8 KINGSLAND used machine for sale

Offer 25455 Hydr . Flat profile and bar steel shears with notching device and hole punch Technical data: - Flat steel shears cut up to 300 x 15 mm - Profile steel shears - Cuts L-steel at 90° to 120 x 12 mm - Steel bar shears - Cuts round steel up to 40 mm - Square steel up to 35 mm - Notching device - with square notch. 100 x 42 x 10 mm - Hole punch - punching force 600 KN - With stop table - Projection 220 mm - Punches in steel up to 28 mm Ø in 15 mm - or 38 mm Ø in 11 mm - various punches + dies, - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

Hydr . Flat profile and bar steel shears with notching device and hole punching Specifications: - Flat steel shears cut up to 375 x 10 mm - 220 x 20 mm - Profile steel shears - cuts L-steel at 90° to 130 x 13 mm - Steel bar shears - cuts round steel up to 45 mm - Square steel up to 45 mm - Notching device - with square notching device 100 x 42 x 10 mm - Hole punch - punching force 600 KN - with stop table - Projection 300 mm - perforated in steel up to 28 mm Ø in 15 mm - or 34 mm Ø in 12 mm - manual length stop - Drive 400 V / 4 kW - Space requirement approx. W 600 x H 1550 x D 1500 mm - Weight approx. 1300 kg

Slaan: - 29 x 15 mm - 34 x 12 mm - 20 x 20 mm - 57 x 8 mm Scheren: - 230 x 20 mm - 375 x 10 mm Hoeksnijden: - 90°: 130 x 13 mm - 45°: 75 x 10 mm Doorsnede snijden: - rond: 45 mm - vierkant: 45 mm - C amp; I profiel: 127 mm Inkepingen: - rechthoekig: 45 x 100 mm Punching pressure: 60 ton Max sheet thickness by punching + nibbling: dia 29 x 15 / dia 57 x 8 mm Max punching dia: dia 160 mm Power needed: 5,5 kW Length: 1640 mm Depth: 710 mm Height: 1780 mm Weight: 1570 kg

ponsdop: diameter 28 x 15 mm / diameter 38 x 11 mm Snijkap: 200 x 20 mm / 300 x 15 mm Hoekafschuifkap: 90° 120 x 120 x 12 mm / 45° 80 x 8 mm Stalen breekijzerkap: diameter 35 / 40 mm Inkepingskap: 100 x 42 x 10 mm Punching pressure: 60 ton Max sheet thickness by punching + nibbling: 28 x 15 mm Max punching dia: 110 mm Power needed: 4 kW Length: 1510 mm Depth: 590 mm Height: 1570 mm Weight: 1440 kg

punching pressure: 45.0 t punch diameter: 22 in 15.0 mm punch diameter: 38 in 8.0 mm round bar steel: 30.0 mm square edge steel: 25.0 L-beam: 100 x 10.0 mm shear: flat material: 300 x 12.0 mm adjustment of stroke: 0 - 55 mm work height max.: 940 / 1140 mm strokes per minute: 34 punch diameter: max. 110 mm voltage: 400 V total power requirement: 4.5 kW weight: 1245 kg dimensions: 1520 x 590 x 1700 mm In good condition () New price ~ 13.000 Euro Special price upon request Features: - Robust electro-hydraulic profile steel shear - With multiple workstations: Punching station Flat steel shear Angle/profile steel shear Notching station - Continuously adjustable stroke - Very compact design - Support table at the notching and punching station - Side support surfaces - 1x freely movable foot switch - Central lubrication system - Connection cable + connector The data for this ad was cre ...

pressure: 40.0 t chamfer lenght: 1600 mm distance between columns: 1100 mm stroke of upper beam: 100 mm throat: 195 mm working feed: 10.0 mm/sec return speed: 70.0 mm/sec : 180 bar work height max.: 840 mm table width: 110 mm dayligth: 295 mm Control: ATL 550 total power requirement: 5.5 kW weight: 2500 kg range L-W-H: 2100 x 1200 x 1800 mm - in checked conditions - machinevideo - https://www.youtube.com/watch?v=cp3ge7VbjTA Equipment: - NC-controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control - model ATL 550 Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1 Y2 axis) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, left front - Electro-motorized backgauge (X axis) with 2x stop fingers, manually adjustable (R Z axis) - Tool holder system A - with top wedge crow ...

Offered is a hydraulic punching machine: Punching force: 100tons (Tm), max. punching cross-section: 2350mm², punching capacity (standard): Ø50mm at 15mm material thickness, punching depth: 500-800mm, incl. special accessories: round punch: max. Ø80mm at 9mm, max. Ø100mm at 7.5mm, square punch: 50mm at 12mm, 60mm at 9.5mm, 70mm at 8mm, rectangular punch: max. 90 x 25mm at 10mm. Inspection possible by appointment.

pressure: 040 t chamfer lenght: 1600 mm distance between columns: 1100 mm stroke of upper beam: 100 mm throat: 195 mm working feed: 10.0 mm/sec return speed: 70.0 mm/sec : 180 bar work height max.: 840 mm table width: 110 mm dayligth: 295 mm Control: ATL 550 total power requirement: 5.5 kW weight: 2500 kg range L-W-H: 2100 x 1200 x 1800 mm Equipment: - NC-controlled hydraulic press brake, with torsion shaft - with ATLANTIC NC control - model ATL 550 Positioning of the backgauge (X axis) Positioning of the depth adjustment (Y1 Y2 axis) Possibility of programming different programs Memory capacity max. 200 programs - max. 400 blocks Swivel control panel, left front - Electro-motorized backgauge (X axis) with 2x stop fingers, manually adjustable (R Z axis) - Tool holder system A - with top wedge crowning - Split insert/bending tools - Lateral safety guards - rear safety guard - 1x fre ...