3 KASTO hacksaw automatics used machines

Hydr. Hacksaw, hacksaw, lifting saw KASTO type PSB WBS 210 / 230Masch. No. 115 106 1212 / 72783 Year of construction 1986Sawing area - Round 250 mmSawing area - Square 225 x 225 mmSawing area - Rectangle 260 x 100 mmCutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mmMotor power 1.4 and 1.8 kW pole-switchableMains connection 380 volts, 50 Hz- only for 90 cuts, no mitre adjustment- Saw motor with 2 speeds and 3 V-belt steps- Hydraulic saw bar feed- hydraulic

: 370 mm rund : ja : möglich The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: Ø 340 / 340*290 mm band length: 600 * 52 * 2,5 mm cutting lenght max.: x * 600 mm total power requirement: 6 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,5*2,5*1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: Ø 340 / 340*290 mm band length: 600 * 52 * 2,5 mm cutting lenght max.: x * 600 mm total power requirement: 6 kW weight of the machine ca.: 2 t dimensions of the machine ca.: 2,5*2,5*1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydr. Hacksaw KASTO HBS 210 / 240Masch. No. 1116 145 220 Year of construction 1994Saw range at 90 round 210 mmflat 240 x 190 mmsquare 210 x 210 mmat 45 round 150 mmSaw blade length 400 mmStroke rates 62 / 125 strokes per min. Material support height: 500 mmMotor power: 0.5 / 0.75 kWNerg connection: 400 volts, 50 Hz- Drive motor with 2 speeds- Coolant pump in the machine baseSpace required: L x W x H: 1200 x 500 x 1200 mmWeight: 170 kgGood condition; used

cutting diameter:260 mm band length:450 x 4 x2 mm total power requirement:22,6 kW weight of the machine ca.:1024 kg dimensions of the machine ca.:1500 x 2310 x 955 mm square:240 x 240 mm flat material:260 x 180 clamping capacity:40 bar Documents:vorhanden

Horizontal Band Saw Machine Fabr. KASTO Type HBA 340 AU Specifications: Cutting range 90° round 340 mm Cutting area 90° flat 340 x 380 mm Saw blade length 5334 x 32 x 1.06 mm Table height 700 mm Feed length 600 mm Multiple feed 1800 mm infinitely variable cutting speed 20 - 130 m/min. Drive power 6.5 kW External dimensions L x W x H approx. 2200 x 2600 x 2000 mm Weight approx. 2.1 t with-chip conveyor used, in good condition All information to the best of our knowledge but without guarantee until the order confirmation The machine can be demonstrated at the site near Aachen.

Key data: 400 mm, 180 mm

Max. diameter or cutting width 180 mm, smallest dimension to be sawn D 10 mm, automatic feed 600 mm, max. feed length several times 1800 mm, minimum offcut length for single cut 20 mm, minimum remnant length in automatic operation 110 mm, Table turning area for mitre cutting 135 degrees, Total drive power 3.2 kW, Weight without roller tracks 1100 kg, coolant system, the saw is still electrified, Function video available, Operating manual with circuit diagrams and spare parts lists.

range L-W-H: 400x300x200 mm saw diameter: 420 mm weight of the machine ca.: 3500 kg Producer: KASTO Type: HBA 420U Year of manufacture: 1985 Dimensions (width x height x depth): approx. 400x200x300 cm At7Zcq Fully automatic NC horizontal bandsaw 1 chip conveyor, 1 external chip conveyor, 1 person. driven roller conveyor approx. 450 cm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine type: Automatic band saw - Horizontal Manufacturer KASTO Type KastoTwin A4 Year of construction 2002 Country of origin Germany Delivery time by arrangement Freight base from location Technical details Cutting diameter 400mm Saw blade length 5,090mm Cutting width 1.3mm Cutting range at 90 degrees: around 400mm Cutting area at 90 degrees: square 400 x 400mm Smallest diameter 10mm Smallest section length 6mm Feed length 750mm Cutting speed 20 - 110m/min Clamping pressure 20 - 60bar Saw blade dimensions 5,090 x 41 x 1.3mm Total power requirement 7.0kW Machine weight approx. 1850 kg Space requirements approx. 2400 x 2500 x 1700mm

