HAAS vf used machines

BRAND: HAAS YEAR: 2019 MODEL: VF2 PRODUCTION HOURS: 1434 APPLICATION TYPE: MILLING LOCATION: LATVIA MACHINE TYPE: MILLING MACHINE AVAILABILITY: IMMEDIATELY CONTROL UNIT BRAND: HAAS GINDUMAC ID: LV-MIL-HAA-2019-00001 Technical Information CONTROL UNIT BRAND: HAAS MAIN DRIVE SPINDLE SPEED RANGE: 8100 1/MIN MOVEMENT X-AXIS MOVEMENT: 762 MM Y-AXIS MOVEMENT: 406 MM Z-AXIS MOVEMENT: 508 MM TABLE OUTER LENGTH: 914 MM OUTER WIDTH: 356 MM TOOLS SLOTS IN STORAGE: 20

Manufacturer: HAAS Model: VF6 SS Year of Manufacture: 2008 Machine Type : Vertical Machining Center - Control: Haas CNC Axis Travels - X axis: 64 inches (1,625 mm) - Y axis: 32 inches (813 mm) - Z axis: 30 inches (762 mm) Spindle - Spindle speed: 12,000 RPM - Spindle taper: 40 taper (CT40 / BT40) - Spindle type: inline direct-drive, high-efficiency (HE) - Spindle motor: 30 HP Tool Changer - Type: side-mount automatic tool changer (SMTC) - Configuration: high-speed Super Speed ATC Electrical Requirements - Voltage: 360/480V - Phase: 3-phase - Frequency: 50/60 Hz - Full load: 40 amps - Largest load / short circuit: 70 amps - Interrupting capacity: 10,000 amps - Enclosure: NEMA Type 1 - indoor use only Find more here - / Contact us at -

Inv. Num. : 7562 Type: VF2 Produzent: HAAS Erzeugt: 2006 Parametern: Steuerungssystem: HAAS AUTOMATION Arbeitstischlänge: 914 mm Arbeitstischbreite: 356 mm Maximale Tischbelastung (gleichmäßig): 1361 kg Verfahrwege X-Achse: 762 mm Verfahrwege Y-Achse: 406 mm Verfahrwege Z-Achse: 508 mm Spindelleistung: 22.4 kW Maschinengewicht: 3539 kg

Haas Automation, VF2, Control : Micro-Haas VF2 X-1250mm, Y-508, Z-600, Spindle : SK40 , 10 - 7500 rpm , Feed rate : 0 - 4500mm/min, rapid traverse : 15m/min Table load : 1000kg Weight : 6to, L- 370cm, W330cm, H-290cm, No shift work !

x-travel: 2134 mm y-travel: 1016 mm z-travel: 762 mm CNC-control: HAAS CNC Table dimensions: 2134 x 914 mm max. table load: 1814 kg spindle taper: SK 50 spindle turning speed range: 7500 U/min spindle motor: 22,4 kW feed range: 1270 mm/min rapid traverse: 15,2 m/min tool change unit: 30 Pos. coolant: IKZ voltage: 400 V total power requirement: kW weight of the machine ca.: 13,2 t dimensions of the machine ca.: 4,70 x 2,95 x 2,99 m chip conveyor: - Serial No.:1099476 - Year of manufacture 11/2012 - Through spindle coolant TSC - 5-Axis pivotable rotary table HAAS TR310 (as new condition) PRICE FOR MACHINE WITHOUT ROTARY TABLE TR310: 82.000,- EUR The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis HAAS VF4SS vertical machining center was manufactured in 2019. It features a spindle with a maximum speed of 12,000 rpm and a power of 22.4 kW. The machine offers a travel range of X=1270 mm, Y=508 mm, Z=635 mm, and a rapid feedrate of 35.6 m/min on all axes. The table can support up to 794 kg. Consider the opportunity to buy this HAAS VF4SS vertical machining center. Contact us for more information.

This 3-axis HAAS VF3 SS Machining Center was manufactured in 2017. It features a robust 1219 mm x 457 mm table, capable of handling up to 794 kg. Equipped with a high-speed spindle reaching 12000 rpm and a 30+1 side-mount tool changer for efficient operation. Ideal for precision tasks with rapid movements up to 35.6 m/min on all axes. A great opportunity to buy this HAAS VF3 SS Machining Center. For more information about this Machining Center, please reach out to us.

This 3s HAAS VF-5/40 vertical machining centre was manufactured in 2023. It features an impressive X-Axis travel of 1270 mm, Y-Axis travel of 660 mm, and Z-Axis travel of 635 mm, making it suitable for various machining tasks. With a spindle speed of 8100 rpm and a tool changer capacity of 20/24+1 stations, consider the opportunity to buy this HAAS VF5/40 vertical machining centre. Contact us for further details.

