KLINGELNBERG knc used machines

Circulation cutter from Klingelberg

max. wheel diameter: 0-200 mm max. module: 25 min. module: 0,5 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1600 mm gear width: 250 mm max. module: 20 min. module: 1,5 base circle dia. - max.: 1450 mm base circle dia. - min.: 150 mm specimen weight from/to: 4000 kg feeler adjustment movement - parallel: 1400 mm max.helical angle: 0 - 90 ° wheel diameter with counterstay: 1000 mm feeler adjustment movement - parallel: 800 mm centre height: 1150 mm electrics - voltage/frequency: 400 / 50 V/Hz dimensions of the machine ca.: 2,8 x 2,4 x 2,3 m total power requirement: 2 kW weight of the machine ca.: 3 t Universal Involute and Helix Testing Machine - modernized 1995 Machine is suitable for measuring all individual tooth data on straight and helical spur gears, and shaping and shaving cutters. Following tooth data can be tested: Tooth flanks, Involute base circle dia. and pressure angle, Profile c ...

max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1 Control: 840 C Siemens total power requirement: 100 kW weight of the machine ca.: 16,7 t dimensions of the machine ca.: 5,2 x 2,3 x 2,4 m m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 275 mm gear width: 55 mm max. module: 6 min. module: 1,5 control: Sinumerik 840C tooth width: 5,5 mm spiral angle: 0/60 ° max. number of teeth: 120 min. number of teeth: 5 transmission ratio max.: 1:10 transmission ratio min.: 1:1 spindle speeds: max. 110 mm blade head turning speeds: 20-110 1/min total power requirement: 100 kW weight of the machine ca.: 16700 kg dimensions of the machine ca.: 5200x2300x2400 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: --- mm gear width: --- mm max. module: --- min. module: --- Control: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Klingelnberg ZW 301 Gear Measuring Machine Weight 750 kg

max. wheel diameter: 160 - 1.600 mm gear width: 250 mm max. module: 20 min. module: 1,5 total power requirement: 1 kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 2500 mm gear width: 0 mm max. module: 34 min. module: 1 total power requirement: ca. 15 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 275 mm max. module: 6 min. module: 1,5 Control: SINUMERIK 840 C tooth width: 5,5 mm spiral angle: min. 0 / max. 60 ° max. number of teeth: 120 min. number of teeth: 5 ratio of transmission: 1:10 min. ratio of transmission: 1:1 work piece spindle speed: max. 110 U/min blade head turning speeds: 20 - 110 U/min total power requirement: 100 kW weight of the machine ca.: 16,7 t dimensions of the machine ca.: 5,20 x 2,30 x 2,40 m Internal deburring device U axis / Q spindle chip conveyor coolant device Electrostatic air purifier ELBARON no tools No workpiece clamping device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 500 mm Hypoid adjustment: ±70 mm axial cross angle: 90 ° Distance Y-: 150 - 350 mm Distance Z-axis: 120 - 340 mm turning speed range - stepless: 0 - 5000 U/min max. torque on the spindle: 57 Nm Cone: 99,2 mm Pull-in force Tool clamping: 23000 N Braking torque max.: 93 Nm total connected load: 20 kVA total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,35 x 2,24 x 2,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: mm max. module: Control: total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 600 mm gear width: 450 , 600 mm module: distance gear spindle / pinion head: 40 - 450 mm distance pinion spindel head / gear head: -160 - 600 mm axis adjustment +/-: 60 mm spindle turning speed - stepless: 1 - 2120 U/min spindle bore: 130 mm taper in main spindle: MK 60 total power requirement: 30 kW weight of the machine ca.: 6,6 t dimensions of the machine ca.: 2,8 x 1,8 x 2,1 m Bevel gear testing machine, 2 flank testing! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 300 mm max. module: 8 min. module: 0,7 Control: SINUMERIK 840 D min/max. pitch cone angle: - 90 / + 90 ° workpiece spindle - bore: 127 mm grinding wheel diameter: 50 - 230 mm spindle speeds (infinitely variable): 7.500 U/min work piece spindle speed: 700 U/min total power requirement: 146 kW weight of the machine ca.: 21 t dimensions of the machine ca.: 9,5 x 3,6 x 3,1 m Measuring probefor tooth gap(integrated on the grinding head) External grinding spindle cooling system ELBARON oil mist extraction (integrated in the machine) Hoffmann coolant filter system Was used for the serial production of spiral-toothed ring gears No clamping devices No grinding wheels / grinding wheel flanges No dressing wheels The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 500 mm gear width: 200-400 mm module: 12 turning speeds: 0-3250 U/min bracke pressure: bis max. 95 Nm inner taper: Konus #39 Control: Fanuc 16 total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2.350 x 2.240 x 2.500 mm HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 450

The Klingelnberg PEK 300 H bevel gear testing machine is designed for universal single-flank rolling testing of bevel gears and crown gears. Here, gears can be measured and graphically evaluated by means of single-flank rolling testing. These test methods are particularly suitable for determining defects in the gear geometry such as concentricity and axial running properties, rolling deviations or pitch errors. Here, a practical installation situation of a gear outside the gearbox is simulated under real load conditions and then evaluated. Deviations in the gear geometry, machining errors due to defective tools and damage to the gears can thus be detected and eliminated even before assembly. The following parameters can be measured here: » Single-flank deviations Fi', fi', fl', fk' » Crossing, Runout Roundness (Option) » Carrying diagram with digital camera » Pit ...