range L-W-H: 3,50/2,40/2,20 mm weight of the machine ca.: 3500 kg Producer: KASTO, Type: HBA 420 AU, C93I8De Year of production: 1995 Fully automatic NC horizontal band saw with hydraulic clamping device up to 400 mm, 1 chip conveyor, 1 external chip conveyor, 1 roller conveyor, 1 roller conveyor, hydraulic drive, motor switched off, Dimensions (width x height x depth): approx. 400x200x350 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 460 mm saw band length: 5334 mm cutting width: 1,3 mm cutting range - square -: 320 x 320 mm cutting range - flat -: 500 x 320 mm control: minipos 807 cutting speed: 16 - 80 m/min dimensions of saw-band: 5334 x 41 x 1,3 mm feed length: 580 mm feed length: multiple: 5800 mm total power requirement: 8 kW weight of the machine ca.: 3,5 t dimensions of machine L x W x H: 2,7 x 2,95 x 2,15 m Accessories: roller track 4150 mm length, roller track 2150 mm length, bundle clamping device, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 15 - 560 mm : 560 x 630 mm dimensions of saw-band: 7.400 x 54 x 1,60 mm Control: KASTO material feed - single: 900 mm multiple feeding length: max. 9.999 mm cutting length min.: 6,00 mm sawing motor: 5,50 kW cutting speed: 13 - 127 m/min height of material-table: 700 mm total power requirement: 12,00 kW weight of the machine ca.: 6,00 t dimensions of the machine ca.: 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control, frequency-controlled saw band drive, chip conveyor, infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m, Machine can be inspected under power. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 520 mm saw band length: 7239 mm cutting width: 1,3 mm Control: POSIMOD cutting range - square -: 520 x 520 mm feed length: 500 mm feed length: multiple: 4500 mm min. cut-off length: 6 mm length of rest piece min/max: 10 / 100 mm cutting speed: 20 - 130 m/min dimensions of saw-band: 7239 x 50 x 1,3 mm sawing motor: 5,5 kW total power requirement: 10,0 kW weight of the machine ca.: 3,8 t dimensions of machine L x W x H: 3,42 x 2,30 x 2,40 m - 2 column guided - Accessories: roller track 2500 mm length, chip conveyor, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1060 mm

Band saw Kasto HBA 10×12 built in 2007 Cutting areas: Cutting range around 1,060 mm Square cutting area 1,060 x 1,060 mm Cutting area flat 1,060 x 1,260 mm Clamping range 300 – 1,260 mm Smallest dimension to be sawn approx. Ø 300 mm Smallest section length 10 mm Minimum offcut length single cut 20 mm Minimum off-piece length automatic operation 100 mm Table load maximum 50to Travel table 6100mm Total drive power 20 kW Saw motor 11 kW Continuous cutting speed at 50 and 60 Hz 12 – 90 m/min Automatic feed length single 2,100 mm Clamping force machine vise 50,000 N Saw blade dimensions 11,430 x 80 x 1.6 mm Cutting feed: infinitely variable Material feed: hydraulic Material tension: hydraulic Saw blade guide: carbide, replaceable Saw blade tension: hydraulic Saw blade cleaning: by easily replaceable brush, motor-driven ...

cutting diameter: 280 mm saw band length: 4930 mm capacity 90 degrees: square: 280 x 280 mm capacity 45 degrees: round: 280 mm capacity 45 degrees: square: 280 x 280 mm capacity 60 degrees: round: 220 mm capacity 60 degrees: square: 200 x 200 mm feed length: 600 mm feed length: multiple: 5400 mm cutting speed: 17 - 90 m/min length of rest piece min/max: min. 30 mm saw diameter: min. 10 mm control: KASTO, Compact Control total power requirement: 5 kW weight of the machine ca.: 1,75 t dimensions of machine L x W x H: 2,68 x 2,54 x 1,59 m Accessories: coolant, roller track 3300 mm length, 300 mm width, roller track 1350 mm length, 300 mm width The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 320 mm saw band length: 6300 mm cutting range: 420 x 320 mm control: Siemens Simatic HMI cutting speed: 20 - 130 m/min height of material-table: 950 mm total power requirement: 15 kW weight of the machine ca.: 2920 kg dimensions of the machine ca.: 6,35 x 6,76 x 2,41 m Machine overhauled by Kasto in 2016 Equipment/accessories: - Cutting feed continuously adjustable - Pneumatic connection 6 bar - Coolant 75 l - Pump capacity 40 l - Roller conveyor - Chip conveyor - Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 430 mm

