GOEDHART vc used machines

New Kelvion / Goedhart VCe-i 635010 Freon evaporator with hot gas defrost built in 2020. Complete with 3 Ziehl-Abegg fans - 50 Hz - 0,72 kW - 1240 RPM - diameter 500 mm and a total airflow of 25.437 m³/h. Specifications: Brand: Goedhart Type: VCe-635010 Capacity: 36,6 kW Refrigerant: Freon Number of fans: 3 Fin space in mm: 10 mm Defrosting: Hot gas Air flow: 25.437 m³/h Sizes: 3560x1000x1010 mm (LxWxH) Year of built: 2020 Volume: 43 dm³ Weight: 340 kg

Air cooler, cold storage, refrigerated container, cold room -equipped with: 4x fans -Cooling capacity: 70 kW -Air flow rate: 39,673 m³/h -Area: 348 m² -Slat spacing: 10 mm -Fan diameter: 500 mm -Lamb spacing: 10 mm -Housing: made of stainless steel -Drip tray -Number: 2x coolers available -Price: per piece -Dimensions: 4550/1100/H940 mm -Weight: 600 kg/piece

GOEDHART DU-S Brand:GOEDHART Type:DU-S Stock number:M23-2477 Cooling capacity:80.0 kW Application:Freezing / Cooling Number of fans:3 Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Refrigerant Content:222 kg Voltage:400 Volts Motor power:3x 3 kW Dimensions:4010 x 2434 x 1050 mm Weight:2,000 kg Year:1996 Number in stock:6 piece(s) Price:Quotation request Description: Good dual discharge Goedhart ammonia evaporator with 3 fans. Mentioned capacity at an evaporating temperature of -38°C and 7K. Visit our website: used-refrigeration

New Goedhart LLK.p 22x6x3900x50/50x(2x8)+ Freon evaporator. Please notice that we can deliver this evaporator with 4 suitable fans that have an diameter of 780 mm & the capacity is based on an airflow of 40.000 m³/h. Specifications: Brand: Goedhart Type: LLK.p 22x6x3900x50/50x(2x8) Capacity: 63,5 kW (Based on an airflow of 40.000 m³/h) Refrigerant: Freon Number of fans: 4 Fin spacing: 8 Sizes: 4450x1550x1410 mm (LxWxH) Surface: 338 m² Volume: 101 dm³ Weight: 590 kg

Goedhart DVS 84637 Internal volume 150 dm3 TS +55/-5 C PS/PT 28/40 bar Fluid R404A

Air cooler, evaporator, cold room, industrial cooler, cooling unit, cooler, water cooler, cooling system, refrigeration, cold storage, refrigerated container, cold room, heat exchanger -Manufacturer: Goedhart, industrial cooler type DVS-O 614010 -Fan diameter: 400 mm -Operating pressure: max. 5 bar -Operating temperature: max. 50°C -Dimensions: 1410/1170/H700 mm -Weight: 129 kg

Two-side evaporator Goedhart -Type: DVS-p-82637 -Cooling capacity: approx. 43 kW -Fin spinning: 7 mm -Fans: 2 x 630 mm -Dimensions: 2600 x 1820 x 750 mm -Volume: 76 L -Weight: 470 kg -Quantity in stock: 1 -Reference number: CH 604 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Evaporator Goedhart -Type: VRB 82457 -Cooling capacity: 20 kW -Fin spinning: 7 mm -Fans: 2 x 450 mm -Dimensions: 2060 x 900 x 750 mm -Stainless steel housing and block -Electric heating -Volume: 34 L -Weight: 200 kg -Quantity in stock: 1 -Reference number: CH 602 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Evaporator Goedhart -Type: VNS 65407 E -Cooling capacity: 27 kW at -8°C -Fin spinning: 7 mm -Electric defrost -Fans: 5 x 400 mm -Dimensions: 4200 x 800 x 600 mm -Volume: 44 L -Weight: 310 kg -Quantity in stock: 10 -Reference number: CH 598 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work

