3 KOCH wire drawing machines used machines

One used KOCH cold rolling line Tecnicl datas: Block: 1 Drawing drum diameter: Ø 700mm Usage: Structural steel wires Run-in strength: 400 - 450 N/mm² Inlet diameter: 5.5 mm - 11.5 mm Finished wire diameter: 5.0 mm – 10.0 mm mainly consisting of: - Mecanical descaler, - Driven brush descaling - Wire lubricant application device, - drawing machine KOCH KHZ 5000 - Spooler KHS 1250 and - Control panel and control cabinet

One used KOCH KEG 5000 line with automatic spooler to produce cold rolled wire on spools and coils - Inlet Wire Dia: max. 16.0mm -Final Wire Dia: 5.0 – 14.0mm -drawing capstan: 700 mm dia with hardened steel rings - drive: 160 kW

One used KOCH automatic spooler KSS 1250 for the production of coils up to 3 tons. The machine do have an upgrated electric system, 2 collapsible spools and it is dismantled.

A wire drawing plant is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 6300, year of manufacture: 1992, number of pulls per block: 1, drawing drum diameter: 700mm, pulling force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Sp ...

A wire drawing unit is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 5000, year of manufacture: 1993, number of draws per block: 1, drawing drum diameter: 700mm, drawing force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spo ...

A wire drawing unit is available. 1) Wire rod pay-off, version: 2-fold. 2) Combination unit GSG 840, wire diameter min./max.: 5.5mm/16mm, wire type: wire rod, wire strength: 40-60daN/mm², crushing and bending rolls: Carbide inserts. 3) Dry coating unit BSG/T, filling: calcium stearate, consumption: approx. 350g/wire ton, drawing speed: 15m/s. 4) Cassette with 2 places (1x roll stand, 1x cassette) PKG/T (TS), wire strength: 40-60daN/mm², wire thickness inlet/outlet: 9.5mm/3.5mm-8.5mm, roll diameter min./max.: 115mm/125mm, bore diameter/width: 82mm/15mm-25mm, cooling bolt diameter: 25mm, cooling water consumption: approx. 600l/h. 5) Drawing machine Koch KHZ 5000, year of manufacture: 1993, number of draws per block: 1, drawing drum diameter: 700mm, drawing force: 5000N, wire material: mild steel, running-in strength: 40-45daN/mm², max. drawing range: 5-8.5mm, drawing speed: 7m/s. 6) Spo ...

Key data: 8 mm, 1

Koch Drilling and Dowel Inserting Machine Sprint PTP 3/1800 Working field: 1800mm / 2x 900mm Equipment: 1x horizontal drilling station 0.9 kW, drill speed 7200 rpm Drilling depth 30 mm Drill bit holder 10 mm, total drill length 85 mm 2x glue dispensing and dowel insertion station 2x dowels 10x40mm, dowel protrusion 15-20mm Dowel spacing 96mm 2x vibrating conveyor dowel 10×40 mm 1x Glue pump 18:1 2x electronic glue monitoring ELC Workpiece support table 1700 mm 8x workpiece clamping cylinders Center fence for 4 working areas Central lubrication with hand pump for grease lubrication NC positioning of the height adjustment of the drilling and dowel station (z-axis) Axle with position control, travel speed 12m/min Koch Numeric positioning control with 1 NC axis (X) – with PC, operating system Windows XP Professional: English, 10.4" touch panel – VGA graphics + touchs ...

Manufacturer: Pankoke und Kochsiek, Type: BFA 03, Year: 1988, Drilling supprt from bottom: 3, Groove saw: 1x Horizontal<CRLF>1x Vertikal, Year :1988

Manufacturer: Koch , Type: SBD-B, Control: Siemens, Min.-max. working length in mm: 250-2500, Working width min-max mm: 10-150, Min.-max. workpiece thickness in mm: 10-60, Drilling support horizontal: 2, Drill gearings: 6, Drill gearings: 6, Drill support from top: 4, Drill gearings: 6, Drilling engine kW: ca.1,5, Working range max mm: 60, Dovel lenght mm: 10 X 30, Number of doveling tools: 4, Glue high-pressure pump: yes, Glue quantity setting: yes, Dowels horizontal: yes, FREE TEXT: mitMagazin und Rückführung der Werkstücke,

Manufacturer: Koch Windoor, Type: BL-51-NC, Year: 1998, Control: Beckhoff, Work piece width min-max mm: 30-200, Milling spindles horizontal: 2, Feeding speed max m/min: ca.80, Drill vertical Y: 5, Horizontal drills-X: 9, Number of milling spindles: 4, FREE TEXT: Dübelwerkzeuge 3, Year :1998

