KIHEUNG kmb used machines

x-travel: 4000 mm y-travel: 1350 mm z-travel: (Vert.) 1600 mm Control: Heidenhain iTNC 530 table surface area: 4200 x 1150 mm table load: 13 t tool taper: ISO 50 spindle turning speed - stepless: 0 - 3000 U/min transmission ratio: 2 spindle motor: 28/38 kW feed range: 5000 mm/min rapid traverse: (X/Y) 12 m/min rapid traverse: (Z) 10 m/min weight of the machine ca.: 37 t dimensions of the machine ca.: 12,9 x 6,53 x 3,79 m January 2025: The milling head was overhauled (new bevel gears and bearings). Costs 38.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation The ...

Inv. Num. : 3901 Type: COMBI-U7 Producer: KIHEUNG Created: 2016 Parameters: Control system: HEIDENHAIN TNC 620 Switch-on hours: 2590 h Hours: 2389 h Work table length: 1800 mm Work table width: 700 mm Maximum table load (uniform): 3000 kg Number of axes: 3 pieces Tool magazine: 24 pieces Maximum vertical spindle speed: 4000 1/min X-axis travel: 1600 mm Y-axis travel: 750 mm Z-axis travel: 900 mm Cone: ISO 50 Motor power: 20/30 kW Working feed: 10000 mm/s Number of T-slots in the table: 5 pieces Machine weight: 13 t Equipment: Swivel head (90°) Swivel head cycles through the program 90 degrees horizontally or vertically to the left or right

x-travel: 1900 mm y-travel: 800 mm z-travel: 800 mm Control: control: 426 Heidenhain : dismantled: total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1600 mm, 710 mm, 700 mm

HEIDENHAIN TNC 124 Travel X-axis Travel X-axis 1600 mm Travel Y-axis Travel Y-axis 710 mm Travel Z-axis Travel Z-axis 700 mm Height table to vertical spindle 50 – 750 mm Height table to horizontal spindle 60 – 760 mm Working table Working table 2200 x 550 mm Table load 3000 kg Drive power AC milling motor Main motor power AC 11 kw Tool taper ISO 50 Spindle speeds stepless 40 – 1600 rpm Feeds x,y feeds x;Y 2000 mm/min Rapid feed x,y, 5000 mm/min Feed Z Feed Z 1000 mm/min Rapid traverse Z Rapid feed Z 2500 mm/min Machine weight approx. Machine weight approx. 8000 kg Equipment Electronic handwheel / elctronical hand-wheel HEIDENHAIN Table enclosure Hydraulic tool clamping Universal milling head Coolant system Bodenwanne / floor-pan Documentation Additional /additional Completely new replacement gearbox from spare parts stock Completely new gea ...

x-travel: 1600 mm y-travel: 710 mm z-travel: 700 mm Control: HEIDENHAIN, TNC 124 table surface area: 2200 x 550 mm spindle taper: SK 50 DIN 69871 spindle turning speed - stepless: 40 - 1600 U/min spindle drive: 11 kW feed X/Y/Z-axis: 2000/2000/1000 mm/min. rapid traverse X/Y/Z axis: 5000/5000/2500 mm/min feed motor: 3 kW distance table / vertical spindle: 50 - 750 mm distance table/horizontal spindle: 60 - 760 mm table load: max. 3000 kg total power requirement: 15 kW weight of the machine ca.: 8 t dimensions of machine L x W x H: 3,50 x 2,82 x 2,70 m Accessories: Univ.-milling head with hydr. tool clamping, electron. handwheel, table housing, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Bed Milling Machine KIHEUNG U1050 Control: Heidenhain iTNC 530 Year of Make: 2014 Internal machine no. 61 X-axis: 2,500 mm Y-axis: 1,050 mm Z-axis: 1,600 mm Tool holder: SK50 DIN ISO Tool magazine: 24-fold Facilities - Chip conveyors - Magnetic clamping plate - Handwheel HR410

This 5-axis KIHEUNG RIGITRAX X 8000 was manufactured in 2011. It features an impressive X-axis travel of 8000 mm, Y-axis travel of 1350 mm, and Z-axis travel of 2000 mm. The machine is equipped with a powerful 28 kW spindle motor and a 40-fold tool changer for efficient operations. If you are looking to get high-quality milling capabilities, consider the KIHEUNG RIGITRAX X 8000 bed type milling machine we have for sale. Contact us for further details.

x-travel:3600 mm y-travel:1250 mm z-travel:1600 mm table load capacity:8000 kp table clamping surface::4100 x 1050 feed range:10 - 5000 mm/min rapid traverse feeds:10000 mm/min spindle motor:29 kW spindle taper::ISO 50 spindle turning speed range:5 - 4000 U/min total power requirement:70 kW weight of the machine ca.:28 t dimensions of the machine ca.:8,5 x 5,4 x 3,2 m Machine with Heidenhain TNC 430 Steuerung - tool changer 30-fold - milling head indexable 2,5° - 4. axis turn table

