3 HOFMANN tilting spindle moulders used machines

According to the PDF prospectus!

SPECIFICATIONS: Swiveling spindle milling machine Table size mm: 1200 x 820 vertical spindle stroke length mm: 180 I Spindle diameter mm: 50 II Spindle diameter mm: 30 Powerlock Spindle speed: 10,000 rpm. Motor power KW: 7,5 Complete with: -Control panel - 4-roller feed with variable adjustment

HOFMANN swivel spindle milling machine TFS 1200 Year of manufacture: 2004 S/N 127-01323 Manufacturer: Hofmann Bad Windsheim from a training company very good condition electric height and swivel adjustment manual height and swivel adjustment for fine adjustment analogue display for height adjustment, height adjustment 125mm Table size 1200 x 820mm and table extension 200 x 820mm Swivel range -5° to + 45 Spindle speed 3000/4000/5000/6000/8000/10000 rpm. Milling spindle D=30mm milling mandrel MK5 Engine 4.7 Kw / 6.3 hp Suction nozzle D=120 mm Side roller table with eccentric hold-down device and adjustable angle stop Height adjustable with handwheel CE mark Weight 1300 kg

A Hofmann tilting spindle moulder is offered. Table size X/Y: approx. 1200mm/815mm, working height: approx. 895mm, height adjustment: approx. 145mm, spindle tilt range: -45.5° to +45.5°, spindle diameter: 30mm, max. tool diameter: 250mm, spindle speeds: 3000/4500/6000/9000rpm, dust extraction ports: 2×120mm. Dimensions: approx. 1250mm/815mm/1700mm, weight: approx. 950kg. Inspection by appointment is possible.

Storage number: 3552 CNC ROTARY TABLE Manufacturer: HOFMANN, Type: RW-NC 220 Machines NR.: 02368 30JO2, built: 2009 Specifications: Table size 220 mm Center Height 220 Partial 0.001 Degree Control SIemens 840D Hori/Vertical Accessories: Riding stock - manual Length: 600 mm, Height: 800 mm, Width: 400 mm, Weight: 200 kg

HofmannLangloch drill Brand Hofmann Type LL150 Year of construction Specifications: drilling depth max. 145 mm (drill head movement) Drilling length: max. 230 mm (table movement) Vertical drilling spindell run max.135 mm Drilling: Drilling depth limitation Table: side ward movement via sep. Handle Cast iron table: solid with mechanical product clamp Height adjustment: Handwheel Motor power 1.3 kW Chuck 5 - 20 mm Condition: functionally tested

degree: 0 working heigth: mm length: mm width: mm depth: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table diameter: 630 mm table load: 1 t table height: 170 mm total power requirement: 0 kW weight of the machine ca.: 330 kg dimensions of the machine ca.: 900*750*170 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 160 / 180 mm Control: NC total power requirement: ? kW weight of the machine ca.: 120 kg dimensions of the machine ca.: 500 x 230 x 270 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 520 mm y-travel: X mm z-travel: X mm weight of the machine ca.: 0.2 t Dividing head with collets www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 630 mm, 250 mm, 8 kW

Hofmann D632 Thickness Planer Brand: Hofmann Type D632 M-No.: 2533 Year of manufacture 2005 Main motor 7.5 KW - 400 V Speed 5,000 tpm Knife shaft Z-4 Circle ø125 mm Planing width 625 mm Planing thickness 3.5 - 275 mm Spahn removal max. 8 mm Thickness table length 1,000 mm Feed rate 7-14 m/min. Weight 980 KG

NC Branch Hofmann RWNC 160 Tip height: 160 mm With tailstock

This HOFMANN CVK11-BH4 was manufactured in 2019. It is an balancing machine designed for precise and reliable operations. Ideal for applications requiring precise balancing of rotating components. Contact us for more information about this machine.

Balance weight, wheel weights, balancing weights -25g -30g -40g -50g -60g -100 g -200 g -Complete sale -Weight: 24kg

Key data: 625 mm, 245 mm, 5 kW

HOFMANN AD 635 YOC 2020 Motor power: 5.5 kW 4-knife shaft (TERSA) Feed: 2 speeds (7 + 14 m/min) Max. planing width thickness planer: 625 mm max. planing width dressing line: 610 mm Planing height: 4 - 245 mm Chip removal: Dressing: 4 mm Thickness planing: 8 mm Table length Feed table length: 1.25 m Pick-up table length: 1.25 m Thickness table: 1.00 m Mounting tables on the thickness table 2 x 100 cm electr. Table height adjustment with positioning control Steel Feed Roller Rubber pull-out roller CPS Knife Shaft Guard Integrated Aigner auxiliary stop Extraction connection: 2x 160 mm Engine brake Operating instructions 4 new knives Weight approx. 1,300 kg Machine Dimensions: 250 x 113.5 x 98.5 cm (LxWxH) Operating hours read: 478 h *Manufacturer information

Combined dressing and thickness planing machine from Hofmann with 4-knife Tersa shaft, very robust mechanical engineering in a compact design Special feature of this machine: The dressing table does not have to be opened for thickness planing, so no conversion is necessary Planing width approx. 500mm Thickness table electrically adjustable with digital display Rubberized feed roller, new Rubberized pull-out roller, new Planing height approx. 4 - 245mm 2 feed speeds 7 + 14 m/min Table length 2400mm Drive motor 7.5kW with automatic motor brake and soft start device 4-knife shaft with new Tersa reversible knives slit table lips Planing Shaft Protection TX-GL Swivel stop with joining strip Hollow and pointed joint adjustment of dressing tables Rod for hanging the extraction hood Suction nozzle 2 x 160mm Emergency stop switch Original paint, only a few places re-dabbed ...

