HAENDLE wf used machines

Roll gap from 0.6 mm. New roller shells. Power at gap of 0.8 mm is 40t

Rolling mill 800x800 mm, built in 1988 Roller casing table: 70 mm

Press company Haendle PZG 56D/50

Vacuum Press Haendle type PZG 56A/40

Haendle box feeder, belt width 1250 mm, length 6 m

Haendle roller gear 2,000 mm x 800 mm, with new gearbox and runner rings, after overhaul. Throughput capacity 100 t/h

* General * SKU101Y726 * LocationBarneveld * MakeHändle * TypeEDR 21-A * No.PZ-3445 * Main Features * Motor22 KW * Length1400 mm * Inlet diameter210 mm * Specified Features - Double screw extruder * Screw press(1x) * Double screwcheck * Screw diameter210mm * Screw length1400mm * Motor22,0 kW, 400/690 V * Speed± 43 Rpm * Inletdia. 245mm * With jacket(max. 6 bar) * With jacketcheck * Double screw extruders * MaterialStainless steel * General * Year of construction2000 * Floorspace3,6x0,9 M * Total height1,3 M * Weight2950 KG * Extra Specifications- Sieve plate housing is missing - Max. pressure 20 barDiscountDouble screw extrudersHaendleDiscountExtruders > Double screw extrudersBrand > Haendle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine ...

* General * SKU041H136 * LocationBarneveld * MakeHändle * TypeEDR 21-A * No.PZ-3444 * Main Features * Motor22 KW * Length1400 mm * Inlet diameter210 mm * Specified Features - Double screw extruder * Screw press(1x) * Double screwcheck * Screw diameter210mm * Screw length1400mm * Shaft diameter100mm * Pitch250/140mm * Motor22,0 KW, 400/690 Volt * Speed± 43 Rpm * Inletdia. 245mm * With jacket(max. 6 bar) * With jacketcheck * Double screw extruders * MaterialStainless steel * General * Year of construction2000 * Floorspace3,6x0,9 M * Total height1,3 M * Weight2950 KG * Extra Specifications- Max. pressure 20 barDiscountDouble screw extrudersHaendleDiscountExtruders > Double screw extrudersBrand > Haendle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect th ...

Haendle Extruder type PZG60b/50 with doubleshaft mixer MDVG920a, 29 cbm/h, 30 bar

Screen round feeder Haendle type BRSH19a

Kollergang Fa. Haendle Type HMS 2080b

Collection plate diameter 1900 mm Volume throughput 12 cbm/h

1500х800 mm, 8 m AA

PZG60b56 extruder with МDVG920b twin-shaft mixer

Bellows for Mikron Fraesmaschine WF3 (WF3SA)Z-Axis

Technical data: Fixed angular table: Fixed angular table clamping area: 800 x 400 mm Max table load: 200 kg Working spindle: Tool holder horizontally and vertically: ISO 40 Power of the main drive motor / 100% ED: 2.2 kW Vertical milling head: Speed range, tiered: (12) 50 - 2000 rpm Drill pinole, stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/man.: 385/400 mm Y-axis automatic/man.: 185/200 mm Z-axis automatic/man.: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: infinitely adjustable Rapid response: 1000 mm/min Characteristics: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle run max. 0.005 mm, incl. test protocol according to DIN 8615 (rolling bearing SKF®/NSK®) - Vertical milling head can be swivelled out for horizontal milling  ...

Water filter station, water treatment with diesel engine and compressor in container used manufacturer: Type: WFS 3/76 Year of construction: 1977 The operation can be done with third-party network or own network via: Diesel engine FIMAG Finsterwalde Type 6-1521/104-0 10 kVA 14.8 A 390 V 50 Hz follow Total dimensions: approx. 6 x 2.4 x 2.4 m Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Table dimensions: . mm Motor output: 9 kW Spindle diameter: . mm reus: U/min Weight: kg Year: 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The cutting waste falls onto the infeed conveyor belt (GFR), which is installed below the guillotine cutter. From here, the waste is transported onto the adjacent upward-moving conveyor belt (WFL) and disposed off in a paper container. The belt can be positioned to the right, to the left or in line with the infeed conveyor.