Evaporator Goedhart -Type: VRB 61507 -Cooling capacity: 14.5 kW -Fin spinning: 7 mm -Fans: 1 x 500 mm -Dimensions: 1460 x 800 x 770 mm -Stainless steel housing and block -Volume: 17 L -Weight: 120 kg -Quantity in stock: 1 -Reference number: CH 601 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Evaporator Goedhart -Type: SRU 81507 -Cooling capacity: approx. 15 kW -Fin spinning: 7 mm -Fans: 1 x 500 mm -Dimensions: 1460 x 930 x 840 mm -Stainless steel housing and block -Electric defrost -Volume: 23 L -Weight: 140 kg -Quantity in stock: 2 -Reference number: CH 600 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Converter, power supply, power supply unit -Manufacturer: NorthTec GmbH -Type: VCC 3 -Number: 1x available -Price: per piece -Dimensions: 440/255/H135 mm -Weight: 3.1 kg/piece

Shimadzu TOC VCPH with SSM-5000A solids module and ASI-V autosampler as liquid propene encoder, software

Type New Bowl choppers Height 1750 Width 2250 mm Length 2000 mm Weight 3100 kg Capacity 120 l Voltage Electrical: 400V 50Hz 3N Installed Power 52 kw Main material Stainlees Steel

Year of construction 2008 Price on request

Heraeus Vötsch Climate Test Chamber Here we offer you Heraeus Vötsch climate test chamber. Temperature Climate Test Chamber Air Cooled Standard: Touch panel and independent, adjustable temperature limiter 32 Bit S! MPAC* control with touch panel Potential-free contact for test material shutdown Independent, adjustable temperature limiter tmin/tmax Psychrometric humidity measurement system Interface TCP/IP 1 pipe feedthrough 50 mm Refrigeration circuit air-cooled Coolant R23 & R404A Temperature range -70 to +180°C Temperature deviation over time ±0.3 to ±1.0 K Temperature homogeneity spatially ±0.5 to ±2.0 K Change speed heating 3.5 K/min Change speed cooling 2.5 K/min Services for climate tests: Humidity range 10 to 98% Test room dimensions: Width 470 mm Depth 345 mm Height 400 mm External dimensions: width 760 mm depth ...

Inauen Maschinen AG Diptank Model: VC999 Stainless dip tank, chamber size 600mm L x 400mm W x 300mm H, digital temp control, mobile, 3Ph

Plasma Cutter VCS 2000, HiPerformance Plasma HPR 260 XD and suction Filtercube 4H 7500 m³/h volume flow. To be visited in operation.

For sale : 1000ml SLIM conversion kit for A3flex machine. I send photos by email.

For sale : 200/250 ml Square conversion kit for A3flex machine. I send photos by email.

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCE-B Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 75 kW Hydraulic oil 40/45 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 1 Tool Kemp model TT-188 (year 2019) hot runner. Weight 12850 kgs

LWB Steinl Injection Moulding / Vulcanizing Presses Models available: VCEFE-B and VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Weight 13500 kgs

LWB Steinl Injection Moulding / Vulcanizing Press Model: VCEFE Clamping force 2500kN Injection volume 1000 cm3 Compressed air 6 bar 76 kW Hydraulic oil 46/40 cst Pattern size 760 x 630mm LWB Flex touch screen Qty 2 Tool Kemp model TT-188 Year 2013 Weight 13500 kgs

Ref. -No.: 10356 Manufacturer: AGIE CHARMILLES Year of construction: 2007 Type of control: CNC Control: iTNC530 Country of origin: Schweiz X-Travel: 800 mm Y-Travel: 500 mm Z-Travel: 540 mm Main spindle speed range: 16000 RPM Table Dimensions (Lengthxwidth): 910x500 mm Table Load: Vmax = 500kg, 5m/min = 1100kg kg Number of T-slots: 5 Tool change time (chip-to-chip): 8 s Max. Tool Weight: 6 kg Max. Tool Length: 305 mm Max. Tool Diameter: 77 mm Tool change time: 6 s T - slot spacing: 100 mm Numbers Of Tools In Magazin: 24 Tool changer: Doppelarm, seitlich montiert Rapid Traverse X-Axis: 24 m / min Rapid Travel Y-Axis: 24 m / min Rapid Traverse Z-Axis: 20 m / min Further information: Addition: probe

Table size 900x400 mm X Travel 750 mm Y, Travel 450 mm Z Travel 450 mm Spindle speed 12.000 rpm Controller Siemens 840D Sl Spindle taper SK40 Number of tools in magazine 24 Can be tested under power