HP jet used machines

Used pump for milk, made by HPM, model H 55 P. New 2002.

Crack Control Panel type EOK Through light control for detection of hairline cracks in the foil before filling

Y.O.M.: 2002 Factory No.: 02050057 Power: 500 l/h, motor: 22 kW Pressure: 1000 bar as good as new with manual Dimensions LWH: 1400 x 1000 x 1250 mm Weight: 900 kg

Out-of-the-box recovery connections can be created with the HPE 1950 Switch Series using the Spanning Tree Protocol, Rapid Spanning Tree Protocol, and Multiple Spanning Tree Protocol standards. Key connections are distributed across multiple units in a logical stack for greater resiliency. Sold as a complete package with the following components: 1x HPE Office Connect 1950 JG961A 24-Port (PoE) 2x HPE Office Connect 1950 JG962A 48 port (no PoE) 13x HPE Office Connect 1950 JG963A 48-port (PoE) 10x HP A-RPS1600 JG136A Power Supply

Intermittent Carton Packaging Machine ZHJ-150 Exhibition Machine/ Exhibition Machine Multifunctional Cartoning Machine ZHJ-150 ZHJ-150 automatic cartoning machine is suitable for packaging aluminum PVC blisters, round bottles and special bottles, Shaped bottles and similar products. Package inserts can be folded automatically, cartons can be erected, products can be fed and the cartons can be resealed (offset plug-in closure). Embossing can be made on the cartons. This machine has PLC control, with each station monitored by photoelectric sensors. If there is a problem detected during operation, the machine will automatically stop and display the fault. This machine can run as a single machine and can also be connected to a blister packaging machine and other pre-machines. The machine can be viewed at any time in 73084 Salach/Germany and tried out with your products. Dependin ...

* General * SKU401S1130 * LocationBarneveld * CEcheck * MakeEmerson network power * Main Features * Heating (medium)Gas * Temp.18 °C * Specified Features - Temperature control unit * Temperating machinecheck * With coolingcheck * Temperature18-27°C. * With temperature controllercheck * With controlcheck * MaterialMild steel * General * TypeHPF12U302A3P10020 * Mach.No.10940780001 * Year of construction2012 * With switchcheck * With switchgear( as is) * Floorspace0,9x0,75 m * Total height2,05 m * Weight300 kg * Extra Specificationsthis machine is used to cool airOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherSolventsDetergent & surf.Other pharmaceuticsCosmeticsOrganicsE-waste & metalFood additivesSugarTemperature control unitsLubricants & oleoDairyAnimal feedOther feedConf ...

Hydraulic power pack, hydraulic pump, hydraulic pump, universal power pack -Handover: in the current state as viewed -Use: as a spare part stock -Hydraulic unit: from Gruse lifting table ELT 1.5-10-1 -Motor: HPI 2.3 kW/2750 rpm -Hydraulic pump: HPI A5087577 -Price: per piece -Number: 2 pieces -Dimensions: 550/700/H180 mm -Weight: 39 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from order picking forklift type ECE 20 -Hydraulic pump: Type 50125677 -Motor: Type AU3480 24V 1.5kW -Dimensions: 200/175/H360 mm -Weight: 9.7 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from picking truck type ECE 118 -Hydraulic pump: type 50125677 -Motor: Type AU3480 AMJ5729 24 V 1.5 kW -with: tank and control valve -Number: 4x unit available -Price per piece -Dimensions: 200/180/H370 mm -Weight: 10 kg/pc.

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from picking truck type ECE 20 -Hydraulic pump: type 5090979 -Motor: Type AU3480 24V 1.5 kW -with: tank and control valve -Dimensions: 200/180/H370 mm -Weight: 9.8 kg

Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: HPI MEZ, hydraulic unit with double hydraulic pump -Hydraulic pump: HPI type 1BA2018/2008L10 -Engine: MEZ 7.5 kW 1450 rpm -Dimensions: 755/360/H305 mm -Weight: 94 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor, hydraulic gear pump -Manufacturer: HPI, hydraulic pump from electric high lift truck Linde L 12 -Hydraulic pump: Type A5088869 -Motor: 24 V 2.2 kW -Hydraulic tank -Dimensions: 305/157/H540 mm -Weight: 11.6 kg

Impressions=0 m, Condition= New , Availability= 2026-07-07, 16” Large full touch LCD screen. Fully automatic paper cutting function. Program storage capacity of up to 300 programs. 90,000 motion storage capacity. Maximum trench speed 36m/min. Cutting speed: 42-45 pcs/min Trench precision 0.01mm. Fully automatic paper cutting function. Eight language options. Measurement and blade movements can be seen on the screen. Metric system options. Data transfer via USB and programming and adjustment by PC. New modern design. It has many security measures. German security photocells. German hydraulic system. Italian oil pump. Panasonic servomotor. Siemens PLC. Italian balance valve.

