HEBROCK top used machines

Key data: 1 mm, 50 mm

Hebrock TOP 2000 edge banding machine – overhauled, serviced & ready for immediate use – others just push through – we check! For sale is a Hebrock TOP 2000, built in 2003, in well-maintained and technically revised condition. Radius / chamfer pneumatically adjustable. Heated inlet ruler. The machine has been extensively overhauled by us: • Most of the pneumatic hoses renewed • Replaced several pneumatic cylinders → Typical wear parts have already been dealt with and are unlikely to be an issue in the next few years. Safety switch also renewed. In addition, the machine comes from a company where specialist fitters were regularly on site for maintenance – recognisable by the existing maintenance stickers. → This speaks for a continuously maintained technical condition. Technical data: • Voltage: 400V 50 Hz • Power consumption: 6.9 kW • Current  ...

This Hebrock TOP 2000 PLUS was manufactured in 2015. A used edge banding machine, it features a gluing unit, cutting unit, and combination milling unit. It handles edge material thickness from 0.5 to 3 mm and can manage workpieces from 10 mm to 45 mm in thickness. Ideal for precise edge finishing tasks. Contact us for more information about this machine.

Type AKV 88 F Without glue tank Max. edge thickness 3 mm Max workpiece height 50 mm Feed speed : 0-7 m/min (0,25kW) Power consumption 3,2 kW Work table height 890 mm Made in Germany 1996 y. Transport dimensions 1360x680x1220 mm Weight 150 kg

Hebrock Edge gluing machine Edge glue Edge milling machine heating Capping

Manufacturer: Hebrock, Type: HFF 08, Year: 1993, Min.-max. workpiece height in mm: 15 - 50, Edgeband thickness max mm: 3, Machine lenght mm: 800 x 1400 x 1400, Wight approx. kg: 350, Year :1993

Manufacturer: Hebrock, Type: AKV 88 F, Year: 1997, Control: hand, Glue application: no, Edgeband thickness max mm: 3,0, Edgeband height max mm: 50, Edgeband thickness max mm: 3,0, Glue system granulate/cartridge: Wärmedusche, Feeding speed min-max m/min: 0-7, Mitre stations: yes, FREE TEXT: Elektronische Eintellung der Kantenlänge, Year :1997

Manufacturer: Hebrock, Type: TF 03, Year: 1998, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Kopierfunktion single sided: yes, Tracing by roller: yes, Arbeitstakt automatisch: yes, Engine milling kW: 0.5, Machine lenght mm: 1000, Compressed air bar: 6, Wight approx. kg: 200, mit Schwabbelstation, Year :1998

A right-sided Hebrock edge banding machine is available. Workpiece thickness range: 10mm-50mm, min. workpiece width: 70mm, min. workpiece length: 250mm, edge thickness (roll material): 0.5mm-5mm, max. edge height: 55mm, feed rate: 10m/min. Machine dimensions X/Y/Z: approx. 3000mm/1500mm/1300mm, weight: approx. 700kg. On-site inspection is possible.

Hebrock edge banding machine K36 with extraction connection Technical data: • Version for R1 (1 mm) • PLC control (incl. touchscreen) • Hot melt adhesive specification on the workpiece for edge material up to 3 mm joining milling machine (incl. DIA tool) • Up to 3 mm milling depth • Maintenance-free coated glue basin with alternating basin pre-installation • Incl. adhesive run-out device • HF cross-cut saw station (approx. 16,000 rpm) • HF milling station (approx. 16,000 rpm) • With pneumatic milling adjustment and interchangeable insert milling cutter (combined version) • Corner round milling machine • Radius scraper blade • Wing scraper blade (incl. pneum. Excavation device) • Cleaning station • Robust chain drive • Ball-bearing double roller top pressure • Unit viewing window from the rear and operating side of the machine • S ...

Hebrock edge banding machine K36 with extraction connection Technical data: • Version for R1 (1 mm) • PLC control (incl. touchscreen) • Hot melt adhesive specification on the workpiece for edge material up to 3 mm joining milling machine (incl. DIA tool) • Up to 3 mm milling depth • Maintenance-free coated glue basin with alternating basin pre-installation • Incl. adhesive run-out device • HF cross-cut saw station (approx. 16,000 rpm) • HF milling station (approx. 16,000 rpm) • With pneumatic milling adjustment and interchangeable insert milling cutter (combined version) • Corner round milling machine • Radius scraper blade • Wing scraper blade (incl. pneum. Excavation device) • Cleaning station • Robust chain drive • Ball-bearing double roller top pressure • Unit viewing window from the rear and operating side of the machine • S ...

