GUNTNER gh used machines

Cool Guntner Type: GHNE 065C / 28 Cooling capacity: 30 kW with DT8, 23 kW with DT7 Fin spinning: 8 mm Electric heaters Number of fans: 2 x 650 mm Device dimensions: 3000 x 750 x 1000 mm Refrigerant: Freon Capacity: 46 L Stock status: 5 pieces Stock number: CH 236 Condition: Used Price on request, We have many other Kealteanlagen : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Evaporator Guntner Type: GHN 050C/38 Cooling capacity: 29.6 kW at DT8, 23.2 kW at DT7 Fin spinning: 8 mm Fans: 3 x 500 mm Dimensions: 3650 x 650 x 650 mm Volume: 37.8 L Quantity in stock: 18 Reference number: CH 538 Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Evaporator Guntner -Type: S-GHN 080.2H/212-END50.E -Cooling capacity: 61.5 kW at DT8, 49.3 kW at DT7 -Fin spinning: 12 mm -Fans: 2 x 800 mm -Dimensions: 3970 x 1120 x 1400 mm -Electric defrost -Refrigerant: Freon -Volume: 115 L -Weight: 518 kg -Quantity in stock: 1 -Reference number: CH 588 -Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Evaporator Guntner -Type: S-GHNE 066C/17 -Cooling capacity: 16.8 kW at DT8, 13.3 kW at DT7 -Fin spinning: 7 mm -Electric defrost -Fans: 1 x 660 mm -Dimensions: 1880 x 780 x 970 mm -Quantity in stock: 3 -Reference number: CH 577 -Condition: Used in good condition, evaporator 100% tight under nitrogen, fans working, ready to work

Guntner condensator 150kW GVHX080,1B/2x1-MD.E 1200Eur Guntner condensator 264kW GVHX080,1B/2x2-MD.E 1400Eur Guntner condensator 289kW GVHX080,1B/2x2-ND.E 1500Eur Guntner condensator 32kW GVHX 050.1A/1-ND.E - 400Eur Guntner condensator 17kW GVM 040.1B/2-NW.E - 180Eur 2sht Guntner condensator 20kW GVM 040.1C/2-NW.E - 200Eur 3sht Guntner condensator 50kW GVH065.1A/2-X.E- 600Eur 1sht KUBA CA.06-1x2F OHNE VENT.E. 35kW - 700Eur LUVE SHVN 48/8 45kW - 400Eur LUVE SHVN 57/0 55kW - 500Eur LUVE SHVN 157 H/V 155kW - 1800Eur DT15K R404a VERY GOOD CONDITION!!!!!

For Sale: Mahler Continuous Furnace with Güntner Cooler Mahler Continuous Furnace - Manufacturer: MAHLER - Type: DLE 800/220/3000 G - Heat Power: 172 kW - Nominal Temperature: 1120 °C - Year of Construction: 2014 - Certification: CE Güntner Cooler - Manufacturer: Güntner - Model: GFDC WD 080.1/14-42-3980105M - Year of Manufacture: 2021 - Volume: 133.6 liters - Max. Permissible Pressure: 10 / 0 bar - Permissible Temperature Range: -50 °C to +100 °C - Ambient Temperature Range: -30 °C to +50 °C - Fan: VT03061U.1 / 2448 / 630 min⁻¹ / 2.1 A - Test Pressure: 11 bar (Compressed air) - Test Date: 2021-03-15 - Fluid Group / State: 2 / Liquid Find more here - / Contact us at -

Condenser Guntner Type: GVH 090.2A/2x5-N(D) Cooling capacity: 1057,2 / 920.7 kW Air flow: 279 000/229 000 m3/h Number of fans: 10 x 900 mm Dimensions: 10200 x 2300 x 1450 mm RPM: 890/700 Volume: 323.8 L Quantity in stock: 2 Stock number: SK 108 Condition: Used

Condenser Guntner Type: GVH 066C/3L Cooling capacity: 120 kW Number of fans: 3 x 630 mm RPM: 540 / 330 Dimensions: 4350 x 1100 x 1550 mm Entry/exit diameter: 22 / 32 mm Quantity in stock: 2 Stock number: SK 158 Condition: Used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Condenser GUNTNER Type: S-GVH 080.3B/4-SD.E Cooling capacity: 155 / 114 kW Air flow: 36 200 / 24 400 m3/h Number of fans: 4 x 800 mm RPM: 440/340 Dimensions: 9700 x 1150 x 1650 mm Entry/exit diameter: 54 / 54 mm Weight: 930 kg Quantity in stock: 1 Stock number: SK 157 Condition: Used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Condenser Guntner -Type: GVH 082B/3N(D) -Cooling capacity: 227 kW -Number of fans: 3 x 820 mm -Dimensions: 5300 x 1200 x 19500 mm -Quantity in stock: 1 -Stock number: SK 165 -Condition: Used in very good condition / fans tested / under nitrogen pressure

Two-side evaporator Guntner -Type: S-GBK 050.2B/47-EW.E -Cooling capacity: 40 kW at DT 10K (0°C), 35 kW at DT 9K (-2°C) -Fin spinning: 7 mm -Fans: 4 x 500 mm -Dimensions: 5500 x 1100 x 660 mm -Stainless steel housing and block -Electric defrost -Year of production: 2018 -Volume: 37.4 L -Quantity in stock: 1 -Reference number: CH 574 -Condition: Used in good condition, evaporator 100% tight, fans working, ready to work

Condenser GUENTNER Type: S GVH 080.1A/2x5 L(S) Cooling capacity: 673.4 kW Air volume flow: 151 000 m3/h Number of fans: 10 x 800 mm Dimensions: 10000 mm x 2300 mm x 1800 mm Volume: 300.3 l Number of pieces in stock: 2 Reference number: SK13 Condition : Used in good condition Price on request, We have many other Kealte plants : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

water cooler, table cooler, recooler make Güntner, approx.1000KW cooling capacity, Device with 12 fans,throughmeser 1000mm. 416 litres capacity. 12000mm length, 2400mm width, 1500mm height, 8 feet, weight 2950KG.

