KIHEUNG knc used machines

x-travel: 1900 mm y-travel: 800 mm z-travel: 800 mm Control: control: 426 Heidenhain : dismantled: total power requirement: kW weight of the machine ca.: 12 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:3600 mm y-travel:1250 mm z-travel:1600 mm table load capacity:8000 kp table clamping surface::4100 x 1050 feed range:10 - 5000 mm/min rapid traverse feeds:10000 mm/min spindle motor:29 kW spindle taper::ISO 50 spindle turning speed range:5 - 4000 U/min total power requirement:70 kW weight of the machine ca.:28 t dimensions of the machine ca.:8,5 x 5,4 x 3,2 m Machine with Heidenhain TNC 430 Steuerung - tool changer 30-fold - milling head indexable 2,5° - 4. axis turn table

Inv. Num. : 3901 Type: COMBI-U7 Producer: KIHEUNG Created: 2016 Parameters: Control system: HEIDENHAIN TNC 620 Switch-on hours: 2590 h Hours: 2389 h Work table length: 1800 mm Work table width: 700 mm Maximum table load (uniform): 3000 kg Number of axes: 3 pieces Tool magazine: 24 pieces Maximum vertical spindle speed: 4000 1/min X-axis travel: 1600 mm Y-axis travel: 750 mm Z-axis travel: 900 mm Cone: ISO 50 Motor power: 20/30 kW Working feed: 10000 mm/s Number of T-slots in the table: 5 pieces Machine weight: 13 t Equipment: Swivel head (90°) Swivel head cycles through the program 90 degrees horizontally or vertically to the left or right

Key data: 1600 mm, 710 mm, 700 mm

HEIDENHAIN TNC 124 Travel X-axis Travel X-axis 1600 mm Travel Y-axis Travel Y-axis 710 mm Travel Z-axis Travel Z-axis 700 mm Height table to vertical spindle 50 – 750 mm Height table to horizontal spindle 60 – 760 mm Working table Working table 2200 x 550 mm Table load 3000 kg Drive power AC milling motor Main motor power AC 11 kw Tool taper ISO 50 Spindle speeds stepless 40 – 1600 rpm Feeds x,y feeds x;Y 2000 mm/min Rapid feed x,y, 5000 mm/min Feed Z Feed Z 1000 mm/min Rapid traverse Z Rapid feed Z 2500 mm/min Machine weight approx. Machine weight approx. 8000 kg Equipment Electronic handwheel / elctronical hand-wheel HEIDENHAIN Table enclosure Hydraulic tool clamping Universal milling head Coolant system Bodenwanne / floor-pan Documentation Additional /additional Completely new replacement gearbox from spare parts stock Completely new gea ...

x-travel: 1600 mm y-travel: 710 mm z-travel: 700 mm Control: HEIDENHAIN, TNC 124 table surface area: 2200 x 550 mm spindle taper: SK 50 DIN 69871 spindle turning speed - stepless: 40 - 1600 U/min spindle drive: 11 kW feed X/Y/Z-axis: 2000/2000/1000 mm/min. rapid traverse X/Y/Z axis: 5000/5000/2500 mm/min feed motor: 3 kW distance table / vertical spindle: 50 - 750 mm distance table/horizontal spindle: 60 - 760 mm table load: max. 3000 kg total power requirement: 15 kW weight of the machine ca.: 8 t dimensions of machine L x W x H: 3,50 x 2,82 x 2,70 m Accessories: Univ.-milling head with hydr. tool clamping, electron. handwheel, table housing, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC Bed Milling Machine KIHEUNG U1050 Control: Heidenhain iTNC 530 Year of Make: 2014 Internal machine no. 61 X-axis: 2,500 mm Y-axis: 1,050 mm Z-axis: 1,600 mm Tool holder: SK50 DIN ISO Tool magazine: 24-fold Facilities - Chip conveyors - Magnetic clamping plate - Handwheel HR410

x-travel: 4000 mm y-travel: 1350 mm z-travel: (Vert.) 1600 mm Control: Heidenhain iTNC 530 table surface area: 4200 x 1150 mm table load: 13 t tool taper: ISO 50 spindle turning speed - stepless: 0 - 3000 U/min transmission ratio: 2 spindle motor: 28/38 kW feed range: 5000 mm/min rapid traverse: (X/Y) 12 m/min rapid traverse: (Z) 10 m/min weight of the machine ca.: 37 t dimensions of the machine ca.: 12,9 x 6,53 x 3,79 m In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h A current geometry measurement report is available. * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip ...

