KAMA ts used machines

Current stock: approx. 965 pcs. Included in delivery are: 01x castor, used Manufacturer: Kama Material Color Roll: Red Material color frame: sendz. galvanized Specifications: Total height: approx. 155 mm Rolls Ø: approx. 125 mm Roll width: approx. 34 mm Bearings: Needle bearings Roll Material: Rubber Plate abbreviation: approx. 105 x 80 mm (WxD) Hole Ø: approx. 9 x 17 mm ( Oval ) Number of holes: 4 pcs Screw hole removal: approx. 80 x 55 mm (middle - middle hole) Weight / pcs.: approx. 0.970 kg General information about the article: This item is offered for pickup only. A desired transport beyond that or a dispatch of this article is associated with additional costs, which separately depending on the place of delivery or scope of delivery can be queried from us.

Polygraph kama folding glue machine with 3 points format 104

1 x folder gluer Kama ProFold 74 Basic : * PLC with 8 control channels (Omron), colour touch panel * Hotmelt system with 4 channels, 2 nozzles * Job Planner Software * Suction belt feeder – Top loader * Transport module with rollers (280 cm long, approx.. 110”) and patented grid system for tool attachment * Delivery unit with pressing roller (180 cm long, approx. 40”) * 1 set pressure rollers (2x11wheels, 4x6, 2x3, 1x3s, 2x1) * 14 pcs cross-beams, 28 pcs tool-fasteners * 1 tipper fold plate including 2 blowing nozzles * 1 pair of short plough fold devices with pneumatic flap for short flaps * 1 pair of long plough fold devices incl. a pair of folding blades * 6 pcs guide wires with special holders 1 x folding & gluing edition : set of pressure rollers (1x7s wheels, 2x6, 2x3, 1x3sil, 2x1sil), 4 pcs cross-breams, 8 pcs, tool-fasteners, alignment aid for cardboard 1 x se ...

In Stockroom at the warehouse in Blomberg! The KR BM 600 is a profile spraying machine of the latest Kama generation. The machine is equipped with a wide cabin, a conveyor belt transport system with paint recovery and belt washer system. Automatic loading and unloading systems are available as an option. SPRAY ARMS, PART DETECTION 4 spray arms, adjustable in height, inclination and angle, are installed as standard. adjustable in height, inclination and angle. On these arms the 4 spraying can be used. By means of part recognition at the inlet of the spraying machine the individual spray guns are controlled. Optionally, additional guns and pumps can be installed or a version with a double booth can be selected. CONVEYOR AND BELT CLEANING SYSTEM WITH PAINT RECOVERY SYSTEM The paint that is sprayed onto the 600mm wide polyolefin conveyor belt is automatically squeegeed off and can be reus ...

refurp-up in 2007 Spare parts Still in operation: Yes Available: immediately

overhauled in 2007 spare parts Still in operation: Yes Available: sofort

740 x 1,050 mm max. / 330 x 480 min. Size MABEG Scale Layer Flatbed die-cutter Punching force 1.8 MN / approx. 182 t HFS Hot Foil System Feeder stack 115 cm Display stack 85 cm Total meter approx. 12 million

KAMAZ 53213 (KO-505A) Box: Cistern Color: orange Motor: 10850 cm³ Motor power: 154 kW Top: Diesel Dimensions Length 8300 mm Width 2500 mm Height 2830 mm Trek - Masses Gross Weight 20500 kg Registration weight 20500 kg Empty weight 10140 kg Load capacity 10360 kg

CNC SCREEN PRINTING MACHINE Balsfulland CNC 1500 H Manufacturer: Werner Kamann Model: CNC 1500 H Year of manufacture: 2008 Design: Fully enclosed safety cabinet with protective glazing Machine type: Multi-color CNC screen printing system CE certified: Yes Details: CNC-controlled axes Multi-color printing stations Automatic product transport system Fully enclosed safety housing Integrated drying / curing unit Designed for industrial serial production Heavy-duty steel / aluminum frame construction Application: Cosmetic containers Brochure stand Glass bottles Plastic packaging Cylindrical or slightly tapered products Industrial packaging components

The Straw Applicator TSA Tubex 9001 is one of the save application solutions. Heavy structure and a speed up to 7500 units/h are ideal for the use with a TBA 19 Filler. The speed can be set variously.

Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.

1 of used tray-/padshrinkpacker, make KHS Kisters, type Innopack TSP 80 V with 180-degree (clockwise) curve and shrinktunnel, new 2004. Machine has an 8-lane infeed and is capable of producing trays (and/or) pads either single lane (i.e. 24 cans/bottles per tray/pad) or dual-lane (i.e. 12 cans/bottles per tray/pad) in shrinkwrap film (print-registered), at a maximum capacity of 80 cycles (i.e. 80/160 trays) per minute. Operating direction: from right to left as seen from operator\s station. With Allen Bradley Control Logix PLC / Panel View 1000, Indramat servo drives, ITW Quattro hot-melt unit. Both packer and shrinktunnel easily adjustable via servo\s and spindles for various formats as well as single-/dual-lane. Wired for 480V/60Hz. Various manuals available. Equipment in excellent condition!

