JAKOBSEN sj used machines

grinding length: 650 mm grinding width: 450 mm workpiece height: 325 mm table-size: 600x350 mm grinding wheel diameter: 350 mm weight of the machine ca.: 2.7 t Magnetic table 600x400mm Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 650 mm grinding width: 300 mm max distance spindle center to table surface: 550 mm cross travel: 310 mm longitudinal feed: 700 mm weight of the machine ca.: 1.8 t dimensions of the machine ca.: 3.0 x 1.87 x 1.9 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- Digital read out system position slides - 5 stones and flanches - Coolant and Filtration system - CE Mark - Levelling pads included  - Full set off books 

control: FANUC Power Mate hydraulic: . grinding length: 800 mm grinding width: 400 mm distance spindle center to table: 650 mm table speed -stepless-: 30 m/min grinding wheel size: 350 x 50 x 127 mm weight of the machine ca.: 3.5 t dimensions of the machine ca.: 3.3 x 2.3 x 2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle taper: MK 3 total power requirement: 4 kW weight of the machine ca.: 0,620 t Center bore grinding machine - 160 x 1000 LO - small/ large drilling/grinding length: 50/ 1000 mm - Spindle holder: MK 3 - small/ large workpiece diameter: 6/ 160 mm - Grinding head in spindle hole: 125 mm - Oscillation size: 0 to 5 mm - Oscillation double strokes: 125 / min - Speeds: 55/ 110 rpm - Connected load: 4 kW - Weight: 620 kg specification: motor. Material rotation oscillation Switch cabinet The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Infinite Technologies & Robotics Model: SJ2020R0C0001-MP05 Year of Manufacture: 2020 Name of Machine : G2Y Clips Mounting Machine Voltage: 380V Current: 8A Power: 4 kW Weight: 3 Tons Certification: CE marked Find more here - / Contact us at -

Screw Diameter: 92 mm // Throughput: 800 kg/h

Meat mincer grinder Completely made of stainless steel Dimensions: 415x705x930mm Electric power:1.8 kW Voltage: 220V/50Hz Capacity: 750 kg/h

Meat mincer grinder Completely made of stainless steel Dimensions: 460×520×860 mm Electric power: 1.8 kW Voltage: 220V / 50Hz Capacity: 750 kg/h

Gear motor, electric motor, three-phase motor -Speed: 2.3 rpm -Power: 0.04 kW -Construction: B5 angle -Diameter shaft: 18 mm -Protection class: IP 54/65 -Dimensions: 320/160/H150 mm -Weight: 9 kg

Medium: HCFC/HFC 2, max. operating temperature: 32bar, min. temperature: -40°C, max. temperature: 120°C, coil volume: 11.6l, weight: approx. 65kg. Documentation available. An on-site inspection is possible.

Frequency converter, frequency converter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, servo drive, drive controller -Manufacturer: Hitachi, frequency converter Drive Controller Combivert -Type: SJ200-005NFE2 -Power: 0.55 kW -Number: 1x frequency converter available -Dimensions: 120/80/H130 mm -Weight: 0.8 kg

Offered is a conventional cylindrical grinding machine. Set to ZRO 40.10, protection class: IP54/IP32, control system: Erfurt electronic. Equipped with integrated control cabinet, workpiece feed system, separate control panel, coolant system. Weight: approx. 380kg, overall dimensions X/Y/Z: approx. 2500mm/1800mm/2000mm. Inspection possible by arrangement.

weight max. in kg: 226 kg work height max.: 12000 mm weight: 6532 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

* General * SKU260Y295 * MakeHosokawa Micron * Serial4140702000 * Pressure * Working pressure0.2 Bar * Working pressure jacket3 Bar * Technical specs * Max. temperature200 °C * Main Features * MaterialStainless steel * Volume380 Ltr. * Motor15 KW * Specified Features - Paddle dryer * Paddle dryercheck * Continuouscheck * Capacity380 l./ 603kg/h * Trough sizesDia. 400x3000 mm * InletDia. 205 mm * Manholecheck * OutletDia. 205 mm * With jacketcheck * Shaft can be heated37l. , 1,3bar * Max. temperature10-200°C * Motor15kW, 400V, 720 rpm. * Speed mixing shaft520 rpm. * MaterialStainless steel 1.4306 (304L) * With jacketcheck * General * TypeSJS 400-3.00 * Year of construction2004 * LocationBarneveld * Floorspace4,5x1,5 m * Total height1 m * Weight5700 kg * Extra SpecificationsPaddle dryer comes with gas-heated oil heater and oil pumps with valves:Brand: Ness Wärmetechnik GmbHType: WE 200Y ...

A very well-maintained Forte horizontal band saw is available. Round cutting capacity: 320mm, max. square cutting capacity: 300mm/300mm, saw blade dimensions X/Y/Z: 3660mm/25mm/0.9mm, band speed: 100m/min, max. material feed: 400mm, max. feed length: 4000mm. Machine dimensions X/Y/Z: approx. 1950mm/1500mm/1250mm, weight: approx. 1000kg. Including roller conveyor. The machine was used in a training workshop and is in good condition. Including five bandsaws. Documentation vorhanden. An on-site inspection is possible.

Auction-ID: A1-48420-5

6-colour format: 720 mm<br>TYP: 500, 6 INTAGLIO + 1 FLEXO, PAPIER & FOLIEN 50-150 GSM, ROLLS of 800 MM WIDTH: 750 MM;<br><br>Still in operation: Yes<br>Verf Gbar: immediately

6-colour format: 900 MM<br>ROTOPAK 1/S, 50-200 G, WEB WIDE: 820 MM, ROLLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

<br>DECOIL DURCHMESSER: 1000 MM, AUFWICKLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6-colour format: 900 MM<br>ROTOPAK 1/S, 50-200 G, WEB WIDE: 820 MM, ROLLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Complete system installed in 1997 - still in production - Avantra 44S with 3600 dpi - Online Rapiline for Avantra44 - Collecting basket, cable, everything with The whole system was under maintenance contract, is complete tested and cleaned Available: in production

<br>AGFA APIS-Board Rev. A5. For AccuSet 800 / 1000 and Avantra 25<br><br><br>br>Verf Gbar: now

R23801/12 JAGENBERG Roller cutter Model: Vari Major Built: 1974 Width: 3,800 mm Materials: - coated paper, glossy and matte, grammage from 50 to 250 g/m2. max. speed: 1,500 m/min. for paper 250 g/m2 (The speed depends on the quality and grammage of the paper.) max. unwinding diameter: 2,500 mm max. winding diameter: 1,525 mm min. cutting width: 100 mm Number of upper knives: 6 Winder: 5 Single Winder max. roll width: 1,730 mm min. roll width: 450 mm max. unwinding diameter: 1,525 mm min. unwinding diameter: 300 mm 600 mm max. roll weight: 35 kN Available: immediately

<br>AGFA APIS-Board Rev. B2. For all AccuSets (800/1000/1500 normal & plus) and all Avantras (20/25/30/36/44-E/S/XT)<br><br><br>br>Verf Gbar: now