Fully automatic band saw machine Manufacturer : Kasto Type: Twin A4 Bauahr: 2010 Condition: gebraucht / used Location : Warehouse Sweden Technical data Cutting range: Cutting range around 430 mm Cutting area square H x W 430 x 430 mm Cutting area flat H x W 430 x 430 mm Clamping range 0 – 430 mm Smallest dimension to be sawn: 10 x 10 mm Smallest section length 6 mm Shortest residual piece length in automatic mode (only possible for geometrically flawless surfaces) 35 mm Shortest offcut length in single cut 10 mm Dimensions and weights: Length approx. 2,140 mm Width incl. chip conveyor 4,610 mm Height (saw frame lowered) approx. 2,195 mm Height (saw frame in maximum position) approx. 2,410 mm Material support height 700 mm Coolant: Coolant tank volume 150 l, Pump capacity at 3 m head 25 l/min Paintwork: Machine light grey RAL 7035 textured paint Saw  ...

saw band length: 2910 x 27 x 0,90 mm Control: Kasto CompactControll capacity 90 degrees: round: 260 mm capacity 90 degrees: flat: 300 x 260 mm capacity 90 degrees: square: 260 x 260 mm capacity 45 degrees: round: 200 mm capacity 60 degrees: round: 165 mm cutting speed: 20-110 m/min min. dia.: 10 mm Cutting Length min.: 6 mm total power requirement: 2,5 kW weight of the machine ca.: 0,86 t dimensions of the machine ca.: 1,8 x 1,8 x 1,7 m Fully automatic band saw (CNC) Includes right-hand roller conveyor with programmable stop carriage & digital display: Stop positioning is handled by the integrated measuring system, with the position shown to millimeter precision on the separate display. Dimensions (L x W x H): 2.70 x 1.10 x 1.70 m. Max. measuring length: 2.30 m. Includes hydraulic clamping and feed unit Includes coolant system Includes work light Includes small parts and spare parts Inc ...

Overhauled: 2018 Year of construction: 1985-2017 Saw band 275-315 mm Engine power 11.0 KW Cutting speed 225-1200 m / min Square maximum working range: 15-80 mm Round maximum working range: 15-90 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine) about: 1000 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 5500mm x 1400mm x 1600mm The machine is suitable facilities and construction for mass editing of non-ferrous metals and is the predecessor of KASTOwa M9 KASTOspeed M9. The saw line is currently in preliminary line status and can be visited only in original condition without function. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Amon ...

Overhauled: 2018 Year of construction: 1991-20167 Band saw blade 250-285 mm Motor output 5.5 KW Cutting speed 35-160 m / min Square maximum working range: 15-60 mm Round maximum working range: 15-70 mm Saw feed 2-100 mm / s adjustable Section length 5-250 mm Nachschubgeschw. Max. 1000 mm / s (Saw) approximate weight: 1500 kg (Magazine), approx.: 800 kg Dimensions Lxwxh (saw) approx.: 1100 x 1600mm x 2300mm (Magazine) about: 7500mm x 1400mm x 1600mm The machine is suitable due to their facilities and construction for mass editing of steel and is the predecessor of KASTOwa C7 or C9 KASTOspeed. The plant will be located after overhaul (retrofit) in like new condition, which is also guaranteed by our House. The machine will be overhauled on request in our House. Among other things, following points are renewed: -New PLC control Siemens S7 -Conversion to Siemens HMI - ...

Metal Circular Saw Cold Circular Saw Manufacturer Kasto Type GKS400P YOC 1998 Saw blade 400mm coming from below automatic hydraulic vice for material expansion Top condition, ready for immediate use.

Specifications Tower storage system for sheet metal Manufacturer: KASTO Type: UNITOWER B3.0 Year of construction: 2008 Number of magazines: 49 Pull-out trolley on rail

Hacksaw Kasto BSM 403

Alternativ Saw KASTO PSB 280 U Blades dimensions: 450 mm x 40 mm x thickness 2 mm Cutting capacity in the round: 280 mm Square cutting capacity: 240 x 240 mm Rectangular cutting capacity: 280 x 160 mm Cutting capacity at 45°: 170 mm Automatic descent 2 speeds rotation Swivel jaws from 0 to 45° Jaws length : 350 mm x Height 150 mm Maxi jaws opening: 310 mm Lubricant pump Voltage: 380 V Dimensions (L x W x H): 1800 x 800 x 1300 mm Weight: approx 1 T