Hebrock edge banding machine K36 with extraction connection Technical data: • Version for R1 (1 mm) • PLC control (incl. touchscreen) • Hot melt adhesive specification on the workpiece for edge material up to 3 mm joining milling machine (incl. DIA tool) • Up to 3 mm milling depth • Maintenance-free coated glue basin with alternating basin pre-installation • Incl. adhesive run-out device • HF cross-cut saw station (approx. 16,000 rpm) • HF milling station (approx. 16,000 rpm) • With pneumatic milling adjustment and interchangeable insert milling cutter (combined version) • Corner round milling machine • Radius scraper blade • Wing scraper blade (incl. pneum. Excavation device) • Cleaning station • Robust chain drive • Ball-bearing double roller top pressure • Unit viewing window from the rear and operating side of the machine • S ...

Key data: 1 mm, 40 mm

Hebrock Euro 2000 edge banding machine – ready for immediate use Our affordable alternative. For sale is a robust and proven Hebrock Euro 2000 edge banding machine from 1993. The machine has been overhauled and is ready for immediate use. Some components have already been repaired: • Several hoses renewed • Replaced several cylinders Despite its age, the machine delivers a clean and reliable work result – typical of Hebrock's solid construction. Technical data: • Voltage: 400V 50 Hz • Connected load: 11.5 kW • Pneumatic roller capping up to max. 3 mm edge thickness • HF cross-cut saw up to 8mm edge thickness • HF combi milling station • Double belt feed • Foldable side outriggers Ideal for smaller workshops or ambitious hobby users who are looking for a functioning edge banding machine. Feel free to take a look at our other offers! m ...

Hebrock Euro 2000 edge banding machine – ready for immediate use Our affordable alternative. For sale is a robust and proven Hebrock Euro 2000 edge banding machine from 1993. The machine has been overhauled and is ready for immediate use. Some components have already been repaired: • Several hoses renewed • Replaced several cylinders Despite its age, the machine delivers a clean and reliable work result – typical of Hebrock's solid construction. Technical data: • Voltage: 400V 50 Hz • Connected load: 11.5 kW • Pneumatic roller capping up to max. 3 mm edge thickness • HF cross-cut saw up to 8mm edge thickness • HF combi milling station • Double belt feed • Foldable side outriggers Ideal for smaller workshops or ambitious hobby users who are looking for a functioning edge banding machine. Feel free to take a look at our other offers! m ...

Hebrock K34 Edge thickness up to 8mm PLC Screen Control with 15" Touch Screen Pre-milling unit for attaching in front of the gluing part (3mm) Glue basin with alternating basin and adhesive spout device Edge height max. 60 mm Cross-cut unit Milling unit flush/radii/chamfer milling Corner Round Unit Radi/Chamfers Multiradius scraper blade /R1/R2) Nesting Wing Scraper Release agent spraying device Year of Build 2023, 52 Hours Machine is MINT in TOP CONDITION From joinery liquidation / retirement from the carpentry workshop

Edge banding machine Type: F 5 Manufacturer: Hebrock Year: 2024 Counter: 18 km pre-milling glue unit drip unit upper and lower milling corner cutter profile and surface cidlina polishing unit touch control Machine in very good condition,fully functional, under power Find more here - .ucymachines/ Contact us at - sales@ucymachines

The high-load timber-beam formwork with a system grid The pre-assembled standard elements of Doka timber-beam formwork FF20 combine the advantages of timber-beam formwork with the grid-related advantages of a framed formwork system. Their very high load-bearing capacity offers a new degree of freedom when it comes to fulfilling architectural specifications in a cost-effective way. FF20 is suitable for fair-faced concrete categories SB1 to SB4, as defined in the DBV Code of Practice. High pouring rates made possible by extra-strong components Up to a pour-height of 3.60 m, only two 20.0 form-ties are needed, thanks to the 80 percent higher load capacity of the I tec 20 composite formwork beam compared to conventional H20 timber formwork beams the stiff FF20 tec walings WU14, with their welded-on plates Maximised utilisation of equipment and ease of handling Lowers commiss ...

Marel concept 500 labelling machine, - top and bottom labelling machine

Tetra Top Cleaning unit (TTCU) previously used on Tetra Pak TT/3 2000 carton filler for Tetra Top 250 Mini Eifel C38 cartons. The external Tetra Top® Cleaning Unit offers excellent cleaning and disinfection of your hygiene chamber. You can clean and disinfect both sides simultaneously or choose to clean and disinfect one side at a time. One unit is able to clean up to two Tetra Pak® TT/3 filling machines. 3x separate vats for P3-oxonia active S, Mip CA and P3-horolith V. Integrated centrifugal pump (11 kW). Control panel with PowerFlex40 frequency converter and ABB RVG200 operator panel. 6x valves with pneumatic actuator (Air Torque AL-79)., Type of Machine: Cleaning unit, Development step: -0200, Production hours: 1.166 hours, Drawing Spec.: 2866825-0200, Dimensions: 145 X 125 X 295 cm, Weight: 850 kg

