42 HACO used machine for sale

Offer 25496 Hydr.- Univ. - Two-station – sheet metal notching machine + hole punch Technical data: Station 1. Notching device - Cutting length up to 220 mm - Cutting thickness - steel with 400N/mm² strength 6 mm - Infinitely variable cutting angle adjustment by handwheel 30 - 140 ° - Pneumatic clamping - Locking stops left + right - Table support surface 1020 x 940 mm - With T-slots and depth stops - Table height approx. 920 mm Station 2. Kanteinrichtung oder Lochstanzeinrichtung - Max. pressure capacity 200 kN - Working speed 0 to 10 mm/sec - Bending device up to 800 mm - Hole punching up to 50 in 3 mm - Depth stops - Drive 400 V / 4 kW - E – Footswitch - Space requirement approx. W 1000 x H 1350 x D 1110 mm - Weight approx. 1100 kg

Offer 25493 Specifications: - Cutting length 3050 mm - Cutting thickness at 400 N/mm², strength 13 mm - Cutting thickness at 400 N/mm², strength up to 1000 mm, length 15 mm - Cutting angle 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min -Mot. Back gauge up to 1000 mm - Rear area protection with light barrier - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet thickness in mm -Auto. Cutting angle adjustment according to sheet thickness - Cutting length limitation -Auto. Positioning of the backgauge (8 programs – 80 sets) with - Digital display and autom. Backgauge retraction - Possibility of mot. Adjustment of the backgauge by 2 push buttons - Drive 400 V / 22 kW - E - Footswitch - Space requirement without support arms approx. W 4200 x H 2250 x D 2200 mm - Weight ...

Offer 25500 Specifications: - Cutting length 3050 mm - Cutting thickness at 400 N/mm², strength 13 mm - Cutting thickness at 400 N/mm², strength up to 1000 mm, length 15 mm - Cutting angle 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min -Mot. Back gauge up to 1000 mm - Rear area protection with light barrier - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet thickness in mm -Auto. Cutting angle adjustment according to sheet thickness - Cutting length limitation -Auto. Positioning of the backgauge (8 programs – 80 sets) with - Digital display and autom. Backgauge retraction - Possibility of mot. Adjustment of the backgauge by 2 push buttons - Drive 400 V / 22 kW - E - Footswitch - Space requirement without support arms approx. W 4200 x H 2250 x D 2200 mm - Weight ...

Inv. Num. : 8497 Type: HSLX 3008 Producer: HACO Created: 2016 Parameters: Maximum cutting length: 3000 mm Maximum cutting thickness: 8 mm Back gauge: 1000 mm Equipment: Set of knives Truck with rear handling

Inv. Num. : 8739 Type: TS 3006 Producer: HACO Created: 2004 Parameters: Maximum cutting length: 3000 mm Maximum cutting thickness: 6 mm

Key data: 40 t, 2000 mm

Inv. Num. : 8524 Type: PPM 20040 Producer: HACO Created: 2015 Parameters: Compressive force: 40 t Maximum bending length: 2000 mm

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3200 mm Maximum cutting capacity steel St40: 6.0 mm Maximum cutting capacity stainless steel: 3.0 mm Mot. Adjustable rip fence: 650 mm Working height: 800 mm Dimensions (length x width x height): approx. 3850 x 1650 x 1750 mm Weight: approx. 6,3 tons

Specifications: Retrofit in 2024 by HACO Maximum cutting width: 3100 mm Maximum cutting capacity steel: 16.0 mm Maximum cutting capacity stainless steel: 12.0 mm CNC control: SP 9 (new) Mot. Adjustable rip fence: 1000 mm Cutting gap adjustment Working height: 1050 mm new knives CE mark Motor power: 30 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2350 mm Weight: approx. 15,5 tons

Specifications: Maximum cutting width: 2550 mm Maximum cutting capacity steel 400 N/mm2: 13.0 mm Adjustable rip fence: 1000 mm Adjustable cutting gap adjustment Adjustable cutting angle adjustment Working height: 940 mm Dimensions (length x width x height): approx. 3700 x 2800 x 1950 mm Weight: approx. 9,6 tons

Key data: 4050 mm, 10 mm, 1000 mm

brand new, with control SC100T Specifications: max. cutting length 4050 mm max. sheet thickness for ST 45 10 mm Cutting angle 0.5 - 3° degrees Cutting gap adjustment 0.05 - 1 mm Hold-down 23 Back gauge area 1000 mm Stroke rate 7 - 11 strokes Length of the angle stop 1000 mm Weight approx. 13,000 kg Standard equipment: - SC 100T control - Cutting length limitation - Motorized back gauge 1,000 mm - Electronic cutting gap adjustment - Cutting line lighting with wire - Electro-hydraulic cutting angle adjustment via 2 push buttons or CNC - Angle stop 1,000 mm with scale, T-slot and fold-down cam - Scissor table with square supports and roller support - Mobile foot pedal for easy and safe handling - Hydraulic and mechanical overload protection - Finger guard made of round steels with recessed grip - Light barriers and protective fences - Machine according to CE  ...

Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Offer 22564 Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between uprights 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg - With: - Two-hand control panel with foot switch

HACO ERM 30175 CNC press brake built in Belgium in 1999, performs precise bending of workpieces with a maximum length of 3100 mm. The robust, stable construction of the machine, together with a high press force of up to 175 tonnes, guarantee excellent machining results. The press is equipped with operator conveniences such as a pedal for foot control and a HACO bc40 GRAPHIC CNC control located on the arm. The total weight of the machine is 10 tonnes. Technical data of the HACO ERM 30175 press - CNC controller: HACO bc40 GRAPHIC - maximum press force: 175 t - maximum workpiece length: 3100 mm - bending speed: 8 mm/s - approach speed: 100 mm/s - return speed: 80 mm/s - distance between carcase walls: 2600 mm - reach: 300 mm - working stroke: 200 mm - safety distance: 300 mm - pedal for foot control - main motor power: 15 kW - waiting time: 75 ms - maximum pressure: 255 bar ...

HACO OMATIC 130 DTRH punching machine was built in 2014 in Belgium. The machine is used to punch various size shapes and holes in workpieces weighing up to 150 kg and having a maximum thickness of 6.5, a width of 1500 mm and a length of 4000 mm. The machine operator manually operates the punching machine by loading the workpiece on the working table and changing the punching tools using a special device offered in the price of the machine. The punching process takes place on the brush table of the punching machine, which significantly reduces noise levels and adequately protects the sheet metal surfaces against various types of scratches and nicks. Depending on the choiceed mode, the machine performs between 1,000 and 1,500 punches per minute with a press force of 30 tonnes. The equipment includes amongst others a TPC 69C Graphics CNC controller for graphical programming of the desire ...

Er worden 3 rollen aangedreven - directe transmissie geharde rollen digitale uitlezing conische buiging permanente smering Planetaire beweging: minimaliseert contact en wrijving tussen de onderdelen, waardoor de buigprestaties verbeteren. gt; Directe overbrenging: versnellingsbakken gekoppeld aan de rollen, lagers en Hydraulische motoren om het energieverbruik te verminderen en de sleepkracht te verbeteren. gt; Permanente smering: alle onderdelen zijn voorgesmeerd en levenslang afgedicht. gt; Rolbuiging: bi-conische vormgeving om ton- of spoeleffect te voorkomen gt; Bewegingscontrole en rolparallellisme gt; Conisch buigsysteem Number of rolls: 3 rolls Roll capacity cold: 3100 x 20 mm Roll dia upside: 340 mm Dia under roll - side rolls: 320 mm Power needed: 11 kW Weight: 9 ton

This 6-axis HACO SRM30150 was manufactured in 2019. It features an 800 mm travel for the backgauge X-axis and includes manual quick clamping for upper tools. The machine is equipped with two support arms on linear guides and offers options for speed control and premium crowning. If you are looking to get high-quality bending capabilities, consider the HACO SRM30150 press brake we have for sale. Contact us for further details.

Hydraulic shearing machine manufactured in 2018. This HACO TSX3006 MOT features a maximum cutting length of 3050 mm and a cutting thickness capacity of 6 mm for mild steel. It includes automatic blade gap and rake angle adjustments, along with a backgauge adjustment range of 1000 mm. If you are looking to get high-quality shearing capabilities, consider the HACO TSX3006 MOT machine we have for sale. Contact us for further details.