Spindle swivel: No; Height adjustment: handwheel; Swivel adjustment: -; Milling jaw adjustment: manual; Altitude display: Scala; Swivel angle indicator: -; Milling stop indicator: Scala; Milling spindle diameter: 30 mm; Speeds: 3000, 4000, 5000, 6000, 8000, 10000; Motor power: 5 / 6.2 kW; Engine brake: Yes, automatic; Extraction port: 2 x 120mm; Machine length: 2600mm; Machine depth: 900mm; Weight: 700kg;

Dowel hole drilling device: pitch 16, 22, 25, 32; Drilling depth: 145 mm; Elongated hole length: 240 mm; Height adjustment range: 135 mm; Motor power: 1.3 / 1.8 kW; Speed: 1400 / 2800 rpm; Hold-down: manual; Extraction connection: 100 mm; Machine length: 1280 mm; Machine width: 960 mm; Weight: 300 kg;

- Balancing machine for wheel sets - Work load up to 5000 Kg - Kell B11 Vision CEMB controller

Professional spindle grinding machine with aluminum sliding table and tilting device KUSING SFna 1200. Technical parameters: Power of the main engine: 3 kW (4 hp) Spindle diameter: ø 30 mm Spindle length: 140 (120) mm Stroke of the spindle: 170 mm Maximum tool diameter: ø 180 mm Tool speed: 3000/5000/8000 rpm The size of the iron table: 980 x 450 mm Size aluminium table: 1200 x 360 mm Tilt: 0-45° Weight of the machine: 320 kg Formatting trolley of the highest quality according to the principle of hardened rod guide (ALTENDORF principle) KuSING has been manufacturing woodworking machines since 1991.

Weibert WJ-F10 Swivel spindle milling machine Milling machine: swivel 90°-45° Milling U/min 1400/3500/6000 and 8000 Sliding table 1150mm (Optional 1600mm) Engine power: 400V 3 KW (4.0 hp) WY-600100 Options at extra cost: Telescope 900mm WJ-600108 Eccentric tensioner Milling motor 4 KW (5.5HP), S1 100% Milling motor 5.5 KW (7.5 HP)S1, WJ-600102 Milling spindle 40,50 or 60mm, Integral safety rails 500mm, WJ-500111 Right and left-hand milling machine, WJ-600106 Table extension right/left, WJ-600107 Feed

Brand: Martin Type: T25 M-No.: V172604 Year of construction: 1990 Motor power: 5/6 kW Swivel milling spindle: -5° - +45° Milling mandrel : 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Cone of the milling spindle: MK5 Table size: Table extension 2,500 mm and table distribution (= extendable support) Automatic milling spindle start-up/bremzing via rotary knob Control panel: eye level with digital reading Spindle height -5° - +45° electromotive angle adjustment with digital readout Inclination -5° - +45° 150 mm Electromotive heights Adjustment with digital readout Feed: five-pole. Socket with operation via central control

Weibert WJ-F10 Table milling machine new • New version: WJ-F10-1150 • Milling machine: swivel 90°-45° • Milling machine rpm 1400/3500/6000 and 8000 min. • Sliding table 1150mm (optional 1600mm) • Motor power: 400V 3 KW (4.0 HP) • WJ-600100 • Options at extra cost: • Telescope 900mm • Eccentric clamp • Milling motor 4 KW (5.5HP), S1 100% • Milling motor 5.5 KW (7.5 HP)S1 • Milling spindle 30mm • Eccentric clamp • Integral safety rails 500mm • Clockwise and counterclockwise rotation • Table extension right/left

Table dimensions: 1100 (2300) x 760 mm Motor output: 7,5 kW Spindle diameter: 30 mm reus: 1500 - 10000 U/min Weight: ca. 880 kg Panhans swivel milling machine 245|200 ------------------------------------ Technical specifications ------------------------------------ Pos. 1: Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Extraction connection 2 x Ø 120mm Stepless speed regulation 1500-10000 rpm Engine power 7.5 kW (10 hp) Net weight approx. 880kg Technical description: 7 touch control, optionally usable, top and below 7 capacitive touchscreen, even with gloves operable (e.g. with Maxi Flex) Language switching German, English, French (other languages ??on request) Milling zero point selectable in the program, 3 reference points Simple menu structure through innovative touch control (max. 2 levels) Display ...

Martin T25 Swivel spindle milling machine with 5 axis control Brand: Martin Type: T25 M-No.: V252368 Year of Make: 1998 Engine power: 7.5/9.5 kW or 10/13 hp, 2 speeds Dalander engine Swivel milling spindle: -5° to +45° Milling mandrel: ø30 mm Spindle mount: ISO quick-change system with 30 mm Height adjustment milling spindle: 150 mm Speeds: 3000/4500/6000/9000 rpm Table size: Table extension 2,400 mm and table widening (=extendable support) Control panel: CNC control at eye level with LCD screen Spindle height CNC-controlled electromotive spindle height adjustment (program controlled or manual control) Tilt -5° - +45° CNC-controlled electromotive angle adjustment (program controlled or manual control) Stops: CNC-controlled electromotive adjustment of the two stops in relation to the milling mandrel (program controlled or manual control) CNC-controlled electr ...