HELMERDING er used machines

pressure: 110 t throat: 290 mm stroke: 20-124 mm no. of strokes: 60 / 90 Hub/min ram adjustment: 85 mm table surface area: ca. 920 x 590 mm ram surface: ca. 530 x 280 mm distance table to upper part of the press: ca. 450 mm hole in the table: ca. 180 x 300 mm mm table height: ca. 750 mm tool hole in ram: Ø 50 mm Number of working hours: 8214 h distance table to upper part of the press: mm weight of the machine ca.: 5,5 t dimensions: ca. 2000 x 2000 x 2600 mm overhauled by the manufacturer Helmerding in 2014 including conversion to new ones press safety control. Operating hours read since overhaul in 2014: 8214 Documentation of press safety control available electrical grease central lubrication Hydraulic clutch-brake combination Mechanical break plate in the ram two-hand operation foot control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: HELMERDING hiw, Single-column eccentric press type ERVL65B -Pressure capacity: 65 tons -Coupling: pneumatic -Drive: 5.0/6.0 kW 1440/2890 rpm -Stroke: adjustable 14 - 90 mm -Table size: 590 x 740 mm -Table cutout: 140 x 240 mm -Protrusion: 310 mm -Punch holder: Ø 40 mm -Insertion height 340 mm -Dimensions: 2070/1050/H2140 mm -Weight: 4430 kg

pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram adjustment: 85 kW table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: Ø280 mm table height: 830 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2560 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 150 t throat: 350 mm stroke: 20-120 mm no. of strokes: 50 / 75 Hub/min ram - range of adjustment: 85 mm table surface area: 1150x670 mm ram surface: 800x380 mm hole in the table: 330x200 mm table height: 800 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 8 t dimensions of the machine ca.: BxTxH 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 110 t throat: 295 mm stroke: 20-120 mm no. of strokes: 60/90 Hub/min ram - range of adjustment: 85 mm table surface area: 920x580 mm ram surface: 540x280 mm hole in the table: 300x180 mm table height: 830 mm tool hole in ram: Ø 50 mm weight of the machine ca.: 5,1 t dimensions of the machine ca.: BxTxH 1500x2000x2500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A complete punching line with Helmerding eccentric press is available. 1) Eccentric press Helmerding KDH 100, year of manufacture: 1997, power: 11kW, pressing force 30° before and after: 100t, stroke adjustment: 8mm-110mm, ram adjustment: 80mm, stroke rate: 40-140 strokes/min, length: 2100mm, width: 1500mm, weight: approx. 12000kg. 2) Kohler 1000.1 reel, year of manufacture: 1983, power: 1kW, load capacity: 1000kg, length: 1500mm, width: 1100mm. 3) Straightener Kötje RM-7-300-60, year of manufacture: 1998, power: 3kW, max. strip width: 300mm, straightening roller diameter: 60mm, number of straightening rollers: 7, length: 1400mm, width: 1200mm. 4) Roller feed Kötje EWV 80-50-S, year of manufacture: 1998, power: 4kW, length: 750mm, width: 700mm. Documentation available. On-site inspection is possible.

Single-column eccentric press HELMERDING type TPEP 12 BMasch. No. 831-101 Comm. No. 76228 Year of construction 1976Compressive force 12 ton. Projection 155 mmTable surface 400 x 320 mmTable opening 125 mmPlunger area 125 x 100 mmLifting adjustment 6-60 mmRam adjustment range 40 mmClamping pin hole 25 mm with clamping pieceInstallation height max. 250 mmStroke rate 180 strokes/min. Drive power 1.1kW- Electric foot switch and 2-hand operation- Setup, single stroke 2-hand, single stroke foot and continuous running foot, automatic

Drill, column drill, column drill, pillar drill, box column drill, tapping machine, tapping machine -Manufacturer: HIW Helmerding, drill press -Motor: 1.0/1.6kw -Speeds: 95 - 1050 rpm, 8 levels -Feed: 0.08/0.16/0.28 1/rev. -Table size: 500 x 400 mm, travel 685 mm -Spindle mount: MK3 -Spindle stroke: 180 mm -Projection: 280 mm -Dimensions: 1100/650/H2340 mm -Weight: 690 kg

pressure: 315 t stroke: 40-200 mm no. of strokes: 20-100 Hub/min ram - range of adjustment: 120 mm ram surface: 2000x1100 mm table surface area: 2000x1200 mm hole in the table: 1700x250 mm : 500 mm column travel -side: 820x650 mm total power requirement: 45 kW weight of the machine ca.: 44 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 315 t stroke: 40-200 mm no. of strokes: 20-100 Hub/min ram - range of adjustment: 120 mm ram surface: 2000x1100 mm table surface area: 2000x1200 mm hole in the table: 1700x250 mm : 500 mm column travel -side: 820x650 mm total power requirement: 45 kW weight of the machine ca.: 44 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 35 t throat: 240 mm stroke: 12-84 mm no. of strokes: 135 Hub/min ram - range of adjustment: 70 mm table surface area: 600x450 mm ram surface: 360x180 mm hole in the table: 220x130 mm table height: 630 mm tool hole in ram: Ø35 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: BxTxH 1500x2000x2600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An old eccentric press Elmerding with defective foot switch is available. Press capacity 30°: 25t, stroke adjustment range: 12mm-80mm, ram adjustment: 60mm, stroke rate: 120rpm, table adjustment: 150mm, safety distance: 144mm, weight: approx. 1450kg. Only 2-hand operation is possible. Documentation available. An on-site inspection is possible.

