3 HITACHI SEIKI cnc turning machines used machines

turning diameter: 254 mm turning length: 600 mm control: Seicos total power requirement: 15 kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 2,5 x 1,3 x 1,87 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8891 Type: HT 20 RIII Producer: Hitachi Seiki Generated: 2000 Parameters: Maximum turning length: 304.8 mm Max. turning diameter: 203.2 mm Maximum turning diameter over bed: 450 mm Maximum spindle speed: 5000 1/min Travel X: 400 mm Travel distances Z: 600 mm Number of tool positions: 12 Length: 2730 mm Width: 1930 mm Height: 1400 mm Weight: 4600 kg Equipment: Grasshopper Technical documentation Tool Holder Mayfran Chip Conveyor Hainbuch clamping

turning diameter: 320 mm turning length: 1100 mm control: Fanuc total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gantry type grinding machine Make: Hiatachi Seiki Modell: 9GA-NRAA Table: 2500 x 1200 mm Max. Table travel: 2000 mm Capacity: 1500 x 900 x 500 mm Control: Fanuc 15 MA Year: 1995

turning diameter: 450 mm turning length: 380 mm control: FANUC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1000 mm, 510 mm, 450 mm

CNC control SEICOS (Sigma) 18M, speed range 120-12000 rpm, 22 / 18.5 KW Tool holder SK 40, tool magazine with 30 places, IKZ mt 15 bar, HSC machine package for precise milling at high feed speed Dimensions: Width x depth x height 2900 x 2400 x 2786 mm, weight approx. 8200 kg Please note: The machine is not usable, tool clamping of the SK 40 mount is defective. Tool changer can therefore not change.

PLC, control panel, operator panel, control machine -The front of the control panel comes from: a Hitachi Seiki type HC400 machining center -Manufacturer: Hitachi Seiki -Control: FANUC -Dimensions: 400/310/H100 mm -Weight: 3.8 kg

Axis control, electronic handwheel, control unit -The electronic handwheel was removed from a CNC machining center make: Hitachi Seiki type: HC400. Other spare parts available. -electronic handwheel for Hitachi Seiki type: HC400 -Dimensions: 170/120/H80 mm -Weight: 0.6 kg

Tool changer chain, chain magazine, tool changing system, tool magazine -The tool changer comes from CNC machining center make: Hitachi Seiki type: HC400 -Tool changer for: Hitachi Seiki type HC400, other spare parts available. -complete with: gripper arm and drive -Tool changing positions: 80 -Intake: SK40 -Dimensions: 2270/630/H1725 mm -Weight: 860 kg

A defective spare parts donor of a Hitachi Seiki lathe including an IEMCA bar feeder is available. 1) CNC lathe Hitachi Seiki GT 20 S II, travel X/Z: 200mm/400mm, max. turning diameter: 210mm, max. swing diameter over bed: 380mm, max. bar diameter: 51mm, spindle bore: 59mm, speed: 5000rpm, tool stations: 10, rapid traverse: 20m/min. Machine dimensions X/Y/Z: approx. 2350mm/1950mm/1850mm, weight: approx. 4100kg. The capacitors for the power connection are defective. 2) Hydraulic bar feeder IEMCA TAL/AUTO 65/32, max. bar diameter: 65mm, max. bar length: 3200mm, machine dimensions X/Y/Z: approx. 4200mm/800mm/1200mm, weight: approx. 800kg. The lathe is sold exclusively as a defective spare parts donor. An on-site inspection is possible.

x-travel: 600 mm y-travel: 580 mm z-travel: 580 mm control: SEICOS 16M B-axis (table): 360 x 1° mm feed X/Y/Z/-axis: 1 - 50.000 mm/min rapid traverse X/Y/Z: 50,00 m/min turning speed range - stepless: 35 - 12.000 Nm spindle drive: 22,00 kW max. torque on the spindle: 236 tool taper: BT40 toolpiece magazine: chain magazine: 61 Stück size of pallet: 2x 400x400 mm max. workpiece diameter: 630 mm workpiece height max.: 680 mm workpiece weight max.: 400 kg total power requirement: 30,00 kW weight of the machine ca.: 12,00 t dimensions of the machine ca.: 4,00 x 3,50 x H3,00 m With SEICOS S16M control unit, coolant system, chip conveyor, electron. handwheel, dust exhauster. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:560 mm y-travel:450 mm z-travel:450 mm table surface area:760 x 410 mm turning speed range:8.000 U/min total power requirement:20 kW Vertical Processing Centre

x-travel:600 mm y-travel:580 mm z-travel:580 mm numbers of pallets:2 pallet size::400 x 400 mm max. workpiece weight:400 kg spindle taper ISO:40 spindle speeds::35 - 12000 feed speeds:1 - 50000 mm/min rapid speed:50 m/min total power requirement:25 kW weight of the machine ca.:12 t dimensions of the machine ca.:3,6 x 3,6 x 2,9 m with CNC SEICOS 16 M ( FANUC base ) autom. toolchanger 61-pockets pallet indexing 1° chip conveyor and coolant attachment exhauster clamping cube and diverse toolholders

Inv. Num. : 7688 Type: 203 F2 Producer: HITACHI Generated: 2000 Parameters: Control System: MARK-10W Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 250 mm Max. travel length of the Z-axis: 170 mm Feed length in U-axis (-): 20 mm Feed length in the V-axis ( -): 20 mm Maximum wire thickness: 0.25 mm Dielectric container capacity: 160 l Max. workpiece dimensions: 450 x 350 x 170 mm Max. workpiece weight: 200 kg Machine height: 1880 mm Machine length: 1525 mm Machine width: 1810 mm Machine weight: 1500 kg

The X-MET8000 handheld XRF devices offer high performance for the reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy are required. Friendly The intuitive, icon-based user interface requires minimal operator instruction. Excellent ergonomics Lightweight (only 1.5 kg), compact, ergonmomic. You can use the X-MET for a lo ...