Ref. -No.: 10374 Manufacturer: MONFORTS Year of construction: 2000 Type of control: Zyklen gesteuert Control: MONFORTS Control Storage location: Halberstadt Country of origin: Germany

Ref. -No.: 10369 Manufacturer: MONFORTS Year of construction: 2005 Type of control: CNC Control: MTCK/Euro Turn Storage location: Halberstadt X stroke: 450 mm Z - stroke: 3850 mm Centre Distance: 3970 mm Feed Capacity - Z: 20,7 kN Feed Capacity - X: 10,1 kN Rapid Travel Speed X-Axis: 4 m / min Rapid Travel Speed Z-Axis: 5 m / min Tailstock Quill Diameter: 125 mm Tailstock Quill Stroke: 200 mm Circumference diameter over slideway: 830 mm Circumferential diameter over radial slide: 540 mm spindle taper diameter: 140 (Metrisch) mm Quills Morse taper: MK6 Max swing diameter: 900 mm

Ref. -No.: 10366 Manufacturer: MONFORTS Year of construction: 2000 Type of control: CNC Control: EURO TURN Storage location: Halberstadt Country of origin: Deutschland Machine length: 5000 mm Machine width: 1970 mm Machine Height: 1800 mm X stroke: 370 mm Z - stroke: 2880 mm Chuck diameter: 200/250/315 mm Centre Distance: 3040 mm Spindle Head: DIN 55027 - 8x220 Feed Capacity - Z: 18,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 5 m / min Rapid Travel Speed Z-Axis: 10 m / min Circumferential diameter over radial slide: 350 mm Max swing diameter: 720/630 mm travel of the cross slide: 375 mm Spindle head max. passage for violent material: 68 mm Spindle head max. passage for bare material: 70 mm Tailstock outside diameter of the quill: 110 mm Tailstock maximum quill stroke: 210 mm Tailstock inner cone: MK6 Type Further information: Additional lubricating oil tank approx. 6l

Ref. -No.: 10365 Manufacturer: MONFORTS Year of construction: 1997 Type of control: CNC Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Spindle Head: DIN 55027 - 11x290 Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 20 ...

Ref. -No.: 10313 Manufacturer: MONFORTS Year of construction: 2001 Type of control: CNC Control: EUROTURN Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 164 01 Machine length: 6200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 7,7 t X stroke: 450 mm Z - stroke: 3850 mm Chuck diameter: 315/400/500 mm Turning Diameter: 630 mm Turning Length: 3000 mm Centre Distance: 3985 mm Spindle Head: DIN 55027 - 11x290 Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 4 m / min Rapid Travel Speed Z-Axis: 5 m / min Tailstock Quill Diameter: 125 mm Tailstock Quill Stroke: 200 mm Space requirement: 7500 x 3500 mm Circumferential diameter over radial slide: 540 mm mm spindle taper diameter: 140 mm Jaw chuck diameter: 400 mm jaw continuity: 102 mm Quills Morse taper: 6 Max swing diameter: 830 mm travel of the cross slid ...

Control: SIEMENS / MTC K Max.turning length: 1000 mm Max swing diametr over bed: 500 mm Quick Change Toolposts:1 Coolant tank:100l Made in Germany

table length: 4100 mm table width: 1050 mm table height: 1600 mm total power requirement: 29 kW weight of the machine ca.: 28000 t dimensions of the machine ca.: 11X5X3,8 m Marke Kiheung Maschinen-Nr F668 Typ KNC-U1000 CNC-Marke Heidenhain CNC-Typ TNC 426 Baujahr 2002 Tischlänge 4.100 mm Tischbreite 1.050 mm Maximale Tischbelastung 8.000 kg X 3.600 mm Y 1.250 mm Z 1.600 mm Aufnahme BT50 Schnell 10.000 m/min Geschwindigkeit 0 - 4.000 RPM Beweglicher Tisch Huron-Fräskopf CNC gesteuerter Fräskopf Späneförderer Maschinengröße (LxBxH) 11.000 x 5.000 x 3.800 mm Maschinengewicht 28000 kg Magazinplätze: 30 Spindelantriebsmotor: 29 Kw Ausgestattet mit 4. Achse. Tischdurchmesser: 630 mm Ø Belastung: 900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 500 mm turning length: 1500 mm control: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mm spindle bore: 70 mm spindle turning speed range: 3 - 2800 U/min spindle power: 15 kW max. torque on the spindle: 1530 Nm spindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 N rapid travel - longitudinal/face: 10 / 5 m/min bed width: 360 mm travel of cross-slide: 265 mm upper slide travel: 140 mm turning tool - shaft cross cut: 32 x 25 mm tailstock quill diameter: 80 mm tailstock quill stroke: 160 mm tailstock taper MT: 5 total power requirement: kW weight of the machine ca.: 3,3 t dimensions of machine L x W x H: 3,45 x 1,65 x 1,93 m Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8240 Type: KNC 32 Producer: STAR Created: 1990 Parameters: Control System: Fanuc Series O-TT Maximum turning length: 310 mm Max. turning diameter: 32 mm Maximum main spindle power: 8 kW Maximum spindle speed: 6000 1/min Length: 3100 mm Width: 1900 mm Height: 1900 mm Weight: 4000 kg

weight of the machine ca.: 6,6 t control: monforts control : 2 centre distance: 3010 mm centre height: 310 mm tail stock: ja cooling: ja dimensions of the machine ca.: 5000-1600 mmxmmxmm spindle bore: 70 mm : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