Impressions=0 m, Condition= New , Availability= 2026-08-20, Max. Width: 1300 mm Max. Sheet Size (L × W): 1200 × 900 mm Min. Sheet Size (L × W): 500 × 400 mm Max. Sheet Height: 1600 mm Min. Sheet Height: 700 mm Max. Lifting Capacity: 2000 kg Voltage: 380/220 V Power: 12 kW Net Weight: 3400 kg Machine Dimensions (L × W × H): 292 × 202 × 222 cm Packing Dimensions (L × W × H): 310 × 220 × 210 cm Air-Blowing and Vibrating System

Impressions=0 m, Condition= New , Availability= 2026-08-20, 16” Touchscreen Fully automatic paper cutting function Storage capacity for up to 100 programs Storage capacity for up to 10,000 operations Maximum back gauge speed: 36 m/min Cutting speed: 45 cuts/min Two HSS blades Display resolution: 0.01 mm Positioning accuracy: 0.01 mm Back gauge speed: 16 m/min 8 language options Data transfer via USB and PC programming CE and FCC certified Panasonic servo motor Siemens PLC American (AB) safety photoelectric cells French (TE) main electronic components German (WESSEL) hydraulic system Japanese (OMRON) electronic system Italian oil pump Italian balancing valve Excellent condition

Max. cutting width: 920 mm • Max. cutting length: 920 mm • Max. pile height: 120 mm • Min. cut: 25 mm (without false clamp plate) / 90 mm (with false clamp plate) • Max. clamp pressure: 30,000 N • Max. cutting speed: 42 cuts/min • Front table length: 632 mm • Main motor: 3 kW • Power supply: 380 V, 3-phase • Drive: hydraulic

* General * SKU200W006 * MakeHPV * LocationBarneveld * TypeRV Base SO * Main Features * MaterialStainless steel * Motor7.5 KW * Specified Features - Inline mixer * Continuous reactorcheck * Rotor sizesDia. 75x15 mm * Inletdia. 40 mm * OutletDia. 30 mm * Number of stages:2 * Capacity2500l/h * Max. temperature160°C * With mechanical sealcheck * Motor7,5 kw, 400V, (EX) * With frequency controllercheck * Rotor speed6000 rpm * With vesselcheck * Capacity2x 600l * Vessel sizesDIa. 790x1400 mm * Inline high shear mixers * Capacity0,6m³/h * With motor1,5kW, 400V, 720rpm (EX) 2x * With frequency invertercheck * Specified Features - Inline mixer * MaterialStainless steel 1.4404 (316L) * General * No.2002-M-1 * Year of construction2013 * With switchgear(as is) * Floorspace4,0x3,0 m * Total height2.5 * Extra SpecificationsSkid mounted stainless steel RV base SO.with:IKA, type Dispax-reactor DR2000 ...

* General * SKU297Y563 * MakeCondux * TypeCFS 8 * LocationBarneveld * Main Features * Motor2.2 KW * Inlet diameter60 mm * Specified Features - Jet Mill * Rotor size85 mm * Grinding room sizeø 200x350 mm * Housing dimensions ø 200x350 mm * InletDN60 * Motor2,2 kW (220/380 V 2840 rpm) * Jet Mills * MaterialStainless steel 1.4571 (316Ti) * General * Floor space1,15x0,40 m * Total height0,95 m * Weight210 + 70 kg * Extra SpecificationsOutput DN35,&:nbsp:with K-tron screw feeder, type K2, with digi driver, 2000 rpm, input Dia. 220 mm, with stirrer.Jet MillsNew arrivalsConduxMills > Jet MillsNew arrivalsBrand > Condux What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...