Laser handheld spectrometer VULCAN for quick and easy chemical elemental analysis. Vulcan is one of the fastest metal analyzers on the market and is designed for durability. It offers reliable material identification in just one second, based on laser-induced plasma spectrometry, without any X-rays. Whether for scrap sorting or PMI quality control, Vulcan always provides precise and consistent material ID data. Significant increase in productivity An increased number of analyses per day makes all the difference, especially with extensive inventories. Low operating costs Because Vulcan is a laser device, employees don't have to attend expensive and time-consuming radiation training and certification training. Long-lived Vulcan is IP54 certified (equivalent to NEMA3) and meets military standards for robustness (MIL-STD-810G). It also comes with a 3-year warranty. Prove ...

Optical Emission Spectrometers (OES) are characterized by the fact that they provide complete chemical analysis, even of critical alloying elements at low detection limits, which handheld XRF and LIBS devices cannot achieve: carbon, phosphorus, sulfur, boron, arsenic and tin in low-alloy, stainless steels and nitrogen in duplex steels. For this reason, spark spectrometry is the world's most reliable and widely used method for creating and verifying MTR's (Mill Testing Reports). Our instruments also meet the world's most stringent PMI testing requirements for metallurgical alloy chemistry, including API 5L testing, API RP578, ASME Section IX B& PV, ISO 17025 and A2LA standards.

Hitachi chain moulder 110 V This article is in good working condition. The chain size is 30 mm and is out of focus. Chain mortiser for fast, clean, and precise nicks or cuts through holes in wood. Ideal for fences, sheds, huts, restoration and much more.

Laser handheld spectrometer VULCAN for quick and easy chemical elemental analysis. Vulcan is one of the fastest metal analyzers on the market and is designed to last. It provides reliable material identification in just one second, based on laser-induced plasma spectrometry, without any X-rays. Whether for scrap sorting or PMI quality control, Vulcan always provides accurate and consistent material ID data. Significant increase in productivity An increased number of analyses per day makes all the difference, especially for extensive inventories. Low operating costs Because Vulcan is a laser device, employees do not need to attend expensive and time-consuming radiation training and certification training. Long-lived Vulcan is IP54 certified (equivalent to NEMA3) and meets military ruggedness standards (MIL-STD-810G). It also comes with a 3-year warranty. Proven It is ...

XMET8000 handheld spectrometer for quick and easy elemental analysis and many other possibilities. The X-MET8000 handheld XRF instruments offer high performance for reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy is required. Friendly The intuitive, icon-based user interface requires minimal operator instruction.  ...

HITACHI WIRE EDM MACHINE MODEL MS 250 H-CUT 8Q X-AXIS STROKE: 1030 MM Y-AXIS STROKE: 810 MM Z-AXIS STROKE: 530 MM

Mfc.: Hitachi Type: 6-Hi reversing mill Built: 1976 Shut down: 2014 Revamped: 2010 Control system – changed DC to AC motors Load cells were replaced in March 2005 & thickness gauge in March 2009 Roll coolant cooler was replaced in July 2009 Control boards of hydraulic screw down & electromagnetic valves were replaced in 2009. Strip width: 610 – 1330 mm Thickness Entry: 1.6-4.5 mm Exit: 0.15 – 2.3 mm

The Vulcan is Hitacht's fastest metal analyzer with the most advanced display and reporting system. Compared to its predecessor, the m-Pulse, it has been fundamentally redesigned and offers many new possibilities, such as GPS, camera, WiFi and pre-burning function. The operation is functionally oriented to the menu guides, as they are known from smartphones. The operation of the device via the functional touchscreen is correspondingly easy. The equipment offered here comes from our demonstration pool and is only 12 months old, so it is still sold with a used machine warranty.

The OE750 spark spectrometer and the new OE720 are metal analyzers with new, groundbreaking performance features. With them, you can analyze all elements found in metals* at low detection limits and with state-of-the-art multi-CMOS technology. Ever stricter requirements, complex supply chains and the increasing use of scrap as a base material are forcing foundries and the metalworking industry to reliably detect the lowest ppm values of traces and accompanying elements. Until now, spark spectrometers in these power ranges have been unwrive for many. With the OE series, this has now changed fundamentally. Hitachi OE spark spectrometers analyze all essential alloying elements and extremely low levels of trace, accompanying and treatment elements in metals, e.B nitrogen in steel. The OE750 also covers rare applications such as oxygen in copper and oxygen, nitrogen and hydrogen in tita ...

Hitachi HPLC System LaChrom Elite -Power Box -L 2130 Gradient Pump -L 2300 Column Thermostat -L 2200 Autosampler (cooling) -L2455 DAD Diode Array Detector