HABERMANN hpk used machines

1 used service water pump HABERMANN HPK, power 600 cbm/h, impeller diameter 660, H 33, good condition, E -Motor SONDERMEIER GmbH Type KG315 S/7, 110 kW

Water pump Sludge pump / excavator pump Manufacturer : Habermann Model : KB 250 S III The pump is revised and in perfect condition for more information see pictures. Internal number: 601 979

Pump with motor Pump Manufacturer: Habermann Type: RPL 54/7.1 Year of Make: 1988 Engine: Manufacturer: ABB Type: 8995751T06 18.5kW The pump is in good condition. Connection piece for filling the pump is torn off. see pictures for more details.

Dry installed radial split volute horizontal centrifugal pump ksb hpk-ls 050-200

Optical sensor, light sensor, light barrier -Type: OG5029/OGT-HPKG -Price: per piece -Quantity: 11 available -Weight: 0.1 kg

Dry installed radial split volute horizontal centrifugal pump ksb hpk-ls 050-200

Specifications: 2 castors hydraulically adjustable 3 rollers driven Shaft diameter: 120 mm Roll diameter: 390 mm lateral hydr. Controlled arm correctors left and right Bending capacity square: 65 x 65 mm Bending capacity flat steel: 125 x 25 mm Motor power: 15 kW Mobile control panel with digital display Dimensions (length x width x height): approx. 1500 x 1650 x 2050 mm Weight: approx. 5 to The seller is not liable for typographical or data transmission errors. The machine is appropriate for its age in terms of appearance, technology and wear; used machines are sold without any warranty.

Automatic baler Manufacturer: PRESTO / Kampwerth Type: HPK 20/40 Built in 1996 technical data: pressing force: 40 t Specific pressing force. 765 kN/m2 Power: 15 kW Volume performance in idle: 57 m³/h Volume performance based on the bulk weight -35 kg/m3 (Department store) 47 m3/h -60 kg/m3 (mixed goods) 42 m3/h -100 kg/m3 (collective goods) 37 m3/h Weight capacity based on bulk weight -35 kg/m3 (Department store) 1.6 t / h -60 kg/m3 (mixed goods) 2.5 t / h -100 kg/m3 (collective goods) 3.7 t / h bale weight up to 400 kg depending on the material and Bale length electrical connection 400 V, 50 Hz 30 filler opening: 1200 x 700 mm binding: 3 x vertical channel size: 700 x 750 mm (H x W) bale size: 700 x 750 x length in mm machine weight: 6,500 kg optional with presses infeed conveyor

Specifications Maximum pressure: 50 tons Year of Make: 2010 Press force: 6.5 kg/cm² Number of bindings: 4 vertical Channel cross-section: 700 x 1100 x reg mm Dimensions of the tailgate: 1050 x 1250 mm Bale weight: 500 kg Weight: approx. 9 tones Power connection: 400 V/ 22 kW Bale tying: automatic

SAHINLER HPK 65 3-roll bending machine was built in 2005 in Turkey by Şahinler Metal Makina Endüstri A.Ş. The machine, designed for precision machining of tubes and profiles, is an excellent choice for any industrial plant. It enables workpieces to be made in circular, arc or spiral shapes with a fixed radius. The machining process is performed by three hardened rollers, of which the two lower rollers have hydraulic adjustment. These rollers are driven by a reliable, high-powered motor located inside a fully welded housing. Depending on production requirements, the SAHINLER tube and profile bending machine can operate in both vertical and horizontal positions. The total weight of the machine is approximately 1000 kg. Technical specifications of the SAHINLER HPK 65 bending machine - number of rollers: 3 - roller diameter: 180 mm - shaft diameter: 60 mm - working speed: 5 m/min  ...

Channel baler Presto HPK 50 HS, built in 2014 Manufacturer: Presto Type: HPK 50 HS Year of Make: 2014 Drive: 30 KW Press force: 50 t Hours: 7145 Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Materials: paper, cardboard, foil, PET bottles Note: Knives and counter-blades as well as all sliding plastics have been replaced. The press is in good condition and has been inspected and tested. You can find a video on our website or YouTube channel. The user manual and CE declaration are available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability f ...

In the pipeline Presto HPK 50 HS baler, built in 2012, with perforator and riser belt (sliding belt conveyor belt) Manufacturer: Presto Type: HPK 50 HS Year of Make: 2012 Drive: 30 KW Press force: 50 t Filling opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 19 s Binding: 4-fold throughput at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power 2 x 4 kW / 400 V Flow rate: approx. 220 m³/h Clear filling opening: 1380 x 1200 mm Materials: paper, cardboard, foil, PET bottles Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to c ...

