13 JUNG flat grinding machines used machines

Key data: 500 mm, 200 mm

Automatic grinding wheel feeding, automatic transverse adjustment, Table longitudinal movement hydraulically or manually, wet grinding device, electromagnetic clamping plate, Accessories Grinding length: 500 mm Grinding width: 200 mm max. workpiece height: 250 mm Speed 2800 rpm Clamping surface: 600 x 200 mm Total power requirement: 3.7 kW Machine weight approx.: 1,6 t Operating instructions with circuit diagrams Machine can be demonstrated

gr. grinding length: 300 mm large grinding width: 150 mm Table movement - longitudinal movement: 2 - 20 m/min Grinding wheel speeds: 3000 rpm electr. Power supply: 380 V, 1.1 kW Dimensions: 1500 x 1100 x 1750 mm Weight: 920 kg

Inv. Num. : 4518 Type: JA 500 A Producer: JUNG Created: 1994 Parameters: Control system: Siemens Operating hours: 10662 h Maximum grinding height of the workpiece: 375 mm Maximum spindle speed: 4200 1/min Minimum travel speed longitudinally (X-axis): 24 m/min Maximum travel speed longitudinally (X-axis): 24 m/min Grinding wheel diameter new: 250 mm Spindle power: 7.5 kW Maximum grinding length without grinding wheel extension (X-axis): 600 mm Maximum sanding length: 200 mm Machine height: 1000 mm Machine length: 3700 mm Machine width: 2100 mm Machine weight: 2,500 kg

Grinding length: 600 mm Grinding width: 200 mm Clamping surface of the table: 600 x 200 mm Greatest distance between table and grinding spindle center: 500 mm Grinding wheel dimensions: 250 x 25 x 51 mm Table longitudinal feed hydraulically infinitely variable: 1 - 24 m/min Table transverse feed per hand rotation: 4 mm Grinding spindle speed infinitely variable via DC drive: 800 - 4200 rpm DC drive: 1.5 - 5.0 kW Net weight with control cabinet approx.: 2000 kg Approx. space requirement: 3100 x 1700 x 1900 mm

Key data: 400 mm, 150 mm

Year of manufacture 1983 Grinding length 400 mm Grinding width 150 mm Installation height 400 mm Table load 75 kg All feeds are infinitely variable Drive power 1.5 kw Automatic delivery Magnetic Plate 400 x 150 mm Puller Wet grinding device Machine is in good condition

Inv. Num. : 6614 Type: - Producer: JUNG Generated: Parameters: Equipment: DRO In good technical condition.

JUNG D22 / Internal Cylindrical Grinding Machine -Machine suitable for inner round + surface grinding -Smallest grindable bore 14mm -Largest grindable bore 150mm -Grinding length without face grinding device 250mm -Grinding length with face grinding device -6x workpiece speeds 46-270 rpm -Spindle box right/left swivel 30 degrees -Distance of the spindle axis over the center of the table 250mm -Largest workpiece spindle/grinding support distance 935mm -Spindle box / inclined position 30 degrees each -Work table / tilt forward/backward 5 degrees each -Hand/automatic operation -Taper grinding device -Bezel -Three-jaw chuck -Replacement grinding spindles

Key data: 600 mm, 250 mm

Surface Grinding Machine Jung JF520 +Supromatic Built in 1979 The machine was completely overhauled in 1999 Grinding length: 600 mm Grinding width: 250 mm Operating hours: 15000 h Good condition

Used 4 flanges fit on a JUNG, HF 50 (R or RD) Scope according to pictures ! ( 4 flanges , . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Tool grinding machine Jungner US-2305 Table: 1020 x 114 mm, clamping surface: 625 x 114 mm Distance between centers: 305 mm Work piece diameter: 225 mm Travels: -X: 350 mm -Y: 90 mm Spindle motor: 0,55 kW Spindle speed: 3400 / 5000 / 6700 rpm

BN 102 C Producer Tos Swing 280 mm Distance between centres 630 mm Cross table adjustment 250 mm Longitudinal table adjustment 510 mm Vertical milling head adjustment 290 mm Machine weight 1000 kg

Make: YOUNG Type: JF 520 Year of construction 1992 Machine weight : 2200Kg Total weight: 2600kg Location : Haiger Price: 24.000 € excl. VAT. Description: Digital display, Fabr. Heidenhain, microprocessor control, profiling device, Fabr. Diaform, Machine Lighting, Coolant System, Sine Magnetic Clamping Table, Fabr. Jung, type SM 50 Specifications: Clamping surface (L x W in mm) 600 x 200 Grindable surface (L x W in mm) 600 x 250 Magnet size max. mm 600 x 200 Grinding wheel dimensions max. mm 225 x 25 x 51 Distance table/spindle center mm 350 (+50) Table longitudinal feed pendulum m/min 1 – 20 Creep gear mm/min 0 – 500 Grinding spindle drive speed rpm 800 – 4200 Power kW (w/creep gear) 2.2 (3.5)