BRAND: HAAS YEAR: 2015 MODEL: VF2SS APPLICATION TYPE: MILLING LOCATION: SPAIN MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information MAIN DRIVE SPINDLE SPEED RANGE: 12000 1/MIN SPINDLE MOTOR POWER: 22.4 KW NUMBER OF AXIS: 3 MOVEMENT X-AXIS MOVEMENT: 762 MM Y-AXIS MOVEMENT: 406 MM Z-AXIS MOVEMENT: 508 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - NOSE OF SPINDLE TO TABLE (~ MAX. ) 610 MM - SPINDLE NOSE TO TABLE (~ MIN. ) 102 MM - MAX. TORQUE 122. 0 NM @ 2000 RPM, LENGTH 914 MM , WIDTH 356 MM - T-SLOT WIDTH 15. 90 MM TO 16. 00 MM - WHEELBASE WITH T-SLOT 125 MM - NUMBER OF STANDARD T-SLOTS 3 - MAX. TABLE WEIGHT (EVENLY DISTRIBUTED) 680 KG QUALITATIVE MACHINE BENEFITS: - EXTENDED HARD DISK - PROGRAMMABLE COOLING - HIGH-SPEED PARAMETERS - CHIP EXTRACTOR - RENISHAW PROBE - EXTENDED M FUNC ...

Travel X/Y/Z: 1016mm/508mm/635mm, speed: 10000rpm, table dimensions X/Y: 1219mm/457mm, max. table load: 1550kg, tool positions: 20, rapid traverse X/Y/Z: 25m/min/25m/min/25m/min. Machine dimensions X/Y/Z: approx. 4000mm/2800mm/2600mm, weight: approx. 5400kg. Documentation available. On-site inspection is possible.

WORKING RANGE -CUBIC-   X-axis travel: 1270 mm   Y-axis travel: 660 mm   Z-axis travel: 635 mm SPINDLE / HEAD   spindle revolutions (max): 7500 /min BASIC FUNCTIONS   number of spindles: 1   number of turrets: 0   live positions: yes   number of c-axes: 0   number of y-axes: 1   number of b-axes: 0 ATTACHMENTS   chip conveyor: yes WORKING RANGE TURNING   swing diameter (max): 635 mm   worpiece length max.: 1372 mm   workpiece weight max.: 1814 kg MAIN SPINDLE   spindle revolutions (min): 0.001 /min   spindle revolutions (max): 7500 /min X/Z SLIDE   Z-axis travel: 635 mm   X-axis travel: 1270 mm   Y-axis travel: 660 mm TOOL MAGAZINE   tool diameter max.: 178 mm   tool length m ...

x-travel: 508 mm y-travel: 508 mm z-travel: 508 mm total power requirement: kW weight of the machine ca.: 3650 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

HAAS EC-1600ZT CNC machining center was built in 2020 in the United States by the renowned brand HAAS AUTOMATION INC. Designed for machining of heavy workpieces weighing up to 4536 kg, the machine is the ideal combination of functionality, productivity and precision. In order to meet this challenge, the machine is equipped with a wide range of equipment such as a rotary table (4th axis), a two-stage spindle and a capacious magazine with automatic tool changer. The HAAS EC 1600ZT CNC horizontal machining center weight approximately 13472 kg. Technical specifications of the HAAS EC-1600ZT milling center - feed in the X/Y/Z axis: 1626/1270/1016 mm - feed in the B axis: 360° - rapid traverse in the X,Y,Z axis: 15.2 m/min - work table surface (L x W): 1626 x 914 mm - clamping plate diameter (rotary table): 762 mm - maximum workpiece weight: 4536 kg - maximum spindle rotational spee ...

HAAS DS-30 CNC lathe was built in 2013 in the United States by HAAS AUTOMATION, INC. The machine, designed for machining workpieces with a maximum diameter of 457 mm, offers excellent efficiency, reliability and precision. Inside a large workspace there are two spindles with a C-axis, which enable the machining of both sides of a workpiece in a single work cycle. The tool head, in turn, allows for the attachment of both fixed and driven tools. This solution increases the flexibility of the machine by enabling it to be adapted to specific production needs. All this is complemented by advanced CNC control with many useful functions. The HAAS DS30 CNC turning center weighs 7221 kg. Technical specifications of the HAAS DS-30 metal lathe - maximum turning diameter: 457 mm - maximum turning length: 660 mm - swing over bed: 806 mm - swing over cross slide: 527 mm - feed in the X/Z axis: ...