Key data: 540

The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies, for the process of noise and contact pattern tests on bevel gears and hypoid gears. Technical data Diameter: 540 (400) mm Hypoid: ±50 mm mm Pinion spindle Dm: 90 mm mm Dimensions: 1,800 x 1,800 x 1,600 m Machine weight: approx. 2,800 kg *Information and data are non-binding, subject to prior sale Special features: The machine is intended for noise and contact pattern tests on bevel and hypoid gears of all gears. By simulating operating conditions, applying different speeds and changing the load states for drive and outlet, the optimal installation distance for standstill can be determined. Digital actual value display for 2 axes Stepless speed adjustment via frequency converter Electrically fused and acceptabl ...

Complete production line for bevel gears, consisting of 6 bevel gear milling machines Klingelnberg BF 201 including orders for contract work for sale.... Technical data Diameter: 240 mm Module: 10 mm Tooth width: 60 mm Dimensions: 2.3 x 2 x 1.7 m Machine weight: approx. 6,700 kg *Information and data are non-binding, subject to prior sale Special features: *Complete production line consisting of 6 machines with the following accessories: - Bevel gear machine - 1x interchangeable gear set - 1x test block - Mounts (proportionate) - Knife set (proportionate) - Documentation (1xOriginal / data set) Furthermore, contract gear orders could follow, catalogue goods and special bevel gear sets according to customer specifications, complete volume approx. 8,000 components / year. Asking price of the seller 18.000.- VB / per machine

voltage: 110 - 230 V frequency range: 50 - 60 Hz Power connection: 0,5 kVA Dimensions (HxWxD): 1000 x 800 x 1750 mm weight: 150 kg Measuring machine for bar knives. Equipment/accessories: -Measuring tools -Clamping devices -Computer -Monitor -Printer -Cabin -Technical documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: mm grinding length: mm max. module: 0 min. module: 0 total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter:5 - 260 mm gear width:400 mm max. module:15 min. module:0,5 gear hobbing diameter - internal:30 mm max. helix angle:> 85 ° Aussenverz. max. helix angle:> 45° Innenverz. Testing Range vertical:400 mm dist. between centers:5 - 600 mm table diameter:260 mm max. table load:100 kg speeds:30 1/min total power requirement:1,6 kVA weight of the machine ca.:900 kg dimensions of the machine ca.:200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.)

turning diameter: 630 mm turning length: 200 mm control: MTC K turning diameter over slide rest: 360 mm turning speeds: 1800 U/min 3-jaw chuck: 315 mm Holder Multifix: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machine Details Warehouse number 1105-03719 Machine type CNC lathe - inclined bed machine Brand KITAMURA Type KNC 250 YS Year of construction 1999 Control type CNC Control Fanuc 18 IT Storage location FRANCE Country of origin JAPAN Delivery time IMMEDIATELY Freight base from stock HAGUENAU FRANCE Technical details Turning diameter 280 mm Turning length 270 mm Control Fanuc 18 IT Rod passage: 42 mm Speed range - spindle 5000 rpm Feed range - turret / infinitely variable 1 - 12000 mm/min Rapid traverses 20 / 24 m/min Number of tool turrets: 1 piece Tool turret - seats: 12 stations Tool holder direct holder Total power requirement 20 kW Machine weight approx. 4.5 t Space requirement approx. 2900x2100x1800 mm Accessories 3 - Baking - Food YES Complete machine documentation YES Chip conveyor YES Parts catcher YES Collet device YES Electronic handwheel YES Co ...

turning diameter: 555 mm turning length: 1500 mm turning diameter over slide: 290 mm 3-jaw-chuck diameter: 315 mm make: Röhn control: Monforts MTCK quick change tool holder: Multifix C steady: turning speeds: 2-2800 U/min transmission ratio: 3 face slide travel: 235 mm spindle passage: 70 mm tailstock quill taper MT: 5 total power requirement: kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,9x1,6x1,8 m About usmore than 400 machines in the warehouse over 12000 m² storage area, crane capacity 70 tmore than 1000 items accessories for your workshopYou want to sell machines production lines or your company, then talk to us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BRAND: MONFORTS YEAR: 1999 MODEL: KNC 5 APPLICATION TYPE: TURNING LOCATION: GERMANY MACHINE TYPE: LATHE AVAILABILITY: IMMEDIATELY Technical Information GENERAL DATA MEASUREMENTS WIDTH: 1550 MM MEASUREMENTS DEPTH: 2830 MM MEASUREMENTS HEIGHT: 1790 MM MACHINE WEIGHT: 3300 KG MAIN DRIVE SPINDLE SPEED RANGE: 2-2800 1/MIN SPINDLE MOTOR POWER: 11-15 KW Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - PEAK WIDTH: 1080/1580 MM - SWING DIAMETER OVER BED: 500 MM - SWING DIAMETER OVER CROSS SLIDE: 290 MM - TRAVEL OF THE CROSS SLIDE: 265 MM - DISPLACEMENT OF THE UPPER SUPPORT: 140 MM - BED WIDTH: 360 MM - WIDTH OF CROSS SLIDE: 220 MM - BED SLIDE GUIDE LENGTH: 615 MM - TURNING TOOL CROSS-SECTION: 32X25 MM