Electric motor, three-phase motor -Power: 0.52 kW -Speed: 2785 rpm -Shaft diameter: 14 mm -Construction: B3 -Protection class: IP 56 -Dimensions: 205/125/H175 mm -Weight: 8 kg

Geared motor, electric motor, electric geared motor -Speed: 259 rpm -Power: 0.55 kW -Design: B3 -Shaft diameter: 32 mm -Protection class: IP 55 -Weight: 30 kg

Brake for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, multi-disc spring-loaded brake, multi-disc spring-loaded brake -Manufacturer: Stromag, fluid-switched multi-plate spring-loaded brake from the GSL aerial work platform -Bolt circle: Ø 160 mm M14 -Dimensions: see photos -universally applicable -Number: 2x brakes available -Price per piece -Dimensions: 220/190/H190 mm -Weight: 19kg/pcs

Gear motor, electric motor, electric gear motor, adjustable gear motor, variable speed gear motor -Manufacturer: Lenze, adjustable geared motor with brake -Gearbox: Type GST04-2K VBR 071-12 10B i= 45 -Adjustment gear: KMB-1100366 75 - 14 rpm -Spring-loaded brake: BFK458-08-N 8 Nm -Engine: Type MDERABR 071-12 0.25 kW / 1400 rpm -Shaft: Ø 20 x 40 mm -Design: B3 -Dimensions: 410/280/H205mm -Weight: 17.8 kg

Geared motor, electric motor, electric geared motor -Speed: 77 rpm -Power: 0.55 kW -Design: Angle gear -Brake -Shaft diameter: 19 mm -Protection class: IP 54 -Weight: 22 kg

Brake for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, multi-disc spring-applied brake, multi-disc spring-applied brake -Manufacturer: Stromag, hydraulic disc spring-applied brake -Output shaft conical: Ø 45 - 40 mm -Input shaft bore: Ø3 2 mm -universally applicable -Number: 2 brakes available -Price: per piece -Dimensions: 220/190 mm -Weight: 16 kg/piece

6-colour format: 720 mm<br>TYP: 500, 6 INTAGLIO + 1 FLEXO, PAPIER & FOLIEN 50-150 GSM, ROLLS of 800 MM WIDTH: 750 MM;<br><br>Still in operation: Yes<br>Verf Gbar: immediately

6-colour format: 900 MM<br>ROTOPAK 1/S, 50-200 G, WEB WIDE: 820 MM, ROLLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

<br>DECOIL DURCHMESSER: 1000 MM, AUFWICKLER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6-colour format: 900 MM<br>ROTOPAK 1/S, 50-200 G, WEB WIDE: 820 MM, ROLLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Complete system installed in 1997 - still in production - Avantra 44S with 3600 dpi - Online Rapiline for Avantra44 - Collecting basket, cable, everything with The whole system was under maintenance contract, is complete tested and cleaned Available: in production

<br>AGFA APIS-Board Rev. A5. For AccuSet 800 / 1000 and Avantra 25<br><br><br>br>Verf Gbar: now

R23801/12 JAGENBERG Roller cutter Model: Vari Major Built: 1974 Width: 3,800 mm Materials: - coated paper, glossy and matte, grammage from 50 to 250 g/m2. max. speed: 1,500 m/min. for paper 250 g/m2 (The speed depends on the quality and grammage of the paper.) max. unwinding diameter: 2,500 mm max. winding diameter: 1,525 mm min. cutting width: 100 mm Number of upper knives: 6 Winder: 5 Single Winder max. roll width: 1,730 mm min. roll width: 450 mm max. unwinding diameter: 1,525 mm min. unwinding diameter: 300 mm 600 mm max. roll weight: 35 kN Available: immediately

<br>AGFA APIS-Board Rev. B2. For all AccuSets (800/1000/1500 normal & plus) and all Avantras (20/25/30/36/44-E/S/XT)<br><br><br>br>Verf Gbar: now

<br>Spinner for Agfa Avantra 44 s - Clompete general&2011 with warranty<br><br>Verf Gbar: now

<br>Conditions for Agfa Avantra 44 - See image<br><br><br>Verf Gbar: now

4-color R23240/17 SHIKI label press Model: PC 45 M Built: 1992 Web width: 280 mm Availability: instantly 3 - coloured or 4 - coloured (optional) Printing width: 270 mm, min. 50 mm max. feed: 7, approx. 180 mm Accessories: Rolling unit for rollers up to 100 cm in diameter Winding unit for small rolls pneumatic remaline hole on both sides Speed: 7000 cycles/h max. Products: Hole edge adhesive labels, adhesive labels, hole edge cardboard labels, tickets with and without printing - can punch, print, embosse, number, perforate, punch Available: immediately