: 3050 mm : 06,0 mm : - : 0,5-3,0 ° : 1000 mm table height: 770 mm work height max.: 0 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press brake manufactured in 2002. This HACO PPM 30135 b features a pressing force of 135 tons and a bending length of 3100 mm. It is equipped with a power of 15 kW, ensuring efficient operation. If you are looking to get high-quality bending capabilities, consider the HACO PPM 30135 b machine we have for sale. Contact us for further details.

pressure: 40.0 t chamfer lenght: 1600 mm distance between columns: 1100 mm stroke of upper beam: 100 mm throat: 195 mm working feed: 10.0 mm/sec return speed: 70.0 mm/sec : 180 bar work height max.: 840 mm table width: 110 mm dayligth: 295 mm Control: ATS 585 total power requirement: 5.5 kW weight: 2500 kg range L-W-H: 2100 x 1200 x 1800 mm Furnishing: - NC controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control ATS 560 Positioning of the backgauge (X axis) Depth setting positioning (Y1+Y2 axis) Possibility of programming different programs Storage capacity max. 200 programs - max. 400 sentences Pivoting control panel, left front - electric back gauge (X axis) with 2 stop fingers, manually adjustable (R+Z axis) - System A tool holder - with cambered upper wedge - Split insert/bending tools - side protection grids - rear protection - free-moving double foot s ...

Haco PC15

sheet width: 3050 mm plate thickness: 6,0 mm distance between columns: 3000 mm cutting angle: 0,5 - 3 ° no. of strokes: 9 / 14 Hub/min down holder: 18 total power requirement: 10 kW weight of the machine ca.: 4800 kg dimensions of the machine ca.: 3750 x 1600 x 1650 mm Features: - Hydraulic / slide-guided sheet metal guillotine shears - Electric backgauge 10-750 mm - Electric cutting angle adjustment - Manual cutting gap adjustment - 1x side stop - Front finger guard - Foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Control unit, control panel, control panel, control unit, keyboard, screen, control -Manufacturer: HACO, control panel with foot switch from press brake type PPES 30135 -Footswitch: Amber, with 2 pedals -Connections: see photos -Dimensions: 800/740/H1095 mm -Weight: 25 kg

Crowning for press brake, bending bench, die holder with displacement device -Manufacturer: HACO, die holder with crowning for press brake type PPES 30135 -Matrix length total: 3050 mm -Individual components: see photos -Transport dimensions: 3570/260/H405 mm -Weight 374 kg

Hydraulic control block for hydraulic pump, hydraulic unit, control block, hydraulic control block, control unit, control valve, servo valve -Manufacturer: HACO, hydraulic control block from press brake type PPES 30135 -Control valve: hy hydraulic ring WLL43G06P012KB4 / WEF42A06C1 -Lifting magnet: Magnet-Schulz G RF Y 045 F20 E11 -Individual components: Type/number see photos -Dimensions: 540/380/H400 mm -Total weight: 23 kg

CNC control, card slot, control cards, plug-in cards, circuit boards, control -Control card: from press brake HACO type PPES 30135 -Type: HACE 032 -Dimensions: 95/70/H50 mm -Weight: 0.1 kg

pressure: 200 t chamfer lenght: 3100 mm distance between columns: 2550 mm stroke of upper beam: 200 mm throat: 300 mm dayligth: 440 mm working feed: 9.0 mm/sec return speed: 80.0 mm/sec : 265 bar Control: konv. work height max.: 965 mm total power requirement: 15.0 kW weight: 10500 kg range L-W-H: 3360 x 1750 x 2800 mm Equipment: - simple / conventional electro-hydraulic press brake - pivoting operation, front left - electric, infinitely variable depth adjustment (Y1 Y2 axis) Torsion shaft for parallelism - Electro-motorized backgauge (X axis) with handwheel for fine adjustment on recirculating ball screws 2x manually adjustable stop fingers - manual (jog mode) and automatic cycle selector switch - manual table crowning - split set of roe foot upper tools ... H = 210 mm - 1x as good as new universal V-die block, reversible with anti-corrosion grease V openings in mm : 12/35/25 50 1 ...

CNC punching machine Type: OMATIC 130 DTRH Manufacturer: Haco Year: 2014 Control: TPC 69C Graphics Pressing force: 30 t Max. sheet size: 4000 × 1500 mm Max. sheet thickness: 6.5 mm (steel) Positioning accuracy: ±0.05 mm Features and equipment: CNC turret punch Brush work table - sheet metal surface protection Hydraulic clamps High punching speed, also suitable for nibbling Stable construction, reliable industrial operation The machine comes with an extensive set of die-cutting tools in excellent condition Tools intended for black sheet in thicknesses of approx. 0.8 – 3 mm Machine in good condition, under power Find more here - / Contact us at -

table length: 3048 mm table width: 1524 mm burner heads: 1 stroke: 270 mm speed: 100 m/min dimensions: 8900 x 2260 x 2220 mm weight of the machine ca.: 7.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Haco Rack BC 40