5 HILMA clamping tools used machines

Fabr hydraulic vice: Hilma Jaw width: 200 mm

NC vices with 200mm jaw width

Pendulum jaw with 125mm width and 160mm width available Strongest version on the market! Extremely flexible.

thickness of jaw: 160 mm : 54 mm clamping width: 315 mm clamping capacity: 2,0 t weight: 60 kg dimensions of the machine ca.: 550 x 250 x 140 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 125 mm tension force: 40 kN machine weight ab.: 40 kg range L-W-H: x x x mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

electronic clamping elements, twist-and-turn clamps -Clamping force: 160 kN -stat. max.: force 30 kN -Clamping stroke: 15 mm -Total stroke: 60 mm -Dimensions: 720/200/H220 mm -Weight: 60 kg

electronic clamping elements, twist-and-turn clamps -Clamping force: 160 kN -stat. max.: force 30 kN -Clamping stroke: 15 mm -Total stroke: 60 mm -Dimensions: 720/200/H220 mm -Weight: 60 kg

electronic clamping elements, twist-and-turn clamps -Clamping force: 160 kN -stat. max.: force 30 kN -Clamping stroke: 15 mm -Total stroke: 60 mm -Dimensions: 720/200/H220 mm -Weight: 60 kg

Key data: 200 mm

Hydraulic Machine Vise Hilma 200 mm - 360° rotatable Made in Germany. Jaw width 200 mm. Clamping range up to 348 mm. Jaw height approx. 68 mm. 360° turntable with degree scale. Footplate 370 x 400mm Weight 120 kg.

Key data: 200 mm

Hydraulic machine vise Hilma 200 mm - 360° rotatable. Hilma 3741-05. Made in Germany. Jaw width 200 mm. Jaw height approx. 68 mm. Clamping range up to 348 mm. 360° turntable with degree scale. Base plate 370x 400 mm. Weight 120 kg.

Clamping plate, machine table with T-slots made of steelClamping tableClamping plate, clamping table, machine table SELF-MADEcan also be used as a straightening plate or welded plateTable surface: 2150 x 1040 mmOverall height: 200 mm- Top and bottom machined in parallel, planed surfaces- Table top L x W x H = 2150 x 1040 x 65 mm- Table top with some symmetrical holes Table top with M16 and M24 threaded holes, M16, M24, M16, M24 etc. Bore spacing in length: approx. 250 mm Bore spacing in width: approx. 255 / 165 /

Clamping table with T-slotsClamping plate, clamping block, groove tableClamping cube for radial drilling machineClamping surface top: L x W = 1200 x 800 mmClamping surface side: L x H = 1200 x 200 mmOverall height: 400 mmD- Grooves: 20 mmD- Groove spacing: 200 / 60 mmOverall dimensions L x W x H: 1200 x 800 x 400 mmWeight: 680 kg; used

Round clamping plate with T-slot straightening plate and clamping tableDiameter 1500 mmCentering hole in the middle 80 mmPlate thickness 54 mmWorking height 970 mm- 6 T-slots 18 mm- 3 threaded holes M20, bolt circle 1000 mm- Steel substructure without centric holeWeight 785 kggood condition; used

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Manufacturer: Forkardt, clamping claw clamping jaws for manual and power chucks -Clamping claw: Type SKA 140-32 -Clamping jaws: Type KBN 12 -Dimensions: see photo -Total dimensions: 105/200/H80 mm -Total weight: 4.3 kg

clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools, step claws, low clamps, clamping irons, step blocks, clamping screws, T-slot screws, slot screws, T-slot nuts -Clamping tool clamping screw set with storage box -Type: various versions, see photos -Thread: M20 -Price/Delivery: complete -Dimensions box: 380/315/H60 mm -Total weight: 11.7 kg

Interchangeable jaws, top jaws, segment jaws, clamping jaws, block jaws, base jaws, four-jaw chucks, four-jaw lathe chucks, 4-jaw chucks, faceplate, faceplate chucks, facing lathe chucks, clamping device for dividing head -Clamping jaws: 4 pieces for four-jaw chuck, faceplate chuck, dividing head -Clamping width: 55 mm -Dimensions: see photo -Shipping/Price: complete -Dimensions: 200/60/H140 mm -Weight: 3.4 kg/piece

Stock Number: 3805 Machines vice Manufacturer: ROEHM, Type: RKK 2 Machine NO.: 983 004 N Specifications: Width 115mm Max. öfning das schaubstock 0-170 mm Length: 350 mm, Height: 133 mm, Width: 125 mm, Weight: 33 Kg

Stock Number: 3806 Machines vice Manufacturer: ROEHM, Type: RKK 2 Machine NO.: 151953 0004 P, Year of manufacture: 0 Specifications: Width 115mm Max. öfning das schaubstock 0-170 mm Length: 350 mm, Height: 133 mm, Width: 125 mm, Weight: 33 kg

weight: . kg taper MK: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Technical data: Length: 400 mm Width: 495 mm Height: 800 mm

Timing belt+clamping roller DEUTZ BF4L1011 (=OE 02929933) Net= 67,- Timing belt+clamping roller DEUTZ BF4L2011 (=OE 02931480) Net= 151,- Timing belt F/BF3-4M1008 Net= 50,- Clamping roller F/BF3-4M1008 Net= 76,- all price plus Shipping+VAT info@miw-zeven.de

Measuring scraper 150 mm, still original welded in plastic foil with artificial leather case, with mm and inch - pitch, Steinless - Hardened, with thread table on the back for Metr.- ISO and Whitworth. Smaller batches can also be dispensed. 5.00 €/piece, stock approx. 25 pieces

Length: 350 mm Width: 150 mm Polarity ~ 9 mm Space requirement approx.: L: 440 x W: 210 x H: 135 mm Voltage: 24V Power: 2,04A

-Mm 2.990 -1,990 mm width -Height of 5,080 mm -Weight 18,200 kg -125 x 125 - M24 thread size - pitch number of thread 640 units

Technical Data: Length: 620 mm Height: 500 mm Width: 380 mm