GRAULE zs used machines

Graule ZS170N 3D - Tilt and pan controlled with Tigerdrive Manufacturer: Graule Type: ZS170N 3D Mach. No 2014/78/27 Year of construction 2014 Graule ZS170N Motor: 3 kW Saw blade: ø420 mm Axle: ø40 mm Saw height: 170mm Angle adjustment: 45 - 90 - 25° (controlled) Tilt: 0 to 45° (controlled) Sawing line: 450mm at 90°310mm at 45° rotation Saw blade: ø420*40*48 WZ Neg. (used) Machine stand: Included

Crosscut and mitre saw, pull saw, crosscut saw, aluminum circular saw, metal circular saw, metal cutting saw, underfloor circular saw with double mitre, aluminum crosscut saw, underfloor saw, aluminum circular saw, aluminum semi-automatic circular saw, crosscut saw, glazing bead saw -Manufacturer: Graule Type ZS135 -Engine power: 2 kW -Speed: 2700 rpm -Saw blade: Ø 350 mm, pivoting -Cutting area: 90° flat 430 x 135 mm -Cutting area: 45° flat 300 x 135 mm -Transport dimensions: 1150/910/H1200 mm -Weight: 185 kg with pallet

Graul zs170N with 3 KW motor, wheel adjustment tilt front, or rear Machine stand, oil brake, printer, digital angle display horizontal and/or vertical

Pull saw on substructure with mobile device (support table / wooden system) Further dates will follow. The sale is carried out on behalf of the owner from the current location in the "current state"

Key data: 420 mm, 170 mm, 115 mm

400 Volt three-phase brake motor Saw blade diameter 420 mm, Saw blade holder 40 mm, Cutting height 170 mm, Saw blade inclined to 45°: cutting height 115 mm , Cutting length 410 mm INCLUDED: Machine can be tilted from the front on both sides via hand crank Additional price for 3 kW 400 volt motor Hydraulic feed brake Laser setup Pneum. Material tension on both sides, from above Carbide circular saw blade 420x3.4/2.4 x40 mm 48 WZ neg Machine stand

Cutting height at 90Â: 135 mm; Cutting length: mm; Miter range horizontal: -; Vertical mitre range: -60Â to +60Â; Roller conveyor / support table: no; Saw blade diameter: Speed: 2800rpm; Motor power: 2 kW; Engine brake: yes; Hold-down: yes; Spraying device: yes; Suction port: 100mm; Machine length: Machine width: Weight: 110kg;

Cutting height at 90Â: 170 mm; Cutting length: 430 mm; Miter range horizontal: 45Â-90Â-25Â; Vertical mitre range: 60Â - 90Â - 30Â; Swivel adjustment with crank: yes; Roller conveyor / support table: yes; Saw blade diameter: 420 mm; Speed: 2800rpm; Motor power: 3 kW; Engine brake: yes; Suction port: 100mm; Length of roller conveyor: 2 x 1500 mm; Machine length: 4000 mm; Machine width: 1250 mm; Machine height: 1550 mm; Weight:

cutting height at 90°: 200 mm; cutting length: 440 mm; miter vertikal: -60° bis +60°; sawblade diameter: 500 mm; speed: 2800U/min; motor power: 5 kW; motor brake: yes; suction connection: 100mm; machine length: machine width: weight: 110kg;

cutting height at 90°: 200 mm; cutting length: 440 mm; miter vertikal: -60° bis +60°; sawblade diameter: 500 mm; speed: 2800U/min; motor power: 5 kW; motor brake: yes; suction connection: 100mm; machine length: machine width: weight: 110kg;

End milling machine GRAULE AKF 6/250 Single head saw GRAULE ZS 170N Copy router MECAL FR 811 Corner crimper WEGOMA EV 175

Graule ZS 135 Pull Saw - Technically outdated - 400V version - With brake motor - With saw blade protection - new support plate, original Graule - without base frame

