IAEA ma used machines

Electric motor, three-phase motor -Manufacturer: IAEA, electric motor type MA 19C120 -4A -Power: 0.75 kW -Speed: 1380 rpm -Shaft: Ø 19 x 40 mm -Construction: B14 -Protection class: IP44 -Dimensions: 285/167/H200 mm -Weight: 14.3 kg

Electric motor, three-phase motor -Manufacturer: IAEA, electric motor type MA 80-19F165 -4 -Power: 0.55kW -Speed: 1395 rpm -Shaft: Ø 19 x 40 mm -Type: B3/B5 -Dimensions: 280/200/H215 mm -Weight: 15.7 kg

Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1395 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 44 -Number: 2x available -Price: per piece -Dimensions: 280/165/H205 mm -Weight: 13 kg

electric motor, three-phase motor -Power: 0.55 kW -Speed: 1395 rpm -Shaft diameter: 19 mm -Design: B5 -Protection class: IP 44 -Quantity: 3 available -Price: per piece -Dimensions: 280/199/H205 mm -Weight: 15 kg

Three-phase motor, electric motor -Power: 7.5 kW -Speed: 2880 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 3x available -Dimensions: 430/260/H310 mm -Weight: 56.2 kg

Filter control valve, switching valve, maintenance unit, water separator -Manufacturer: Festo, Maintenance unit LFR-D-Maxi / HE-D-Maxi -Connection: 1/2 -Quantity: 16 pieces available Price: per piece -Dimensions: 220 x 270 x 90 mm / 280/270/130 mm -Weight: 2.5 kg/pc.

Can Filling Line 1500 cph with CASK mACS filler and ELF labeller Complete can filling line from the can shaker to rotating buffer table all delivered by Canadian CASK in year 2022 suitable for beer, kombucha, cider, tee and other drinks. Can shaker is semiautomatic and requires forklift for lifting can pallet after very layer of cans. Once the layer is on the shaker, cans will flow down with gravity to ricer and finally to inlet screw of CASK mACS can filling station. This CASK mACS Micro Canning System features a three-head filling station. Its inline fill-head control technology integrates fill-level sensors with proprietary foam-control valves, enabling precise and independent control of each fill head. The system includes CO₂ pre-purge using a piston-style purge mechanism that fully evacuates oxygen from the can prior to filling, helping ensure product quality and improved ...

Folding machine KRAMER type A-toll. II 1000Fabr. No. 48 287 Year of construction 1990Useful length 1060 mmmax. Sheet thickness 3.75 mmStroke of the upper beam 180 mmAdjustability of the bending beam 60 mmBack gauge 480 mmDrive power of bending beam drive 4 kWAdrive power of upper beam drive 1.5 kWNet connection 400 volts, 50 Hz- manual and semi-automatic control- angle adjustment via angle selector- one-piece pointed rail 135- back gauge with hand crank adjustment and simple measurement scale-

<br>SOS block bottom bag machine TRIUMPH III, Windm Ller + H Lscher, with lower patch unit, 2-ply, photocell, several former plates and aisle, option: 4-color printer for final cleaning<br><br>br>

Kurbelwellen,Zylinderköpfe,Motorblöcke,Pleuelstangen DB,MAN Deutz,Perkins,Volvo,Scania,MWM,Sisu-Valmet, geschliffen+Rißprüfung, überholt ab Lager sofort lieferbar. info@miw-zeven.de

Tip height 120 mm, grinding length 1000 mm, 8 spindle speeds 55 - 600 rpm, spindle head holder MK 3, table sash. infinitely adjustable, table swivel 7 each, delivery by hand or automatically, grinding wheel-dm. max 400 mm, Grinding wheel width approx. 60 mm, tailstock holder MK 2, connection value approx. 3.5 kW, automatic working cycle, express speed 30 mm, automatic. Piercing loops. The machine is functional and does not require a geometric revision. Accessories on request!

