6 HAAS cnc turning machines used machines

Inv. Num. : 8856 Type: SL-10 THE Producer: HAAS Created: 2006 Parameters: Switch-on hours: 23550 h Hours: 13463 h Maximum turning length: 355 mm Maximum turning diameter: 279 mm Maximum turning diameter over bed: 252 mm Maximum turning diameter over support: 203 mm Maximum length of travel in the X-axis: 159 mm Max. travel length of the Z-axis: 356 mm Maximum spindle speed: 6000 1/min Weight: 2500 kg Equipment: Collet chuck Universal chuck

The machine is in very good technical condition, testing is possible by prior arrangement.

The machine is in good technical condition, testing is possible by prior arrangement.

Key data: 406 mm, 584 mm

Inv. Num. : 9153 Type: DS-30SSY Producer: HAAS Created: 2015 Parameters: Hours: 3002 h Maximum turning length: 584.2 mm Maximum turning diameter: 406.4 mm Maximum turning diameter over bed: 807.7 mm X-axis travel: 317.5 mm Y-axis travel: 50.6 mm Travel Z-axis: 584 mm Maximum main spindle power: 14 kVA Maximum spindle speed: 4800 1/min Number of all tools: 24 pieces Spindle bore: 88.9 mm Weight: 7259 kg Equipment: Chip conveyor Pick-up spindle C-axis Bar Feeder Tool Alignment System System for removing parts after cutting Driven Axial Holder ER32 (Heimatec) Driven radial bracket ER32 (Heimatec) Holders for rotary tools, other holders and jaws

Key data: 298 mm, 572 mm, 4000 1/min

Inv. Num. : 9320 Type: ST 20Y Producer: HAAS Created: 2022 Parameters: Switch-on hours: 1565 h Operating hours: 236 h Max. turning length: 572 mm Maximum turning diameter: 298 mm Grinding diameter: 533 mm Maximum length of travel in the X-axis: 213 mm Maximum length of travel in the Y-axis: 51 mm Maximum feed in the Z-axis: 572 mm Maximum spindle speed: 4000 1/min Maximum main spindle power: 14.9 kW Max. rod diameter: 64 mm Lathe chuck diameter: 210 mm Spindle bore: 88.9 mm Weight: 4754 kg

turning diameter: 432 mm turning length: 864 mm control: HAAS bar diameter: 76 mm 3-jaw-chuck diameter: 254 mm travel -z axis: 864 mm travel -x axis: 287 mm spindle speed:: 3400 1/min spindle bore: 88 mm swing over bed: 762 mm swing diameter over bed slide: 432 mm turret head: 12 Pos. VDI 40 tailstock travel: mm rapid traverse X-axis: m/min rapid traverse Z-axis: m/min drive capacity - spindle motor: 22 kW voltage: 400 V total power requirement: kW weight of the machine ca.: 7.250 t dimensions of the machine ca.: 3,90 x 2,00 x 1,90 m coolant: chip conveyor: - serial-no.: 3082298 - Machine Run Time: ---- h - control: HAAS - tool measuring arm - chip conveyor - collant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used industrial machine offered by IBEXTRA.

centre height: 175 mm centre distance: 300 mm number of spindle speeds: 2.000 - 8.000 control: SIEMENS 840D machine weight ab.: 7.500 kg surface area: 1.000 x 270 mm number of T-slots: 3 groove width: 12 H7 mm flute distance: 50 mm spindle diameter in front bearing: 55 mm Tool and Cutter Grinder | HAAS - MULTIGRIND AF1 Additional equipment: - Tool laser measuring system: Blum - Lasersystem MINI-MICRP-NANO The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: AF 1 | AF-1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stock number: 3951 PROCESSING Manufacturer: Haas, Type: VF-6B/40HE Machines NO.: 29222, Year of manufacture: 2002 Specifications: Table size 1626x711 mm Longitudinal movement (X) 1650 mm Transverse movement (Y) 800 mm Vertical movement (Z) 762 mm Spindle cone ISO 40 Spindle speeds 10000 rpm Controlled in axes 3 Operating hours spindle 17652 hours Accessories: Cooling by spindle Chip conveyance. Tool Measuring Length: 4000mm, Height: 3150mm, Width: 3000mm, Weight: 9800 kg

Haas Automation, VF2, Control : Micro-Haas VF2 X-1250mm, Y-508, Z-600, Spindle : SK40 , 10 - 7500 rpm , Feed rate : 0 - 4500mm/min, rapid traverse : 15m/min Table load : 1000kg Weight : 6to, L- 370cm, W330cm, H-290cm, No shift work !

Haas Automation, VF2, Control : Micro-Haas VF2 X-1250mm, Y-508, Z-600, Spindle : SK40 , 10 - 7500 rpm , Feed rate : 0 - 4500mm/min, rapid traverse : 15m/min Table load : 1000kg Weight : 6to, L- 370cm, W330cm, H-290cm, No shift work !

