinder 1.0l / - installed power - 2.2 kW 380 V - CO2 consumption - 40 kg / h - pressure of CO2 or sterile air in the tank higher than the fluid pressure by 0.150 MPa - air consumption - approx. 13 m2 / h - air pressure - 0.5 MPa - number of nozzles - 36 pcs. - number of closing heads - 8 pcs. - noize - 90 dB / A - overall dimensions: width - 2895 mm; length - 2125 mm; max height - 2530 mm; curb weight - 5100 kg - service - 1 person

1 of used bottling line for beer, consisting of loading table, Harlands Proteus single-station wrap-around pressure-sensitive labeller, Moravek BF15 sterile filter, Moravek BC15 carbonator, Moravek 12/12/1 rinser / filler / crowner, Linx CJ-400 ink-jet coder, Cheops tray/pad loader with shrink-wrapper, interconnecting conveyors. Used for 330 ml (D 60.7 x H 227 mm), speed 2.500 - 3.000 bph, and 500 ml (D 69 x H 245 mm) speed 2.200 - 2.500 bph, packed as either 4x2=8 or 6x4=24 bottles per tray or pad. Equipment new 2015.

Filler block, Fabr. Nagema, Type: Varifill 40/10K/10PP Capacity: 12,000 Fl/h, run on 0.33 lt longneck and 0.5 lt NRW bottles 40 filling valves 10-digit crown cork 10-digit screw capper (for MCA 28 closures), double pre-evacuation, Running direction: left -> right YOC 1994 L: 4,000 mm, W: 2,700 mm, H: 2,800 mm Price on request

Bottling line KP 2010 Automatic bottling line for bottles. Filling up to 2 liters 6-head filling Speed + 3000 bottles / hour depending on bottle size and product Material stainless steel Lightweight construction, wheels underneath, easy to move Conveyor slatband type, length 4 meters Gutter under the conveyor Electricity 380 v. Compressed air: 6 bar

-Manufacturer: TESSA -Capacity: 1500 Btls/h -Filling Machines - Two Pcs -Labeling device ( Self- adhesive labels) -Shrink tunnel -Set of conveyers -PET Bottles blowing machine -Mold for blowing PET bottles 1 l -Mold for blowing PET bottles 0.5 l

Vacuum filler, make SEN, with 28 filling valves, with 5-head screw capper for MCA 28 caps.

Bottle Filler and crown capper, make Krones, type: Mecafill VK2V 024-188/KK, 24 filling valves, Vacuum pump, Hot water injection before closing, 6 head bottle cap closing, Crown Cork feeder, electr. height adjustment, direction: counter clockwise / right to left, with Siemens S7 Simatic ET200M, built 1998

Bottle filler, make Krones, type: VKS 84 / SV 12-094 RM, for lemonade and mineral water 24.000 bph, with 84 filling valves (mechanical with float control), with 12-head screw capper make Zalkin, for MCA 28 aluminum caps, right machine, built 1992

Bottle filler, make. KHS, type: VVF-90-KK16-SV16, with 90 filling valves, with 16-head crown cork and 16-head screw capper, built 1989

Bottle filler, make Pirzer, type: Nova, long pipe filler with 20 filling valves, with crown capper, built 1981

Vacuum filler, make SEN, type: Compacta FWF 30/6, for about 5.000 bph, with 30 filling valves and 6-head nature corker, adjust to 0,7 lt / 0,75 lt "Bocksbeutel"- and 1,0 lt wine bottle, built 1985

Bottle Filler, make WüMa, typ: BAD 20/4, with 20-valve pressure filler and 4-head crown capper, built 1977

Bottle filler, make ICS, type: TPS 24/6K, with 24 filling valves and 6-head crown capper, adjust to 0,5 lt. NRW- and Euro-bottles, built 2002, was in operation until the end of 07/2022

Vacuum Filler, make Vir Mauri, type: PAVON / S.12.DP, with 12 filling valves, in stainless steel, in good condition.

PET-Filler, make: H&K, type: VVF112/14SV, with 112 Filling valves, with 120 mm pitch, with 14-head screw capper make Alcoa für PCO 28 caps, built 1985