6 KEMMERICH decoilers used machines

sheet width - max.: 350 mm coil weight: 1 t coil internal dia.: 360-475 mm weight of the machine ca.: 500 kg dimensions of the machine ca.: BxTxH 1500x1500x1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 250 mm coil weight: 250 kg coil internal dia.: Ø 290-550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 250 mm coil weight: 150 kg coil internal dia.: 300-500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 250 mm coil weight: 150 kg coil internal dia.: 290-550 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 300 mm coil weight: 150 kg coil internal dia.: 200-520 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0240 mm coil weight: 0,150 t coil internal dia.: 320 - 520 mm coil outside - diam. ca.: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m • Motor drive • Rear limit disc • Front limit ring • Switch-on delay adjustable via potentiometer • Manually adjustable brake • Loop control via contact switch on the reel base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width - max.: 0240 mm coil weight: 0,150 t coil internal dia.: 320 - 520 mm coil outside - diam. ca.: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m • Motor drive • Rear limit disc • Front limit ring • Switch-on delay adjustable via potentiometer • Manually adjustable brake • Loop control via contact switch on the reel base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Kemmerich Model: VD 3000 UF-SH-520-S Type of Machine: Double Decoiling Reel / Uncoiler Year of Manufacture: 1999 Technical Specifications: - Band width: 100 to 520 mm - Band thickness: 0.5 to 2.5 mm - Maximum coil weight: 3,000 kg - Spreading range diameter: 470 to 520 mm - Maximum coil outer diameter: 1,600 mm - Maximum band speed: 25 metres per minute - Reel crown rotation speed: 1 to 15 rpm - Drive power: 2.6 kW - Connection voltage: 480 V AC, 60 Hz - Rated current: 16 A - Control voltage: 24 V DC - Cross shaft height: approximately 1,250 mm - Maximum load capacity per nameplate: 3,000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

Technical data: -Weight of coil: to 3. -Strip width: 600 mm -hydr. Spreading -2,2 kW geared motor with controller 380 V, 50 Hz. -Loop control arm start-stop -Electrical cabinet forward / backward / stop -Steel segments -Expansion 475-525 mm -Speed 0-25 m / min. Coil outer diameter. 1500 mm

Technical data: -Coil weight: 3.000 kg -Strip width: 1,000 mm -hydr. Spreading -2,2 kW geared motor with controller 380 V, 50 Hz. -Loop control arm start-stop -Electrical cabinet forward / backward / stop -Steel segments -Expansion 475-525 mm -Speed 0-25 m / min. -Coil outer diameter. 1500 mm

• Bandwidth / strip width: 1,600 mm • Strip thickness / strip thickness: 0.4 - 2.0 mm • Coil inner / coil inner-a:390-420 mm • Coil outer / coil outer-a: 1,500 mm • Spreading/ spreading: hydraulic/hydraulic • Motor drive AC servo cooling • For invertrers • Speed: 15 m/min. • Attachment segments for 500 mm • Reel shift: 200 mm • Working method: from top and bottom • Hydraulic valves on board

Load capacity - 1000 kg Outer diameter - max. 1200 mm Spreading range 550 - 750 mm Bandwidth max. 350 mm Spreading process - manual Reel drive - three-phase motor 400 V / 50 Hz Unwindspeed max. 30 m / min

Key data: 300 , 1 , 1300

Payload 1000 - 1250 kg Band width 305 and 505 mm Spreading range - 375 -520 mm Coil outer diameter 1300 mm without cabinet and control

Coil inner diameter 460 - 560 mm Coil outer diameter. Max. - 1500 mm Bandwidth - 350 mm Payload 2 t without drive, adjustable. Disc brake btto - 640 kg more info on request

Key data: 400 , 1 , 470

YOC 2009 Payload 1500 kg Coil inner diameter from 470 - 630 mm Coil outer diameter. 1600 mm Speed 12 rpm Frequency Dimensions - cca 1.7 x 1.4 x 1.7 m Btto - 850 kg More info on request

Key data: 450 , 1 , 1400

Payload 1200 kg Width 450 mm Coil external diameter - up to 1400 mm Motor 1.5 kW Speed adjustable by frequency conversion Btto 500 kg

Key data: 1000 mm, 1 t

for one-sided loading and unloading, with large stop plate and brake Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Coil weight: 1000 kg Machine Number: 308 Colour: blue/yellow Machine weight approx.: 350 kg Dimensions: 800 x 1800 x 1400 mm Coil width: 1000 mm Clamping range: up to 510 mm Load capacity in kg :1000 kg

material width: 0380/460 mm coil weight: 1,00 t coil internal dia.: 340 - 440 mm coil outside dia.: 1100 mm expansion: mechanisch total power requirement: 1,50 kW weight of the machine ca.: 0,500 t dimensions of the machine ca.: 1,40 x 1,10 x 1,40 m with bundle attachment arms at the back, sheet width 380 mm without bundle attachment arms, sheet width 460 mm hand crank 3 bundle attachment arms right-left rotation tape scanning via proximity switch (start-stop) with time delay speed control via handwheel 4-22 rpm mechanical brake The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 300 mm, 500 t, 350 mm

Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy.

sheet width: 300 mm coil weight: 1 t coil internal dia.: 350-450 mm weight of the machine ca.: 0,5 t dimensions of the machine ca.: BxTxH 1500x1500x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm coil weight: 2x 500 kg coil internal dia.: Ø 300-540 mm coil outside dia.: Ø 1000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 125 mm coil weight: 2x 0,8 t coil internal dia.: 300-500 mm coil outside dia.: 1200 mm weight of the machine ca.: 0,7 t dimensions of the machine ca.: BxTxH 2000x2000x1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm coil weight: 1 t coil internal dia.: 375-550 mm coil outside dia.: 1600 mm weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1500x1500x1900 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 300 mm coil weight: 0,5 t coil internal dia.: 480-530 mm coil outside dia.: 1200 mm weight of the machine ca.: 0,3 t dimensions of the machine ca.: BxTxH 1200x1200x1500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IRON SA 25000 ENC sheet metal decoiler was built in 2025 in Italy by Iron Srl. The machine, designed to automate production, has been equipped with state-of-the-art technology, which ensures the highest precision in decoiling coil strip. These include a worm gear reducer with overload clutch, an epicyclical reducer and four self-centring clamps with hydraulic expansion. The machine is controlled by a inverter and feedback encoder, which in turn enables controlled electrical braking. All this is complemented by a sturdy construction made of top-quality steel. The offered IRON 25 t sheet metal uncoiler is brand new and unused. The price also includes a CST coil lift table for easy loading of the coil directly onto the machine arm. The IRON SA 25000 ENC self-centring decoiler is part of the RNM coil strip handling line. The system is customisable and can be equipped with devices such  ...