Dynamic airflow separator (sifter) for minerals, cement, recycling etc., rotor diameter: 700 mm, turbine wheel occupied with 64 blades / turbine blades, outer ring occupied with 36 manually adjustable counter wings, incl. drive. In very good condition.

TS 1000-1 Decker swashaway machine as good as new without warranty - Modular and expandable modular system - Dustproof and safe to work - Internal screen frames - Stable design - Easy disassembly and cleaning of all components - Ready for connection and ready for operation - Conical floor for the discharge of the fine material - Drive via motors with ATEX protection zone 22 (Default) - German operating instructions (other languages at extra charge) Size (mm) 1000 Screen area (m2) 0.77 Fault diameter (mm) 1620 Drive power (kW) 1.5 Weight (kg) 657-816 1 deck (total height mm) 1211 Screening machine for screening in 2 fractions. All product-touched parts are blasted from VA 1.4301 (standard) and glass beads. Seals screen frames made of NBR material (standard). Hood with inlet diameter 150 mm all sieve decks with outlet diameter 100 mm. Machines in standard coating  ...

Swashscreen machine TS 1400-1 Decker as good as new without warranty - Modular and expandable modular system - Dustproof and safe to work - Internal screen frames - Stable design - Easy disassembly and cleaning of all components - Ready for connection and ready for operation - Conical floor for the discharge of the fine material - Drive via motors with ATEX protection zone 22 (Default) - German operating instructions (other languages at extra charge) Size (mm) 1400 Screen area (m2) 1.46 Fault diameter (mm) 2235 Drive power (kW) 2.2 Weight (kg) 1267-1521 1 deck (total height mm) 1373 Screening machine for screening in 2 fractions. All product-touched parts are blasted from VA 1.4301 (standard) and glass beads. Seals screen frames made of NBR material (standard). Hood with inlet diameter 150 mm all sieve decks with outlet diameter 100 mm. Machines in standard coat ...

Working width: 4100 mm sheet thickness: 16 mm projection: 300 mm rear gauge: 1500 mm power: 400 V, 45 kW space: 4800 x 3500 x 2600 mm weight: 28000 kg

ECO TS10 Deflashing Machine Year 1991 +/-

Working width: 3050 mm sheet thickness: 6 mm throat depth: 200 mm rear gauge: 1000 mm power: 15 kW space: 4100 x 2300 x 2100 mm weight: 8500 kg well-preserved CNC hydraulic shear, with pivoting Panel, serial control. CYBELEC, CNC 1000, Hours of operation according to the operating hour counter: 2700 h

“Wolfking” mixer-grinder Type TSMIG 1250/200 twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid suitable for cooling with N2 or Co2

Board repair line with double end profiling line in top condition !! Workpiece parameters of the plates: Min.: 900 mm x 200 mm Weight min. : 17 mm Max .: 5000 mm x 1250 mm Max. Weight: 60 mm Weight: max. 150 kg < Accuracy: +/- 0.2 mm The portals have a max. Clock power of: max. 6 cycles / min The max. Partial performance: 18 parts / min (DEP line) Year of construction 2008 Condition: good (Original price of the line 2008 Euro 4.9 million) Consisting of: * Feeding station with feeding rollers, * Automatic vacuum lifting table for lengths up to 6 m * Conveyor systems * Repair line 1 * Turning station * Transfer service * Repair line 2 * automatic vacuum lifter for stacking (6m) * Stacking roller conveyor * Control cabinet with machine control * Profilfraessanlage * Stacking Tables; very well

release agent spray unit Electr. connection: 400 V 3-ph, 16 A Compressed-air connection:6 bar, oil-free Working pressure:0,1-0,5 bar renovated

Manufacturer: Weinbrenner Type: TSV 6 / 3050 Year of constr.: End of 2015 demonstration machine Cutting length: 3050 mm Cutting capacity: 6 mm (steel) Hours of operation: 54 Control: Cybelec DNC 60 Dimensions L/W/H: 4100/2050/2100 mm Table height: 1000 mm Weight: 8500 kg Min. cutting angle: 1° Cutting angle max.: 2.5 ° Stroke rate minimum: 20 min. Max speed: 25 min. Cutting gap adjustment: motorized Cutting angle adjustment: hydraulic Number of holders: 14 Rear velocity range: 1000 mm Security: setting the photocell safety on the front and back Oil filling: 225 l Electrical power: 15 KW Power consumption: 3 x 400 V / 50 Hz Back-up fuse: 50 A Additional equipment: Extension of the side stop on 2050 mm Side stop side swing-away A total of 8 support arms freely movable along the entire length of the table The machine is a demonstration  ...

all stainless steel twin shaft paddle mixer suitable for vacuum suitable for cooling capacity ± 1.500 L loading height ± 2.000 mm discharging height ± 750 mm double lid at the top 2 discharge guards dimensions : ± 2.300 x 2.000 x 2.400 mm

PVC - heating / cooling mixing combination Hot mixer 750 ltr. / Cooling mixer 2,500 l. Engine power: 212 + 45 kW

Hand cabinets for gate saws Tsa