Hello, We hereby offer you a used baler from the manufacturer Presto GmbH & Co. KG, type HPK 50 B. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer: Presto GmbH & Co. KG Type HPK 50 B Year of manufacture 2005 Hours 15606 Hours Press force main press 50 t Drive power 30 kW Total connected load 31.5 kW Rated current 64 A Throughput under operating conditions at a bulk density of 60 kg/cbm approx. 6.7 t/hour Machine weight press 12.5 t Note: The machine has been repaired in our workshop (main control valve on the hydraulic block replaced) and tested on the fly, in manual and automatic mode. The machine documentation is available in German. A tour of the press is possible by appointment in our workshop. We would be happy if  ...

Available from June 2026 Presto HPK 50 BS baler, built in 2011, with vorbulator and optional chain belt conveyor Horstmann Manufacturer: Presto Type: HPK 50 BS Year of Make: 2011 Drive: 30 KW Press force: 50 t Filling opening: 1600 x 1050 mm (LxW) Channel cross-section: 700 x 1100 mm Filling volume, max. 1.23 m³ Cycle time: 19 s Binding: 4-fold throughput at 35 kg/cbm: 6 t/h 60 kg/cbm: 9.6 t/h 100 kg/cbm: 13.9 t/h Bale weight: up to 500 kg Machine dimensions: 8500 x 1700 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Data Chain Belt Conveyor Manufacturer: Horstmann Type: PK 1100/11 Year of Make: 2011 Belt width 1100 mm Speed: approx. 0.2 m/s (max. 0.3 m/s) Feed length approx. 3000 mm Climbing part approx. 5000 mm Gooseneck approx. 1000 mm The press is still in use and can be viewed under operating conditions. It will be available from the beginni ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 51900 € : 980.91 € : 120 mm : 390 mm : 3 : 15 kW : 2/7,5 m/min : 125x25 mm / 1.200 mm, 30x : 200x50 mm / 1.000 mm, 100 : 65x65 mm / 750 mm, 20x20 : Ø 80 mm / 850 mm, Ø 20 mm : Ø 160x4 mm / 2.800 mm, Ø : 120x40x4 mm / 1.800 mm, 3 : 90x90x5 mm / 1.800 mm, 30 : 120x120x12 mm / 1.200 mm, : 100x100x10 mm / 1.200 mm, : UPN 220 / 1.000 mm, UPN 1 : UPN 220 / 1.200 mm, UPN 1 : IPN 220 / 1.000 mm, IPN 8 : 2000 mm : 1650 mm : 1900 mm : 4450 kg 3 rolls driven (hydromotor and planetary gearbox) shafts made of special steel,hardened and ground hydraulic adjustment of the 2 lower rolls hardened universal rolls lateral rolls hydraulic adjustable in 3 axes horizontal and vertical operation mobile operating panel 2 working speeds digital read out (3 axes) machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE M ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 10800 € : 207.36 € : 35 mm : 137 mm : 137 mm : 3 : 1.1 kW : 7 m/min : 35x8 mm / 300 mm : 50x12 mm / 400 mm : 18x18 mm / 250 mm : Ø 22 mm / 200 mm : Ø 40x1,5 mm / 500 mm : 30x15x2,5 mm / 500 mm : 25x25x2 mm / 450 mm : 35x35x5 mm / 400 mm : 30x30x4 mm / 550 mm : 1050 mm : 500 mm : 1250 mm : 350 kg 3 mech. driven rolls (brake motor) hardened and ground shafts lower rolls hydraulic adjustable horizontal and vertical operation standard set of rolls foot pedal forfor- and backward drive 2 digital readouts control panel machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 15900 € : 305.28 € : 50 - 60 mm : 180 mm : 180 mm : 180 mm : 3 : 3.75 kW : 6 m/min : 60x10 mm / 500 mm, 20x5 m : 80x20 mm / 500 mm, 50x5 m : 32x32 mm / 400 mm, 12x12 : Ø 35 mm / 350 mm, Ø 10 mm : Ø 60x2 mm / 600 mm, Ø 15 : 50x25x3 mm / 450 mm, 20x1 : 45x3 mm / 600 mm, 20x2 mm : 60x60x6 mm / 650 mm, 30x3 : 50x50x5 mm / 550 mm, 30x3 : UPN 80 / 600 mm, UPN30 / : UPN 65 / 600 mm, UPN 30 / : IPN 80 / 600 mm : 1200 mm : 850 mm : 1200 mm : 955 kg 3 mech. driven rolls (brake motor) hardened shafts lower rolls hydraulic adjustablehardened universal rolls lateral rolls adjustable in 1 axis horizontal and vertical operation digital read out for the position of the lower rolls machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech ...

Spiral casing circulation pump without motor, water pump, centrifugal pump, chemical pump KSB HPK-LS 080-200 year 2011 Q: 56.5 m3/h H: 11.9 m n: 1440 rpm New ! Dimensions: 640 x 380 x 450 mm