Cool Guntner Type: GHN080.2F/210-E Cooling capacity: 54 kW at DT8, 43 kW at DT7 Surface: 235 m2 Air flow: 37 320 m3/h Fin spinning: 10 mm Electric heaters Fans: 2 x 800 mm Dimensions: 4000 x 900 x 1300 mm Refrigerant: Freon Volume: 86.5 l Waga: 460 kg Items in stock: 3 Reference number: CH 392 Price on request, We have many other equipment : Bitzer, Copeland, Frascold, Lunite, Kueba, Guentner, Eco, Alfa-Laval, Goedhart, Helpman

manufacturer: REXROTH, 3-steps, max.: 150 bar, tank: 350 l, year: 1983

CEE plug -4-pin connector -16 A -Type: GHG 531 7406 V 0 -EX Protected -Weight: 0.5 kg

CEE wall socket -Construction -5 pole -Type: GHG 531 4506 V0000 -EX Protected -Weight: 0.5 kg

Impact mill, year of construction is 1970. Repaired, all wear parts replaced. In very good condition.

Mower containers and mulchers Working width 1.50 m, 3-point attachment cat. I/II, for PTO 540 rpm. Capacity approx. 2500 ltr. Equipment: Height-adjustable front wheels, support roller, height-adjustable rear landing gear. (3 hydraulic connections required (dw/ew). Lighting system according to StVZO. For mowing and/or scarifying (scarifying knife optional required) of grassy areas. The mown material - including horse droppings and leaves - can be picked up and then transported away at the same time. Required tractor power: 26 kw / 35 hp. High stability during the tipping process and problem-free road transport due to rear landing gear. Emptying height max. approx. 2.20 m (factory specifications). Age-related wear and tear and paint defects/rust present, but still operational. Alternatively, we also offer Reiser mowing containers with a working width of 1.30 or 1.50 m as well as a W ...

BRAND: GEMINIS YEAR: 2010 MODEL: GHT 11 G4 2200X8000 APPLICATION TYPE: TURNING LOCATION: SPAIN MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: FAGOR MODEL: 8070 MAIN DRIVE NUMBER OF SPINDLES: 1 NUMBER OF AXIS: 2 MOVEMENT Z-AXIS MOVEMENT: 8000 MM WORKPIECE WORKPIECE DRM: 2200 MM WORKPIECE WEIGHT: 25000 KG TOOLS SLOTS IN STORAGE: 8 Additional Equipment - STEADY REST - CHIP EXTRACTOR - ELECTRONIC HANDWHEEL - MACHINE LEVELING SUPPORTS - VARIOUS TURRET TOOL HOLDERS Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - SPINDLE BORE 162 MM - CROSS SLIDE TRAVEL 1130 MM QUALITATIVE MACHINE BENEFITS: - VERY GOOD STATUS

Günther air cooler for the ceiling or for the wall

One used flexible welding line EVG GH400 for the production of standard and special truss girders (e.g. shear reinforcement girders or decking girders) in mid-size to small series

table length: 3000 mm table width: 1500 mm burner heads: 1 Control: CNC workpiece weight: 1500 kg traversing speed: 200 m/min total power requirement: 55 kW dimensions of the machine ca.: 10050 x 4920 x 2200 mm CUTTING CAPACITY: STRUCTURAL STEEL 25 mm STAINLESS STEEL 15 mm ALUMINUM 12mm BRASS 8mm COPPER 8mm MACHINE AXES: 4 axes [X, Y, Z, U ] CUTTING HEAD: Precitec ProCutter CAD/CAM SOFTWARE: LANTEK EXPERT CUT *4 servo motors for all axial movements *CNC CONTROL PANEL 15 5” touch screen *IPG laser sources and coolers integrated *Precitec Procutter cutting head system *AIR FILTER (compressed air filter) *CONVEYOR BELT under cutting area *Closed housing and specially coated filter protection windows *LOADING / DISCHARGING SYSTEM *PROPORTIONAL GAS AND PIPE SYSTEM The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Make: THERMOKEY Type: GH249CXD/02VQRAFS Year of Make: 2019 Volume: 349 liters Pressure: 10 bar Max. temperature: +95 °C Min. temperature: -40 °C Fan: Ø 900mm with 8 fans AKAD 900-6-6 A2 incl. speed control via SELPRO frequency converter and temperature sensor (from 0%-100%) incl. wiring up to the control cabinet 2 pcs. available Price on request! Contact: Coman Teofil Phone: +436641838175 E-mail: infofrigocom.at

One used Filzmoser GH300 girder line Flexible welding line for the production of standard and special truss girders (e.g. shear reinforcement girders or decking girders) in mid-size to small series Girder hights: 80 to 300mm Girder length: up to 14.000mm