CNC Lathe Tongtai Topper TNL - 100 TL / Fanuc OT -CE marking -Fanuc OT control -Max. turning diameter 388mm -Max. turning length 580mm -Rod passage 51mm -Hollow spindle diameter 62mm -Speed 45 - 4500 rpm -Turret / 12 stations -Tool -Eye / Tool Measurement -Tool shank 25mm - Holder diameter 32mm - Axis movement X/Z 200 & 600mm -Rapid traverse X/Z axis 20 & 24 m/min -Spindle motor 15 KW -Tailstock -Footswitch -Machine feet -Chip conveyor -Documentation Dimensions: LxWxH 2.6x1.8x2 meters / Weight 4700Kg

Used Futura top labeling machine 15000 BPHTechnical Specifications & Performance DataThis P.E. Labellers FUTURA TOP carousel labeling machine is configured for mixed cold glue and hot melt operations, ideal for high-quality label application within a used bottling line or as a standalone unit in industrial packaging environments. Engineered for reliable beverage production, it offers robust performance with precise control and flexible container handling.Manufacturer: P.E. LabellersModel: FUTURA TOP 20T/1420/4SProduction speed: up to 15,000 bphCarousel configuration: 20 plates (Counterclockwise rotation)Labeling stations: 4 total (3 cold glue, 1 hot glue)Seal capability: 1 dedicated station for tax stamp/seal with cold glueMax lift (bottle height adjustment): 338 mmBottle formats: Compatible with 0.5L, 1.0L, 0.75L, 1.5LContainer types: PET and GlassBottle dimensions handled: PET 0.5L Ø7 ...

Built: 2003 Location: Germany Brand: TetraTop Model: TetraTop 170V Availability: instantly Technical details: Volume (ml): 1,000 ml, 750 ml, 500 ml Tray Type: TetraTop Flat Top Capacity: 9,000 cartons / h Filling machine TetraTop 170V, commissioning 2004, purchase contract 2003. The rated power of the machine is 9,000 EH /h. Formats: 1,000ml cartons, 750ml cartons and 500ml cartons mileage as of 31.08.2011: 13,772 operating hours. • 1x GSU for granulate transport • 1x granulate hopper • 1x HCCU for foam cleaning • 1x Volume adjustment type 190V converted to stainless steel cylinder • 1x 20 replacement cartridges • 2x tetraPak type Capper 20 screw-on machines for screwing on 38mm screw caps • 1x manual roller transporter for inserting the rollers into the ASU • 1x roller truck for roller transport • 1x retrofit air conditioner Rittal for  ...

1 of used swing-top bottling line. Originally used for filling beer (2°C) in 330 ml printed/sleeved glass bottles (D 60 mm x H 230 mm) with swing-top closures, at a speed of ± 1.900 bph. Additional size-parts included for 500, 750 und 1.000 ml bottles. Last used for bottling liquors. Wired for 415V/50Hz. Line hardly used and hence in excellent condition! Line consists of:Bottle feed table with 5 rows of stainless steel slat, stainless frame, with inliner and variable speed drive, new 2006. 1 lot interconnecting empty- and full bottle conveyors, stainless steel slat and frame, new 2006. 1 rinser/filler monobloc, make Cime Careddu (Italy), type DPS 9-8, new 2006, 9-head rotary rinser, no-bottle/no-spray, 8-head rotary counter-pressure filler with double pre-vac (built-in vacuum pump), height adjustable min/max 180 – 350 mm, diameter min/max 50 – 90 mm, CIP to drain, with Telemecaniq ...

AUTOMATIC BORING machine 35 spindles SCM TOP 35 second hand machine electric movement of boring head 0° / 90° technical details : n. 35 spindles center distance between spindles mm 32 center distance between first and last spindle of the drill head mm.1088 max. stroke of boring unit mm. 140 n.02 motors Hp 3 each one operating pressure atm 6-8 weight kg.800 volt. 380/50

AUTOMATIC BORING machine 35 spindles SCM TOP 35 second hand machine electric movement of boring head 0° / 90° technical details : n. 35 spindles center distance between spindles mm 32 center distance between first and last spindle of the drill head mm.1088 max. stroke of boring unit mm. 140 n.02 motors Hp 3 each one operating pressure atm 6-8 weight kg.800 volt. 380/50

AUTOMATIC BORING machine 35 spindles SCM TOP 35 second hand machine electric movement of boring head 0° / 90° technical details : n. 35 spindles center distance between spindles mm 32 center distance between first and last spindle of the drill head mm.1088 max. stroke of boring unit mm. 140 n.02 motors Hp 3 each one operating pressure atm 6-8 weight kg.800 volt. 380/50