New plastic handles for drawers, tool cabinets, etc. 380 pieces. Partially original packaged. Price reduced VS €/piece

1 factory-tested, well preserved two girder magnet overhead travelling crane with helical wire-stabilized trolleys for magnetic-beam operation Load approx. 2 x 3.200 kg = 6.400 kg Wingspan approx. 18,720 mm Hook way about 10,000 mm Make chairs / DEMAG Year of production / workshop testing 1991/2016 FEM 3 M Hubklasse H 3 Beanspruchungsgruppe B 5 Crane equipped with 2 movable separately and together, inclined cable stabilized DEMAG double girder trolleys with 2 elevators, radio control, magnetic control and shape steel magnetic system with 2 groups of â 2 magnets to the transport of long material and concrete steel Working speeds: Hoist around 2.1/12.6 m / min Cross travel approx. 10.0/40.0 m / min Crane drive approx. 0-80.0 m / min

4 pieces used leveling shoes L =37 cm x W = 22 cm set height as on the pictures is 10cm, the leveling shoes have at the top a approx. 20mm and at the bottom a approx. 7mm plastic support,

Hünnebeck Manto 330 â?¢ Strong connection can be implemented by directional angle: 40 m ² of shell surface in a crane excavation without additional stiffening â?¢ highest bending strength due to the 14 cm high steel frame; Permitted concrete print 80 kN/m ² â?¢ rational shelling of large areas without compensation and with few anchoring points using MANTO XXL panels â?¢ Light and fast â?? or shelling of shafts with the MANTO chess corner â?¢ consistently good concrete image due to fire galvanizing of the frame and high-quality shakheads â?¢ Also suitable for shells finely skinned walls. 132m ²-EUR 19,969,60 Stocked: Table/Panel 90 x 330 â?? 20 Stk/pcs. Table/Panel 75 x 330 â?? 20 Stk/pcs. Inner corner/ash Inner Corner 35/330 â?? 6 Stk/ ...

SOS Block bottom bag machine TRIUMPH III, Windm�ller + H�lscher, with bottom patch unit, 2 plies, photo cell, several former plates and gears, option: 4 colour tail end printer

: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 125 Engine type: 1130-1190 Year of construction: 1992 Power: 125 m ³/h Speed: 1000 rpm KW: 2.7

Bühler in Flowbalancer donor MAZF 15 (5 piece) 220 volt, 50 heart, Masch.Nr.: 544647 / 10 254 200 now available Mob. + 491715213204

New machines: Chocolate tank, dissolving agitators, Temperature control machines, chocolate pumps. Various sizes and services, stainless steel, very good quality. We are a sales and service partner for MASSA in German-speaking countries.

1 factory-tested double girder overhead travelling crane Payload 10.000 kg Wingspan currently and possible about 11,500 mm Hook path Max approx. 8,000 mm Make ABUS/Demag Workshop examination 2016 with separate DEMAG two-rail wind plant trolley &amp;amp; single-sided catwalk Working speeds: Hoist 2-tier Trolley gear 2-speed Crane chassis 2-speed

Laminating rollers Billhöfer Model 102 & 104 series and maybe others Year 2005 Qty available 1 set Available Direct

Chiron FZ18W rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 7100 RPM / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor machine can be inspected under power in our warhouse 6 ton 3,6 x 2,25 x 2,85

3D CNC Router T-Rex 1215 / Technical Data : Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all exis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 12.000 mm/min Operating speed max. ca. 8.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table 1860 x 1340 mm Travels: X=1500mm; Y=1200mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions wi ...

CHIRON MODEL FZ18W MAGNUM 4 axisVertical machining center with rotopallet and double 4th axis20 TOOLSISO 40Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kWX = 625Y = 400Z = 400Rapids 40m/minTable area: 2 x 900 x 470- TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos.- original HAWE hydraulic unit - FANUC 0m be inspected under power in our warehouse.Mimu Machine tools Italy

; NEW