WE OFFER VERY NICE CONDITION - MIKRON WF3 S technical details: X-travel longitudinal 500 mm Y-travel cross 500 mm Z-travel vertical 380 mm spindle speed 12-steps 50-2240 UpM /rpm feed 1-750 mm/min spindle taper SK40 table size 800x445 mm drive capacity 7 kW weight 1650 kg

ORDER NO. 7032 TECHNICAL SPECIFICATIONS - loading hopper inlet 1050x610mm - outlet for shredded wood fi 160mm - rotor working width 580mm - main engine 18,5kW - pump motor 0,75kW - number of knives 14pcs - knife size 30x30mm - sieve 15mm x 20mm - pressure drawer - electric autorewers - dimensions length / width / height 2000x1130x1530mm - weight 970kg ADVANTAGES – German production – autorewers – pressure drawer – very good condition – used chipper Net price: 47900 PLN Net price: 10764 EUR depending on the price 4.45 EUR (Prices may fluctuate with higher fluctuations)

SCHARMANN HEAVYCUT 2 WFT 150 CNC Floor type Boring Mill Year 1978 Spindle Diameter: 5.9" (150mm) Milling Spindle Diameter: 11.02 (280mm) Spindle Taper: CAT 50 Ram Cross Section: 11.81" x 11.81" (300x300mm) Vertical Head Travel, Y-Axis: 137.79" (3500mm) Column Travel, X-Axis: 712.59" (18000mm) Quill Travel, Z-Axis: 23.43 (595mm) Ram Travel, W-Axis: 27.6" (700mm) Z & W Axis, Combined: 51.03" (1296mm) Spindle Speeds: 5.5-1000 RPM Spindle Feed Range: 0.003-240 IPM Rapid Traverse: 396 IPM Spindle Motor: 70 HP/ 105 HP EQUIPPED WITH: Heidenhain TNC 407 CNC Controls Ram and Spindle Travel Sliding Way Covers On X-Axis Bed Right Angle Head With 1 Degree Manual Indexing Hardened Ways Re-pained recently

Key data: 420 mm, 250 mm, 350 mm

with Heidenhain TNC 114 digital display Tool holder ISO 40/M16 Travel X/Y/Z 420 x 250 x 350 m 12 spindle speeds from 50 - 2240 Weight approx. 900 kg Central lubrication Bellows NEW! Accuracy in: X-axis 0.005/300 mm Y-axis 0.006/250 mm Z-axis 0.01/300 mm Spindle concentricity 0.003 mm Angular accuracy 0.01/250 Spindle clearance X 0.12, Y 0.04, Spindle noise: very good Very good overall condition!

CATALOG NO. 7176 TECHNICAL DATA - loading hopper inlet 1050x600mm - outlet for chipped wood, diameter 160 mm - rotor working width 590mm - main engine 18.5kW - pump motor 0.75kW - number of knives 14 pcs - knife dimensions 30x30mm - 10x12mm sieve - pressure drawer - electric autoreverse - dimensions length/width/height 1900x1200x1530mm - weight 990 kg ADVANTAGES – autoreverse – German production – unpainted – like WEIMA WL4 – pressure drawer - very good condition – used chipper The prices given are net prices. Net price given for international transactions, EX, customers from the EU with an EU Tax Identification Number. Current offer on our website. Net price: 48900 PLN Net price: 10867 EUR depending on the price 4.50 EUR Net price: 12868 USD depending on the price of 3.80 USD (Prices may vary with higher fluctuations) Planers and Moulde ...

X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table dimensions: 700 x 425 mm Spindle Exception: SK 40 Spindle speeds: 1 - 4000 rpm. Spindle stroke: 60 mm Equipped with: - ISO tool holders - Coolant system -Operating instructions Country of origin: Germany Motor power: 5 kW Machine LxWxH: 200 x 200 x 200 cm Machine weight: 2000 kg