From September 2022 immediately available newly overhauled Multigrind HT retrofit machine prepared for resharpening hobs / worm gear cutters / pushers and cutting rotor Control: Siemens 840 D X - axis 650 mm Y - axis 400 mm Z - axis 280 mm A - axis (dividing apparatus) 360 ° SK50 C - axis (rotary table) 270 ° X3 - axle with tailstock Grinding spindle: HSK50 Dressing unit Tool changer: 10-fold magazine plate Coolant system: Turbo Separator Suction: LTA Extinguishing system Other accessories: Available ex works Software: Customer-specific delivery Financing / hire purchase possible.

HAAS EC-1600ZT CNC machining center was built in 2020 in the United States by the renowned brand HAAS AUTOMATION INC. Designed for machining of heavy workpieces weighing up to 4536 kg, the machine is the ideal combination of functionality, productivity and precision. In order to meet this challenge, the machine is equipped with a wide range of equipment such as a rotary table (4th axis), a two-stage spindle and a capacious magazine with automatic tool changer. The HAAS EC 1600ZT CNC horizontal machining center weight approximately 13472 kg. Technical specifications of the HAAS EC-1600ZT milling center - feed in the X/Y/Z axis: 1626/1270/1016 mm - feed in the B axis: 360° - rapid traverse in the X,Y,Z axis: 15.2 m/min - work table surface (L x W): 1626 x 914 mm - clamping plate diameter (rotary table): 762 mm - maximum workpiece weight: 4536 kg - maximum spindle rotational spee ...

x-axis: 700 mm y-axis: 410 mm z-axis: 500 mm feed range: 30000 mm/min A-Axis: 175 mm C-axis: 320 ° workpiece dia.: 340-500 mm workpiece length: 700-1000 mm workpiece weight max.: kg max. dia. of grinding wheel: mm speed spindle max.: 8000 U/min. power capacity: 11,5 / 14,5 kW Control: Siemens 840 Dsl tool taper: HSK 50E table-size: 1200 x 500 mm total power requirement: - kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3 x 2,6 x 3,55 m 5 AXIS CNC TOOL AND CUTTER GRINDER - CNC Control Siemens 840Dsl - Milling Unit – Tooling - high-pressure coolant system - Tool Changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 700 mm y-axis: 410 mm z-axis: 500 mm feed range: 30000 mm/min A-Axis: 175 mm C-axis: 320 ° workpiece dia.: 340-500 mm workpiece length: 700-1000 mm workpiece weight max.: kg max. dia. of grinding wheel: mm speed spindle max.: 8000 U/min. power capacity: 11,5 / 14,5 kW Control: Siemens 840 Dsl tool taper: HSK 50E table-size: 1200 x 500 mm total power requirement: - kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3 x 2,6 x 3,55 m 5 AXIS CNC TOOL AND CUTTER GRINDER - CNC Control Siemens 840Dsl - Milling Unit – Tooling - high-pressure coolant system - Tool Changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-axis: 700 mm y-axis: 410 mm z-axis: 500 mm feed range: 30000 mm/min A-Axis: 175 mm C-axis: 320 ° workpiece dia.: 340-500 mm workpiece length: 700-1000 mm workpiece weight max.: kg max. dia. of grinding wheel: mm speed spindle max.: 8000 U/min. power capacity: 11,5 / 14,5 kW Control: Siemens 840 Dsl tool taper: HSK 50E table-size: 1200 x 500 mm total power requirement: - kVA weight of the machine ca.: 8,5 t dimensions of the machine ca.: 3 x 2,6 x 3,55 m 5 AXIS CNC TOOL AND CUTTER GRINDER - CNC Control Siemens 840Dsl - Milling Unit – Tooling - high-pressure coolant system - Tool Changer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Haas Model: HSZ-R 500 x 1800 Year of Manufacture: 2008 Type of Machine : Wet Hammer Mil Condition : Used Technical Specifications - Rotor diameter: 1300 mm - Machine inlet width: 1800 mm - Screen perforation (as delivered): 16 mm diameter - Number of hammer tools (full complement): 440 pieces - Grinding bars zone 1 (Mahlleisten Ml.1): 54 pieces - Grinding bars zone 2 (Mahlleisten Ml.2): 42 pieces - Total machine weight (including motor): approx. 12,350 kg - Feed trough weight: approx. 1,100 kg - Sound power level (at full load, 5 m distance): 90 dB(A) - Hydraulic unit (hood opening system): 1.5 kW, 230/400 V, 50 Hz Overall Dimensions - Length: 4790 mm - Width: 2700 mm - Height: 4145 mm Find more here - .ucymachines/ Contact us at - sales@ucymachines

Reinecker Universal Tool Grinding Machine WZS-50 CNC Precision Grinding Machine Profile Grinding Machine Hersteller [manufacturer]: Reinecker Type [ type]: WZS-50 CNC Control unit: Siemens Sinumerik 880G Baujahr[construction year]: 10/1992 Incl. extinguishing system Incl. various accessories Travel axis: X – Y – Z – C – E Interface Type: E32R Weight [weight]: 3000kg Approx. (L x D x H): 3m x 3m x 3m Full documentation is available. Inspection under power can be done at short notice. We will be happy to answer any further questions you may have. Price, from stock here plus VAT. Condition: good - ready for demonstration Delivery: from stock - as seen Payment: purely net - upon receipt of invoice Prior sale, errors excepted. We ask for your order. Other machines and systems available from stock – please inquire. We look forward to seeing you. Phon ...