pressure: 80 t throat: 300 mm stroke: 8-110 mm no. of strokes: 100 Hub/min ram - range of adjustment: 75 mm table surface area: 750x590 mm ram surface: 540x400 mm hole in the table: 200x200 mm table height: 780 mm tool hole in ram: Ø 40 mm total power requirement: 11 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: BxTxH 1200x1700x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions: length 643 mm width 410 mm weight 14,5 kg material 1.4301 / AISI 304 suitable for fruit and vegetable juices scope of delivery: two pipe-screens, flap valves and tees piped, with cans 0,25 mm, 2x connection parts with slotted nut DN25 ; new machine - top condition

Used Used Case Erector Ape Form 1.200 Hm B: Year: 2002 Condition: As Is Used Case Erector Ape Year: 2002 Speed Model: FORM 1200 HM B Type: Cold glue Nordson Gluer Safety protections Code: G 82 More details: https://bottlingscout.com

Used Used Case Erector F 377.62: Year: 1998 Condition: As Is Used Case Erector F 377.62: Model: F 377.62 Year: 1998 Speed: 1680 cartons/hour Nordson hot seal Carton dimensions Minimum Maximum Parameter Length 245 mm 500 mm Width 150 mm 400 mm Height 80 mm 365 mm Lower flap 75 mm 170 mm Height + upper flap 200 mm 480 mm Length + Width 380 mm 820 mm Accident prevention protections Code: G 93 More details: https://bottlingscout.com

Used Used Case Erector Mondo&Scaglione 2015: Year: 2015 Condition: As Is Used Case Erector Mondo&Scaglione: Model: AUT MOD 300/N Year: 2015 Speed: 600 CPH Tape closure Dimensions of machinery: 2700 mm x 1400 mm x 2400 mm (h) Safety protections Code: G 96 More details: https://bottlingscout.com

Used Used Case Erector Maspack Mas 1200: Year: 2011 Condition: As Is Used Case Erector Maspack Mas 1200: Model: Mas 1200 Year: 2011 Speed: 1200 CPH Hot glue closure Preo Easy 5 Box format 3?2; 4?3 Automatic warehouse added in the 2020 Safety protections Code: G 94 More details: https://bottlingscout.com

Used Used Case Erector APE form 1200 hma: Year: 2004 Condition: As Is Used Case Erector APE form 1200 hma: Year: 2004 Speed: 900 CPH Model: FORM 1200 HMA Hot melt gluer ? NORDSON ? Year 2010 Safety Protections Code: G 90 More details: https://bottlingscout.com

Used Used Case Erector mh-fj-3a: Year: 2015 Condition: As Is Used Case Erector mh-fj-3a: Model: MH-FJ-3A Year: 06/12/2015 Closing box by Tape Layout: Lenght 3050 mm; Weidht 1240 mm (with plate for cartons close, otherwise 2240 mm) Haight: 1700 mm Speed: 10 CPM Safety protections Code: G 88 More details: https://bottlingscout.com

Used Used Case Erector Mondo&Scaglione: Year: 2007 Condition: As Is Year: 2007 Model: 382/C Speed: 15 CPM Gluer NORDSON Hot melt Safety Protection Dimensions: 2.400 x 2400 x 1.900 h Code: G 89 More details: https://bottlingscout.com

Used Used Case Erector Sge: Year: 2007 Condition: As Is Used Case Erector Sge Year: 2007 Speed: 8.000 bph Model: formacartoni Gluer included Safety protections Code: G 65 More details: https://bottlingscout.com

Used Used Case Erector Bortolin-Kemo: Year: 1996 Condition: As Is Used Case Erector Bortolin-Kemo Year: 1996 Speed: 25 pz/min Model: FORMATRICE CARTONI Type: Glue closure Type of boxes: American for 6 and 12 bottles Incollatore Nordson Safety protections Code: G 83 More details: https://bottlingscout.com

Used Used Case Erector Bortolin-Kemo Foc 23/30: Year: 2009 Condition: As Is Used Case Erector Bortolin-Kemo Foc 23/30 Year: 2009 Speed: 20 pz/min. Model: foc 23/30 For american boxes Type: glue system Gluer: nordson Safety protections Code: G 74 More details: https://bottlingscout.com

Used Used Erector Apsol Ace 30 Hm: Year: 2007 Condition: As Is Used Erector Apsol Ace 30 Hm Year: 2007 Speed: 1.500 Boxes | Hour Model: ACE 30 HM Gluer Formats: Boxes of 6 and 12 bottles Safety protections Code: G 78 More details: https://bottlingscout.com