HAAS ST-20Y CNC lathe was built in 2022 in the United States by Haas Automation Inc. The machine has only worked for 119 hours to date and is like brand new. The HAAS ST-20Y is an excellent choice for the modern business. This is because it makes it possible to perform versatile 4-axis machining of the highest quality on any workpiece. All machining processes, i.e. milling, threading and drilling are performed by means of driven tools and a spindle with synchronised C axis. The 12-position BMT turret offers high productivity thanks to the larger contact area between tooling, toolholder and the turret itself. The operator, on the other hand, has at their disposal an advanced HAAS CNC control with a Visual Programming System (VPS), which significantly improves the daily operation of the machine. The VPS uses graphical templates to facilitate the creation of G-codes for even the most  ...

HAAS VF-1 CNC machining center was built in 2015 in the United States by HAAS AUTOMATION, INC. The machine, designed for unit and small batch production, is the ideal choice for any tool workshop. All this is due to the use of a number of modern components with excellent technical parameters, which guarantee high reliability and precise machining. Workpieces weighing a maximum of 1361 kg are machined inside a large, fully illuminated work area by means of a high-speed spindle and tools taken from a 20-position magazine. The machining process is free of vibration or oscillation, thanks to an extremely stable design made from top-quality steel. All this is complemented by an intelligent CNC control with an intuitive interface. The HAAS VF1 milling center weighs 3539 kg. It is also possible to purchase additional tooling shown in the photos (tool holders, vices, TSCHORN 3D tester, measur ...

HAAS SL-20 THE CNC turning center was manufactured in 2008 in the United States by HAAS AUTOMATION, INC. The machine, designed for machining workpieces with a maximum diameter of 262 mm, offers an excellent combination of functionality, productivity and precision. Its extensive equipment includes e.g. a tool probe, an advanced CNC control and a C-axis for machining complex shapes. Over its entire service life, the SL-20 THE CNC lathe has worked for a total of 9586 hours. Technical specifications of the HAAS SL-20 THE lathe - maximum turning diameter: 262 mm - maximum turning length: 508 mm - maximum turning length between centers: 610 mm - maximum spindle rotational speed: 4000 rpm - spindle bore: 52 mm - spindle drive power: 15 kW - lathe chuck diameter: 210 mm - operating hours: 9586 h - power supply of the HAAS SL20 THE machine: 3x 360-480 V; 50/60 Hz Equipment of the H ...

HAAS ST-10 CNC turning center was built in 2015 in the United States by HAAS AUTOMATION, INC. The machine, distinguished by its compact design and increased production cycle efficiency, is an excellent choice for both unit and series production. Workpieces with a maximum diameter of 356 mm are machined inside a large work space by means of a high-speed spindle and precision cutting tools taken from a 12-position turret. All this is complemented by intuitive CNC control with many useful functions. The HAAS ST10 CNC lathe weighs approximately 3600 kg. Technical specifications of the HAAS ST-10 metal lathe - CNC controller: HAAS - maximum turning diameter: 356 mm - maximum turning length: 356 mm - bar diameter: 44 mm - swing over tailstock: 597 mm - swing over cross slide: 413 mm - feed in the X/Z axis: 200/356 mm - rapid traverse in the X,Z axes: 30.5 m/min - maximum spindle ro ...

HAAS ST-15 CNC lathe was built in 2020 in the United States by HAAS AUTOMATION, INC. This highly efficient machine with a compact design is an excellent choice for both unit and series production. Workpieces with a maximum length of 406 mm are machined inside a large workspace by means of a high-speed spindle and precision cutting tools, taken from a 12-position turret. All this is complemented by intelligent CNC control, in which advanced machining programmes are created in just a few steps. The HAAS ST15 CNC turning center weighs 3584 kg. Technical specifications of the HAAS ST-15 metal lathe - CNC controller: HAAS - swing over over bed: 419 mm - bar diameter: 64 mm - maximum turning length: 406 mm - feed in the X/Z axis: 200/406 mm - rapid traverse in the X,Z axis: 30.5 m/min - thrust force in the X,Z axis: 14679 N - maximum spindle rotational speed: 4000 rpm - maximum spi ...

HAAS TM-3PHE CNC vertical machining center was built in 2008 in the United States by the HAAS AUTOMATION, INC. The machine, designed for precision machining of workpieces with a maximum weight of 454 kg, is very easy to operate, even without knowledge of G-codes. The offer also includes equipment, consisting of, among others, a set of tool holders and vices. The TM 3PHE CNC machining center weighs 2622 kg. Technical specifications of the HAAS TM-3PHE CNC milling machine - CNC controller: HAAS - feed in the X/Y/Z axis: 1016/508/406 mm - rapid traverse in the X, Y, Z axis: 10.2 m/min - work table dimensions (L x W): 1467 x 368 mm - maximum workpiece weight: 454 kg - air-cooled spindle - maximum spindle rotational speed: 6000 rpm - spindle drive power: 5.6 kW - maximum spindle torque (at 1200 rpm): 45 Nm - maximum distance between the spindle nose to the work table: 508 mm - m ...

