FREY konti used machines

Vacuum filling machine Frey Konti A 50, filling, portioning, linking, max. 2300 kg/h, filling pressure max. 30 bar, portioning speed max. 300 port./min, all stainless steel, CAN control, impulse control for clipping machine, filling pipes with different caliber. The machine is currently in the refurbishing and can be tested in our facility in Koblenz, Germany.

Height=1.63 m, Overall length= 1.02 m, Overall width= 0.75 m, Net weight= 505 kg,

Height=1.63 m, Overall length= 1.02 m, Overall width= 0.75 m, Net weight= 350 kg,

Height=1.86 m, Overall length= 1.9 m, Overall width= 2.3 m, Net weight= 350 kg,

Frey Heinrich 20 piston filler, 20 liters piston filling machine, including filling pipes. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Frey F-Line F50 vacuum stuffer, vacuum filling machine for filling, portioning, linking, CAN control, filling capacity up to 2.200 kg/h, filling pressure up to 30 bar. You are very welcome to test the machine in our facility in Koblenz, Germany.

Frey Kompakta 2-30 piston filler, straight filling, portioning, linking, suitable for all types of sausages, casing holding device optially available, 30 liters filling cylinder, LCD3 control with TFT color display, memory for 100 filling programs, portioning speed up to 250 portions/min, portioning range 5 - 10,000 g, fill level indicator, piece counter, count-based auto stop.

Height 1200 mm Width 700 mm Length 930 mm Capacity 30 l Power supply: 400V 50Hz 3N Total power 3.3 kW Main Material Stainless steel, acid-resistant Stuffer Type Piston Stuffer

We are selling here a vacuum filler from the manufacturer Frey, type E120 in a very good used and functional condition. The machine runs on 400 volts, 120 litre hopper, LCD control, clipper connection, for filling and portioning, workshop tested, immediately ready for use, dimensions W/D/H 85/60/170 cm, others on request.

Frey OSCAR 20 Piston Filler used Machine is equipped with two rollers that allow manoeuvring with the toggle lever folded out It comes from an insolvent company, the piston with gasket, union nut, piston wrench and piston screw could not be found during the dissolution and were therefore reordered, see pictures. The machine is completely made of stainless steel (body, cylinder, piston and cover) and is in the same condition as it was returned by the customer, so it must be thoroughly cleaned before use Video about test run available

45 cycles per minute with chamfering 60 cycles per minute without chamfering Maximum cutting length 700 mm, width 400 mm

Multi-wire cutter with slat feed and chunk cutter 13 stones in NF format with three-sided chamfering. Batten length 1340 mm

Height=1.23 m, Overall length= 0.7 m, Overall width= 0.76 m, Net weight= 360 kg,

Height=1.6 m, Overall length= 0.7 m, Overall width= 0.7 m, Net weight= 320 kg,

Height=1.36 m, Overall length= 2.56 m, Overall width= 0.76 m, Net weight= 448 kg,

Height=1.38 m, Overall length= 0.9 m, Overall width= 2.52 m, Net weight= 1374 kg,

Oil-Pressure Piston Filling Machine Cylinder Volume: 20 L Stainless Steel Cylinder, Piston, Housing, and Lid Swivel Lid Power Rating: 750 Watts Three-Phase Current 400 Volts, 50 Hz

Time relay, relay, heating current monitoring, contactor, semiconductor contactor, contactor -Type: FZR/220 AC/1 -0.05 s-1s Price: per piece -Quantity: 5 available -Weight: 0.2 kg

Height=1.28 m, Overall length= 0.7 m, Overall width= 0.76 m, Net weight= 333 kg,

Frey K 120E Filling Machine, Vacuum Filling Machine, with twisting gear, new vacuum lid (the photos are still the old one), Connection 400V, weight approx. 470kg, good used condition, functional

automatic baling press Manufacturer: PAAL Type: KONTI 275 F Built: 2007 Main parts of the press: 1 automatic duct press (without wire winding devices) 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force: 800 kN / 80 t at 300 bar Specific pressing force: 9.70 kg/cm2 Channel cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,600mm Number of connecting wires: 4 pieces vertically Drive power: Main pump: 1 x 45 kW Pump delivery capacity: 1 x 380 l/min Throughput: up to approx. 280 m3/h under operating conditions Performance at: - 35 kg/m3 bulk weight: approx. 9.5 t/h - 60 kg/m3 bulk weight: approx. 16.5 t/h - 100 kg/m3 bulk weight: approx. 26.0 t/h Hydraulic oil tank volume: 2,100 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other equipment: Operator Panel MP 270 auto ...

automatic baler Manufacturer: PAAL Type: KONTI 275 D/k Year of construction 1999 specifications: Pressing force: 75 t Specific pressing force: 9.09 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 500 - 750 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 75 kW Throughput: 350 m³/h Pressing capacity: - approx. 12.0 t/h at department store (35 kg/m³ bulk density) - approx. 21.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 33.0 t/h for collected goods (100 kg/m³ bulk density) Binding: 4-fold vertical + 3-fold horizontal Machine weight: approx. 25.0 t

BVM Compacta Konti 5015 MY 2005 BVM SC 4030 SD Bj 2005 BVM TB 400 Bj 2007 BVM inlet conveyors

automatic baler Manufacturer: PAAL Type: KONTI 600 G/S/K with cross-binding Year of construction 2012 Operating hours: approx. 44,700 hours specifications: Press force: 1,546 kN System pressure: 315 bar Bale size: 1,100 x 1,100 x length in mm Filling opening: 2,000 x 1,020 mm Drive power: 3 x 55 kW Pump capacity: 3 x 420 Ltr. Oil tank volume: 3,100 ltr. Throughput:approx. 780 m³/h Capacity at idle: approx. 1,220 m³/h Capacity at 35 kg/m³: approx. 26.5 t/h Output at 60 kg/m³: approx. 44.0 t/h Output at 100 kg/m³: approx. 69.0 t/h Control: Siemens S7 Setting: 5-fold vertical Additional 4-fold automatic horizontal tying Bale weight: approx. 800 - 1,250 kg depending on the material to be pressed and bale length Machine weight: up to approx. 42 t Includes a top pressure plate slot cover Printing plate was renewe ...

automatic baler Manufacturer: PAAL Type: KONTI 200 C Year of construction: 1993 specifications: Press force: 50 t Channel format: 750 x 1,100 mm Specific pressing force: 6.06 kg/cm² Bale weight: 425 - 550 kg, depending on material and bale length Infill opening: 1,400 x 1,020 mm Drive power: 45 kW Throughput: 200 m³/h Pressing capacity: - approx. 7.35 t/h layered at department store (35 kg/m³ bulk density) - approx. 12.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 20.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 17 t