Graule ZS 135N Cutting and mitre saws Motor 400 V / 2.0 kW Speed 3800 RPM Cutting length 440 mm (at 90 °) Cutting height 135 mm (at 90 °) Miter range: horizontal 45 °-90 °-25 ° Guide area: vertical 90 °-45 ° (left) Saw blade ø 350 mm Dust nozzle 100 mm Weight 100 kg

Graule ZS 170N Cutting and mitre saws Motor 400 V / 2.0 kW Speed 3500 RPM Cutting length 430 mm (at 90 °) Cutting height 170 mm (at 90 °) Miter range: horizontal 45 °-90 °-25 ° Guide area: vertical 90 °-45 ° (left) Saw blade ø 420 mm Dust nozzle 100 mm Weight 120 kg

Graule ZS 170NF Cutting and miter circular saws Motor 400 V / 2.0 kW Speed 3500 rpm Cutting length 430 mm (at 90°) Cutting height 170 mm (at 90°) Miter range: horizontal 45°-90°-25° Miter range: vertical 90°-45° (left) Saw blade s. 420 mm Suction nozzle 100 mm Weight 120 kg

Graule ZS 200N Cutting and miter circular saws Motor 400 V / 3.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range: horizontal 45°-90°-20° Miter range: vertical 60° -90°-45° Saw blade s. 520 mm Suction nozzle 100 mm Weight 310 kg G&GA-ZS200N-3KW Underframe optional

Graule AKF 6/250 - Year of construction 1999 - Engine brake - very good condition - technically tested and fully functional

Mitre saw Brand: Graule Type: H8 J2 169 saw blade Ø 250mm swivable saw blade 45 °

Graule ZS 135 with roller conveyor and length stop

Graule ZS 170 with roller conveyor and length stop

cutting width: 330 mm Cutting height: 135 mm Motor output: 2,2 kW The Graule type ZS 135 cross-cut saw is a pivoting cross-cut saw for cutting to length and mitre cuts. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting height: ~ 135 mm cutting length: ~ 460 mm engine: 2 kW connected load frequency: 380 V Graule ZS 135 N crosscut and miter saw for precise crosscutting and miter cutting of solid wood, moldings, and profiles with a high cutting height. It is swiveling and tilting. Its robust construction and precise angle adjustment enable clean and repeatable cuts in craftwork and workshop production. Ideal for all woodworking businesses. Includes base frame. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cut-to-length and mitre circular saw GRAULE ZS 200N very good condition, as good as new, the machine has only a few signs of use Cutting height: 200mm at 90° Cutting length: 420mm at 90° Year of Make: 1997 can be swivelled on both sides, to the left up to 70° and to the right up to 45° with grids at 90° and at 45° and with a very accurate scale can also be tilted on both sides with a worm gear gear, to the left up to 60° and to the right up to 45° the saw comes from a small advertising company and was almost never used there, only from time to time aluminum profiles for light boxes were cut to length all angle and miter settings are very accurate the fixed stops can all be readjusted very precisely with hydraulic feed brake that is adjustable the ideal saw for precise and fast cutting of profiles, scantlings, squared timbers, boards, planks and similar things, very ...

Crosscut and miter saws with maximum cutting height of 200 mm stable grey cast iron construction precise ball bushing guide of the tool slide on hardened and ground steel shafts Manual saw feed fast up to 65 ° horizontal MITRE setting and 60 ° vertical for adjustable fixed stops lower blade guard to extractor can be connected Machine mounted on mobile machine base with 1,5 mtr. long rollers left and right left side with scale and stop position slider Technical data: Engine: 400 V / 5.0 kW Speed: 2800 RPM Cutting length: 420 mm (at 90 °) Cutting height: 200 mm (at 90 °) Miter range horizontal: 45°-90° - 20 ° Miter range vertical: 60° - 90°-30° Saw blade diameter: 520 mm Dust nozzle: 100 mm Weight: 490 kg

- 400 Volt, three-phase motor with brake, 2 kW - 420 mm disc - cutting height 170 mm - cutting length 410 mm - hydraulic feed brake - cooling system - compressed air preparation station - pneumatic pressure on both sides

Length stop with roller conveyor Length: 3 meters Handwheel adjustment Measuring tape with magnifying glass