Universal surface grinding machine of the Jung brand suitable for tooling, fixture construction, training and mould making Bssx7D8P Travel distances : 400 x 150mm Table size : 520x150mm Grinding length 400mm Grinding width 150mm Workpiece height 240mm Table size 520x200mm Connection 50Hz 380V Motor 4.5KW Machine weight approx. 2250kg Dimensions 2500x2100x1900mm

dimensions of the machine ca.: 380 x 200 x 134 mm weight of the machine ca.: 24 kg power requirement: - kW baseplate-clamping range: 110 x 70 mm workpiece sizes: max. 56 x 70 x 25 mm profile depth: max. 15 mm angular adjustment: 0-2 ° Condition: unused: Electrik 24 Volt: Unused unit in a wooden box. Clamping: permanent-magnetic, to use on a table of a grinding machine for grinding pieces with angle. Detailed describtion see attached PDF. doc. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sanding length: 500mm, sanding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, sanding wheel diameter: 225mm, sanding wheel width: 25mm, sanding wheel bore: 51mm, speed: 4200rpm, machine weight: approx. 2500kg. On-site inspection is possible.

Table dimensions X/Y: 600mm/200mm, grinding dimensions X/Y: 600mm/250mm, magnet dimensions X/Y: 600mm/200mm, grinding wheel diameter: 225mm, grinding wheel width: 25mm, grinding wheel bore: 51mm, spindle center-to-table distance: 350mm (+/-50mm), table feed: 20m/min, creep speed: 0mm/500mm/min, speed: 4200rpm, machine dimensions X/Y/Z: approx. 2700mm/2100mm/2100mm, weight: approx. 2500kg. On-site inspection is possible.

Bore: 50mm, grinding depth: 80mm, spindle axis-table center distance: 145mm, grinding wheel holder: 540mm, taper: Morse 4, workpiece spindle bore: 28mm, workpiece spindle swivel: 10°/30°, grinding spindle swivel: 130mm, grinding spindle transverse movement: 30mm, table longitudinal movement: 4mm/80mm, cooling pump capacity: 140l/min. Machine dimensions X/Y/Z: approx. 2100mm/1000mm/1400mm, weight: approx. 1600kg. Including accessories and calibration measuring device. The machine was overhauled in 2002. Documentation available. On-site inspection is possible.

A CNC surface grinding machine Jung, overhauled in 2003, is available. Grinding length: 500mm, grinding width: 200mm, max. workpiece height: 250mm, table dimensions X/Y: 600mm/200mm, grinding wheel dimensions X/Y/Z: 225mm/25mm/51mm, speed: 4200rpm, weight: approx. 2500kg, operating hours: approx. 16602h. Documentation available. An on-site inspection is possible.

grinding length: 400 / 500 / 600 mm grinding width: 200 / 300 mm workpiece height: 300 / 350 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: - m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A total of three cylindrical grinding machines and one internal cylindrical grinding machine are available. 1/2) Two identical cylindrical grinding machines SMW AGL 125/5PC, year of manufacture: approx. 1970, center height: 160mm, max. workpiece width: 63mm, max. workpiece diameter: 180mm, speed: 1000rpm, machine dimensions X/Y/Z: approx. 2800mm/2800mm/2400mm, weight: approx. 5500kg. 3) Cylindrical grinding machine Fortuna RSE300/II, max. grinding wheel diameter: 300mm, grinding length: 600mm, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1550mm, weight: approx. 2000kg. 4) Internal cylindrical grinding machine Jung D14 MP7z, grindable bore: 8mm-10mm, max. grinding depth: 150mm, swing diameter: 450mm, workpiece spindle bore: 35mm, max. swiveling range: 30°, machine dimensions X/Y/Z: approx. 2700mm/1300mm/1700mm, weight: approx. 2500kg. An on-site inspection is possible. Individual sale ...

Manufacturer: Jung, Model: JF 520 Year of Manufacture: 1979 Machine Type : Grinding Machine Electrical Specifications - Voltage: 380 V - Phases: 3 - Frequency: 50 Hz - Nominal current: 30 A - Supply fuses: 35 A - Control voltage: 220 V Find more here - / Contact us at -

Grinding dimensions X/Y: 600mm/305mm, max. workpiece height: 350mm, feed rate X: 24m/min, feed rate Y/Z: 2m/min, machine dimensions X/Y/Z: approx. 3000mm/2700mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The control has a circuit board defect. Documentation vorhanden. An inspection on site is possible.

Surface grinding machine, grinding machine -hydraulic horizontal surface grinding machine -Magnetic plate: 300 x 150 mm -Grinding wheel motor: 1.1 kW 2800 rpm -Water cooling with: filter -Grinding disc diameter: 200 mm -Transport dimensions: 1470/1170/H1920 mm -Weight: 1090 kg

Cylindrical grinding machine, external cylindrical grinding machine, internal cylindrical grinding machine, centering grinding machine, center grinding machine -Max. shaft diameter: 320 mm -Max. grinding length: 345 mm -Chuck size: Ø 133 mm -Dimensions: 1925/1135/H1755 mm -Weight: 1592 kg -functionally tested