Haas UHS 1980 FL Universal Hand Lever Flat Grinder - Tip height 125 mm - Center width 450 mm (optional up to 600 mm) - Grinding length 350 mm - Table clamping area 800 x 115 mm - Max. workpiece weight: approx. 40 kg - Longitudinal movement (X-axis) 350 mm - Transverse movement (Y-axis) 180 mm - Height adjustment (Z-axis) 250 mm - Swivel (horizontal) 360° - Tiltability (vertical) ± 15° to 20° - Spindle speeds 2,800 / 5,600 rpm (gradual) - Drive power 0.75 kW - 1.1 kW - Grinding wheel holder cone 1:10 (standard) - Connection 400 V / 50 Hz - Magnet LxW 255 x 150 mm LxWxH 0.9x1.0x1.4 meters / Weight 650 kg

We are selling a Haas ST-20 turning center on behalf of a customer. The machine was installed and never put into production., - Control Options, - Options package, - High-pressure coolant flow, - Accessory package

HAAS DS-30 CNC lathe was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, designed for machining workpieces with a maximum diameter of 457 mm, offers excellent efficiency, reliability and precision. Inside a large workspace there are two spindles with a C-axis, which enable the machining of both sides of a workpiece in a single work cycle. The tool head, in turn, allows for the attachment of both fixed and driven tools. This solution increases the flexibility of the machine by enabling it to be adapted to specific production needs. All this is complemented by advanced CNC control with many useful functions. The HAAS DS30 CNC turning center weighs 7221 kg. Technical specifications of the HAAS DS-30 metal lathe - maximum turning diameter: 457 mm - maximum turning length: 660 mm - swing over bed: 806 mm - swing over cross slide: 527 mm - feed in the X/Z axis: ...

HAAS ST-15 CNC lathe was built in 2020 in the United States by HAAS AUTOMATION, INC. This highly efficient machine with a compact design is an excellent choice for both unit and series production. Workpieces with a maximum length of 406 mm are machined inside a large workspace by means of a high-speed spindle and precision cutting tools, taken from a 12-position turret. All this is complemented by intelligent CNC control, in which advanced machining programmes are created in just a few steps. The HAAS ST15 CNC turning center weighs 3584 kg. Technical specifications of the HAAS ST-15 metal lathe - CNC controller: HAAS - swing over over bed: 419 mm - bar diameter: 64 mm - maximum turning length: 406 mm - feed in the X/Z axis: 200/406 mm - rapid traverse in the X,Z axis: 30.5 m/min - thrust force in the X,Z axis: 14679 N - maximum spindle rotational speed: 4000 rpm - maximum spi ...

HAAS ST-20Y CNC lathe was built in 2022 in the United States by Haas Automation Inc. The machine has only worked for 119 hours to date and is like brand new. The HAAS ST-20Y is an excellent choice for the modern business. This is because it makes it possible to perform versatile 4-axis machining of the highest quality on any workpiece. All machining processes, i.e. milling, threading and drilling are performed by means of driven tools and a spindle with synchronised C axis. The 12-position BMT turret offers high productivity thanks to the larger contact area between tooling, toolholder and the turret itself. The operator, on the other hand, has at their disposal an advanced HAAS CNC control with a Visual Programming System (VPS), which significantly improves the daily operation of the machine. The VPS uses graphical templates to facilitate the creation of G-codes for even the most  ...

HAAS ST-30 CNC turning center was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, distinguished by its high reliability and precision, is perfect for both unit and series production. It is capable of performing a number of complex operations, such as precision turning or threading of workpieces. All these machining processes are performed inside a large, fully illuminated work area by means of a powerful spindle and cutting tools. The spindle, driven by a high-powered motor, rotates at a maximum speed of 2400 rpm and moves in two X,Z axes with feeds of 457 mm and 584 mm respectively. To guarantee maximum machining precision, each tool taken from the 12-position turret is continuously measured and calibrated by a measuring probe. The hydraulic tailstock, in turn, ensures precise positioning and support of the workpiece during the work cycle. The HAAS ST-30 feat ...

Turning diameter: 430mm, max. swing diameter over bed: 760mm, max. turning length: 860mm, center distance: 990mm, travel X/Y: 280mm/860mm, speed: 3400rpm, chuck diameter: 12inch, tool stations: 12. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/1900mm, weight: approx. 6500kg. Documentation available. An on-site inspection is possible.