Machine Details Warehouse number 1105-03446 Machine type machining center - Horizontal Haas brand Type HCE 400 P Year of construction 2000 Control type CNC Haas control system Storage location FRANCE Country of origin Japan Delivery time by arrangement Freight base EXW (Incoterms 2000) Price Technical details x-displacement 560 mm y-way 635 mm z-path 560 mm Haas control system Pallet size 400x400 mm Table load 400 kg Spindle motor 22 kW Spindle speed 8100 1/min Rapid speed 36 m/min Pallet changer type 2-fold rotation Table indexing 360000° ° Tool magazine: 30 x BT 40 Total power requirement 54 kVA Machine weight approx. 8 t Space requirement approx. 2.8 x 5.5 m Accessories Conveyor Information Still very precise horizontal center full B AXIS 30X BT 40 TOOL CHANGER CNC HAAS 2 PALLETS 400 X 400 MM

Machine Details Warehouse number 1105-03536 Machine type CNC lathe - inclined bed machine Haas brand Type SL 20 THE Year of construction 2006 Control type CNC Control Haas Storage location HAGUENAU Country of origin Delivery time immediately Freight base from location Technical details Turning diameter 584 mm Turning length 533 mm Control Haas Chuck diameter 210 mm Passage 51 mm Circulation diameter 584 mm Speed 4000 rpm Power 407 Nm Power 15 KW Tool changer 12 COMPARTMENT Gear levels 0 Total power requirement 25 kW Machine weight approx. 5 t Space requirement approx. 3.3 X 2 X 1.9 H m Information CNC HAAS LINING SLIDE 210 MM+ TAILSTOCK SPAENEFOEDERER

Machine Details Stock number 1105-03899 Machine type: CNC lathe - inclined bed machine Make HAAS Type HL 2 Year of construction: 1997 Control type: CNC Control Haas Storage location HAGUENAU FRANCE Country of origin Delivery time: immediately Freight base from location Technical details Turning diameter 250 mm Turning length 520 mm Control Haas Chuck diameter 204 mm Passage 76 mm Swing diameter 420 mm Speed 3400 rpm Power: 407 Nm Power: 15 KW Tool changer 12 SPEED Total power requirement 20 kW Machine weight approx. 4 t Dimensions approx. 3.3 X 2 X 1.9 H m Information CNC HAAS TURRET VDI 12 POSITION LINING DIA 204 MM TAILSTOCK

Key data: 762 , 508 , 508

HAAS UMC-750SS Machining Center TECHNICAL FEATURES: Year: 2019 Number of continuous axes: 5 X-axis stroke: 762 [mm] Y-axis travel: 508 [mm] Z-axis travel: 508 [mm] C-axis angular travel: 360 [°] Table dimensions: Ø630 x 500 [mm] Maximum weight Tabletop Allowance: 300 [Kg] B-axis angular travel: +110 [°] / 350 [°] Pin Attachment: CT 40 Maximum speed Spindle: 15000 [rpm] Spindle power: 22.4 [kW] Number of tool magazine stations: 40 Capacity of the garden tray: 284 [l] Number of hours in operation: 5277 [h] EQUIPMENT INCLUDED: x1 Center-Spindle Watering x1 High Pressure Coolant Pump 21 [bar] x1 RENISHAW Wireless Coin Probe x1 Calibration Sphere x1 RENISHAW Tool Probe x1 HAAS Oil Mist Vacuum x1 HAAS offset crank x1 HENNIG Chip Conveyor Type 101435 Machine visible under tension for testing at our premises, by appointment. Price excl. VAT on request,  ...

HAAS ST 30 SSY Turning-milling centre Year of construction 2015 Control HAAS Machine number 3102813 ONLY approx. 9,950 operating hours (as of 25.03.2026) Equipment: Turning-milling center with C-/Y-axis Travel distances of max. 406 mm x 584 mm Circumferential diameter of 806 mm Y-axis travel ±50.8 mm Vector drive (22.4 kW) A2-6 spindle, 4,500 rpm 10-inch chuck (254 mm) Hybrid turret with 24 tool stations (12 VDI/12 BOT) Higher Torque Driven Tools with C-Axis 15" LCD color screen Memory Lock Key Switch Spindle orientation USB port Synchronized Tapping Automatic tool presetting system Hinged belt chip conveyor Parts catcher Programmable hydraulic tailstock Ethernet interface Visual Quick Code programming system VectorCam Turning Special Haas Edition HAAS Bar Feeder Ø 76 mm Hainbuch Collet Chuck Combi Ax Hoist Size 80 Chip protection for GR80 Vario Quick ...