IEMCA boss used machines

- Guide channel (oil-damped) - Max. bar length 3,200 mm - Included guide channel: D 21mm - Material slide length L - Centering - Synchronous device - last attached to long-turning automat - Weight approx. 800 kg - Dimensions LxWxH 4,000x700x1,200 mm

was connected to Gildemeister GMC 20

Spindle circle 165 mm Interface Gildemeister GM 16 AC

IEMCA model 33 lathe bar loader

Rod diameter 65 mm rod length 3200 mm

- For connection to multi-spindle automatic lathes - Stocking: Area magazine 4x 450 mm edition - Rod Ø: 4-52 mm (depending on the guide channel) - Ø guide channel: 44 mm - Rod length: approx. 3000-4200 mm - Dimensions LxWxH: 4600 x 750 x 1300 mm - Weight: approx. 850 kg

Stock number: 3765 BAR FEEDER - LOADING MAGAZINE Manufacturer: IEMCA, Type: VIP 80 II - 16 Machine NO.: 0207370a01, Year of construction: 2007 Specifications: Max. Stang dia. 80 mm Min. Stang dia. 5 mm Stang length 1400 mm Length: 1900 mm, Height: 1500 mm, Width: 1000 mm, Weight: 520 kg

27 own barfeeds in stock or on arrival (Iemca-Lns-Top Automazioni) visit our website and ask for more details

Key data: 4200 mm, 25 mm, 25 mm

Bar feeder for multi-spindle lathe 8 spindles last attached to Gildemeister AS 16 / AS 20 Ø pitch circle 180 mm Guide channels 9/ 11/ 13/ 15/ 17/ 19/ 21 mm

Inv. Num. : 7836 Type: A26 Speedy Producer: IEMCA Created: 2016 Parameters: Side length: 3000 mm Length: 2370 mm Width: 1105 mm Height: 1890 mm Weight: 1850 kg Equipment: Automatic feeder SMART 320

Loader applicable to all types of CNC lathes, with fixed or sliding head. The TS560 series automatic loaders are characterized by a very silent operation and a large capacity bar magazine. They can be connected to automatic and CNC lathes, with fixed and sliding headstock, and to any machine working the bar (transfer, cutting-off machines, presses, etc.) even with special profiles; they are particularly suitable where large quantities are required. The TS 560 P loaders are equipped with a magazine with 4 eclipsable overlapping shelves (max. Capacity 1800 mm.), L max [mm]: 3.300

Was fitted on a Gildemeister Sprint 65

Inv. Num. : 8916 Type: Maxis 62N Producer: IEMCA Created: 2007 Parameters: Maximum rod length: 3485 mm Rod diameter: 9-62 mm Weight: 770 kg

A Iemca loader and an ILS unloader are available. 1) Iemca VIP80-E short bar loader, material passage: 80mm, bar length range: 210mm-1615mm, max. magazine load capacity: 250kg, magazine width: 650mm, feed rate: 1200mm/s, machine dimensions X/Y/Z: approx. 2300mm/1200mm/1400mm, weight: approx. 550kg. 2) Irco ILS-Rex 7208 workpiece unloader, year of manufacture: 2008, max. workpiece diameter: 80mm, workpiece length range: 100mm-800mm. Documentation available. An on-site inspection is possible.

An automatic bar feeder with bundle magazine for multi-spindle automatic lathes is available. Round material diameter range: 4mm-45mm, square material side length range: 4mm-36mm, max. bar length: 4200mm, working height range: 1030mm-1430mm, max. bar weight: approx. 90kg. Machine dimensions X/Y/Z: approx. 4600mm/1100mm/1300mm, weight: approx. 1400kg. Documentation available. An on-site inspection is possible. Expected to be available from the end of September 2026.

it was fitted to Biglia B620 (with spindle length of 1150 mm) - 71 mm guide channels - 70,5 mm bar pusher - 9 bushings (6-20-26-28-32-42-46-52-58 mm)

previously attached to Gildemeister TWIN 65 max. bar length 3,300 mm Material Slide Length XLL max. slide outlet 1,670 mm (with shortest intermediate tube) Capacity: Multi-surface magazine 4x400 mm (1600 mm contact surface) incl. guide channels Ø 46 + 66 mm

previously attached to Gildemeister TWIN 65 max. bar length 3,300 mm Material Slide Length XLL max. slide outlet 1,670 mm (with shortest intermediate tube) Capacity: Multi-surface magazine 4x400 mm (1600 mm contact surface) incl. guide channels Ø 46 + 66 mm

Key data: 3 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 90 liter container (painted) Performance data Volume flow 330 l/min Operating pressure max. 10 bar Nominal power motor 3.0 kW Number of cylinders 2 Compressor stage(s) 1 Installation data Ambient conditions min. / max. 0 / 40 °C Sound level 79 dB(A) Voltage / Phases / Frequency 400/3/50 V / Ph / Hz Dimensions and weight Length x width x height 1065 x 615 x 1000 mm Weight 89 kg Compressed air outlet coupling Capacity compressed air tank 90 lt

Key data: 4 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 270 litre container (painted) Performance data Volume flow 504 l/min Operating pressure max. 10 bar Nominal power motor 4.0 kW Installation data Ambient conditions min. / max. 0 / 40 °C Sound level 79 dB(A) Voltage / Phases / Frequency 400/3/50 V / Ph / Hz Dimensions and weight Length x width x height 1940 x 820 x 1600 mm Weight 150 kg Compressed air outlet coupling Capacity compressed air tank 270 lt

Nominal lifting capacity: 5000kg Center of gravity distance: 600mm Total lifting height: 3.3m Engine: FORD Transmission: Grazziano

Auction-ID: A7-48382-27

Used NEGRI BOSSI 700T injection molding machine - Year 2009Technical Specifications & Performance DataThis Negri Bossi injection molding machine delivers high-output performance in the 700-ton clamping class, ideal for producing technical plastic parts and PET preforms that feed downstream used bottling line and industrial packaging operations. Built in 2009, it combines robust Italian engineering with a versatile injection unit and advanced controls for demanding, continuous-duty manufacturing environments common in beverage production supply chains.Manufacturer: Negri BossiModel: VECTOR 7000 H 6500Year: 2009Working hours: 69500Clamping class: 700-ton classScrew diameter: 110 mmShot volume: 4750 cm³Shot weight: 4320 gMaximum injection pressure: 1670 barCore pulling: 4 (2 + 2)Robot interface: YesAir circuits: 4Ejection stroke: 350 mmOpening stroke: 1000 mmMould height (min–max): 400� ...