* General * SKU297Y562 * MakeCondux * TypeCGS32/V-DSF * No.93102312 * Year of construction1994 * Main Features * Motor4 KW * Inlet diameter100 mm * Specified Features - Jet Mill * Rotor sizeø 170 mm * Grinding room sizeø 340 mm * Housing dimensions ø 340 mm * InletDN 100 * Motor4,0 kW (400 V 2900 rpm) * Jet Mills * MaterialStainless steel 1.4571 (316Ti) * General * Mounted on framecheck * LocationBarneveld * Floor space1,30 x 1,20 m * Total height2,00 m * Weight580 kg * Extra SpecificationsOutput DN80Jet MillsNew arrivalsConduxMills > Jet MillsNew arrivalsBrand > Condux What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

New water jet cutting machine Manufacturer: aps Type: Jetcut integral 2030 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -New high pressure pump 22 kW -New Abrasivausrüstung cutting head, Abrasivdosierer and reservoir workspace: 2000 mm x 3000 mm Dimensions: L: approx. 4600 mm, B: approx. 2900 mm, H: approx. 1500 mm Z-axis: 180 mm, full servo axis, optionally with collision protection Cutting speed: up to 15 m / min. Positioning accuracy: ± 0.1 mm Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pressure: depending on the used hi ...

1 ALLIANCE sample high temperature jet dyeing machine, type Baby Jet, capacity 4 to 10 kg (according to the weight and composition of the fabrics), year 1996, maximum dyeing temperature 140 ºC, machine equipped with filter, TCA 200 dye cycle controller, winch is inverter controlled (OMRON), with addition vat, Machine delivered fully erected ready to connect to media (no cables and no pneumatic pipes a disconnected for the transport

# HP Jet Fusion 540 3D-Drucker (2019) – MJF-System mit geringer Laufzeit Gebrauchter HP Jet Fusion 540 aus 2019, ursprünglich für R&D-Anwendungen beschafft. Das MJF-System wurde durchschnittlich einmal wöchentlich für Prototypenentwicklung eingesetzt – deutlich unter industrieller Vollauslastung. Entsprechend sehr guter Erhaltungszustand. Technische Eignung: Kleine bis mittlere Losgrößen Funktionsteile und Prototyping Anwendungen mit Anforderungen an Detailgenauigkeit und Maßhaltigkeit Materialeffizienz: Bis zu 80 % des Pulvers wiederverwendbar. Automatische Vermischung von Alt- und Neumaterial erfolgt maschinenseitig, was Materialkosten reduziert. Wartungsstatus: Professionelle Wartung bis Ende 2024 durchgeführt Alle Komponenten original HP (inkl. Druckköpfe) Keine Produktionsaufträge in 2025 Hinweis: Gasdruckfedern der Bauraumtür verschlissen, Austausch erforderlich Lief ...

Manufacturer: Falch Model: Wheel Jet 30 2000-8-0-E Type of Machine : HD Water Jet Machine Specifications: - Pressure: 2000 bar - Flow rate: 8 l/min - Power supply: 400V, 63A Included Accessories: - 5 m high-pressure hose (false non-stop) - Safety equipment: suit, apron, helmet Find more here - .ucymachines/ Contact us at - sales@ucymachines

Cutting dimensions X/Y: 3000mm/2000mm. The cutting head of the machine currently cannot be moved downward or upward. This problem can be resolved with a small spare part. The machine was used in the stone processing industry. Documentation available. An on site inspection is possible.

ECONOMOS IP 4000 Seal Jet CNC lathe for seal production was built in 2000 in Austria by ECONOMOS AUSTRIA Gesellschaft m.b.H. The machine is designed for the production of technical gaskets and sealing elements of various dimensions and profiles. The advanced SEAL-JET technology enables the rapid production of both single parts and short series with high dimensional accuracy and repeatability. The ECONOMOS ECONOM IP 4000 Seal Jet lathe for gasket production is distinguished by its sturdy, welded design with integrated chip trough. Machining is performed by a main spindle rotating at a maximum speed of 3000 rpm. The spindle, guided in precision bearings and encased in a rigid grey cast iron body, ensures high machining stability even under heavy loads. The integrated cooling system effectively dissipates the heat generated during machining, maintaining optimum working conditions through ...