* General * SKU171N795 * MakeSeitz Radium * LocationBarneveld * TypeRZ60A6KNC * Pressure * Working pressure6 Bar * Main Features * MaterialStainless steel * Surface5 m2 * Cake28 Ltr. * Specified Features - Horizontal plate filter * Plate filtercheck * Notified bodyTÜV * Filter surface5 m² * Number of platens18 * Platen sizesø 600 mm * Between the plates20 mm * Top connections2x DN25 * Liquid outletø 50 mm * Max. temperature165 °C * Cake capacity28 l. * MaterialStainless steel 1.4401 (316), Stainless steel 1.4571 (316Ti) * General * No.1819 * Year of construction1980 * Mounted on legscheck * Floorspace1,1 x 1,2 m * Total height1,8 m * Weight850 kgFine chemicalsOther chemicalBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesCosmeticsFood additivesAnimal feedSolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicHorizontal plate filte ...

turning length: 2000 mm greates pass round over bed: 630 mm swing diameter over slide rest: 350 mm control: Monforts Control System K bed width: 550 mm turning speed range: 2 - 1800 U/min spindle diameter in front bearing: 120 mm spindle head DIN 55027 - Size: 8 tool taper: RD2 PARAT quill stroke: 210 mm spindle bore: 71 mm total power requirement: 30 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 4,90 x 2,10 x 2,00 m Three-jaw chuck / key bar / Ø250mm Four-jaw chuck 3-jaw chuck for tailstock 4-station tool post head PARAT Fixed steady rest, Ø small Fixed steady rest, Ø large Various chuck jaws, live centers, live centers, tool holders Chip conveyor with coolant pump The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg

Key data: 500 mm, 1000 mm

Circumferential diameter over bed 500 mm, over support 290 mm Center width 1000 mm Speed range 1-3000 1/min, spindle nose bayonet Gr 8 Spindle bore 70 mm Tailstock quill MK 5 / stroke 160 mm incl. Control MTC K, Face Plate Fixed bezel with rolling heads Steel holder head system Multifix C with 1 cassette Coolant Setup

This 3-axis Kitamura KNC 150 NSA was manufactured in 2010. It features a twin spindle configuration with a maximum speed of 5,000 rpm and a spindle power of 7.5 kW. The machine includes an 8-station turret and a part catcher with a conveyor for efficient automation. If you are looking to get high-quality turning capabilities, consider the Kitamura KNC 150 NSA horizontal turning machine we have for sale. Contact us for further details.

turning diameter: 500 mm turning length: 1000 mm control: MONFORTS CONTROL control: SYSTEM EURO TURN turning diameter over bed slide: 290 mm spindle bore: 70 mm spindle turning speed range: 3 - 2800 U/min spindle power: 15 kW max. torque on the spindle: 1530 Nm spindle head: DIN 55027 Gr. 8 feed power X/Z axis: 11300 N rapid travel - longitudinal/face: 10 / 5 m/min bed width: 360 mm travel of cross-slide: 265 mm upper slide travel: 140 mm turning tool - shaft cross cut: 32 x 25 mm tailstock quill diameter: 80 mm tailstock quill stroke: 160 mm tailstock taper MT: 5 total power requirement: kW weight of the machine ca.: 3,1 t Accessories: 3-jaw chuck ROTA-S plus 250 mmø, 4 pos. toolholder PARAT, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS   CNC Teach In Controls MONFORTS MTC-K WORKING RANGE TURNING   swing diameter (max): 500 mm   turning diameter (max): 290 mm   worpiece length max.: 1500 mm MAIN SPINDLE   spindle revolutions (min): 3 /min   spindle revolutions (max): 2800 /min DIMENSIONS / WEIGHTS   space requirements -left/right-: 3325 mm   space requirements -front/back-: 1550 mm   total height: 1740 mm ATTACHMENTS (TURNING)   tailstock: yes   European CE standards: yes

centre height: 255 mm centre distance: 1080 mm turning diameter over bed: 500 mm turning diameter over slide: 290 mm turning length: 1000 mm spindle taper: KK 8 DIN 55027 control: Sinumerik 810 D SIEMENS bed width: 360 mm spindle bore: 70 mm turning speed range: 2 - 2800 U/min rapid travel - longitudinal/face: 10 / 5 m/min quick change toolholder: MULTIFIX Typ B / CAPTO drive capacity - spindle motor: 11,0 kW taper in tailstock-quill: MK 5 dia. of quill: 80 mm quill stroke: 160 mm coolant: voltage: 400 V total power requirement: 16,0 kVA weight of the machine ca.: 3,0 t dimensions of the machine ca.: 2,85 x 1,60 x 1,80 m chip conveyor: 4,00 x 0,40 x 1,50 m - Serial-No.: 346 / 03 - control: SIEMENS Sinumerik 810 D - quick change tool holder MULTIFIX - coolant equipment - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.