Manufacturer: Koch Windoor, Type: BL-51-NC, Year: 1997, Control: Beckhoff, Work piece width min-max mm: 30-200, Min.-max. workpiece length in mm: 100-5000, Min.-max. workpiece height in mm: 10-90, Milling spindles horizontal: 2, Milling spindles vertical: 2, Feeding speed max m/min: ca.80, Drill vertical Y: 5, Horizontal drills-X: 9, Drill gearings: 3, Drill gearings: 3, Drill gearings: 3, Number of milling spindles: 4, FREE TEXT: Dübelwerkzeuge 3, Year :1997

Manufacturer: Pankoke und Kochsiek, Type: BFA-03, Control: hand, Program-controlled: no, Min.-max. workpiece length in mm: 22,5, Min.-max. workpiece height in mm: 0,75, Program: 40, Drilling beam swivel-mounted: no, Lochraster: yes, Drilling engine kW: yes, Working range max mm: yes, Drilling support horizontal: 2, Dovel insertion: inkl. Magazinaufstapel Magazin und Hauptsäge und Nutsäge,

Manufacturer: Koch , Type: BLG, Year: 1992, Control: hand, Program-controlled: yes, Software: 300, Work piece width min-max mm: 200-2500, Min.-max. workpiece length in mm: 10-60, Program: yes, Lochraster: alle 2, Drilling engine kW: 60/80, Working range max mm: 2 von hinten, Drilling supprt from bottom: 2, Drill supports from behind: 7, Work piece refeeding: yes, Taktleitung min: 1, Dovel insertion: yes, Overhauled on: alle Bohrgetriebe drehbar 360 Grad, Year :1992

Manufacturer: KOCH, Type: DL 60, Year: ca.1992, Control: umgerüstet auf elektronische Leimventile, Work bays: 1, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 40, Min.-max. workpiece height in mm: 2800, Work piece depth mm: 800, Work piece width min-max mm: 60, Feeding speed m/min: ca.40, Centre support: no, Beleimwerkzeuge: 6, Dovel insertion: yes, Dovel diameter mm: 8, Work piece clamping: pneumatisch, Low-pressure gluing system: 2, Year :ca.1992

Manufacturer: Koch, Type: Compact, Year: 1994, Control: NC, Work piece width min-max mm: 200, Min.-max. workpiece length in mm: 150-2100, Min.-max. workpiece height in mm: 10-80, Saw diameter mm: 400, Drilling support horizontal: 2, Drilling gearbox number horizontal: 2, Drilling supprt from bottom: keine, Drill spindles per support: 5, Drill-beam 90° swivel mounted: yes, Grid 32 mm: 17/22/35/30/124, Year :1994

Manufacturer: Koch Säge Bohr und Dübelanlage, Type: SBD-30-A, Year: 1991, Control: Koch, Work piece width min-max mm: 30 - 130, Min.-max. workpiece length in mm: 300 - 2500, Min.-max. workpiece height in mm: 20 - 40, Saw diameter mm: 300, Drilling gearbox number horizontal: 2, Re-charging: yes, Dovel insertion: yes 10-12 mm, Workpiece magazine: yes, Work piece refeeding: yes, Glue monitoring: yes, Drill spindle pitch mm: 17/22/30/35, Year :1991

Manufacturer: Koch , Type: Sigma, Year: 1985, Min.-max. workpiece length in mm: 1800, Drilling support horizontal: 1, Bohrgetriebe horizontal Stk.: 1, Drilling supprt from bottom: 1, Bohrgetriebe von unten Stk.: 2, Working range max mm: 60, Raster mm: 32, Number of drill spindles: Horizontal 21<CRLF>Vertikal 2 x 9, Working range max mm: 60, Manufacturer: Koch , Year :1985

Manufacturer: Koch, Type: BD 60, Year: 1985, Control: hand, Work piece width min-max mm: 30-600, Min.-max. workpiece length in mm: 250-2500, Min.-max. workpiece height in mm: 10-45, Drilling support horizontal: 2, Bohrgetriebe horizontal Stk.: 4, Drill support from top: 2, Bohrgetriebe von oben Stk.: 4, Bohrsupporte von hinten: keine, Working range max mm: 60, Bohrgetriebe gesamt Stk: 8, Raster mm: 32/64, Drilling engine kW: 1,2, Working range max mm: 60, Dovel units: 6, Dovel insertion: yes, Dovel diameter mm: 6 X30, Pneumatic clamping: yes, Work stations: 2, Manufacturer: Koch, Year :1985

Manufacturer: Koch Contuorfräsmaschine, Type: Sprint PTP 2 1800, Year: 2012, Control: Beckhoff, Program: Koch-Wop, Online connection: möglich, Machining stations: 2, 4 Achsensteuerung: yes, Work piece width min-max mm: 120-1360, Work piece length min-max mm: 120-1360, Work piece thickness min-max mm: 19-25, Number of milling spindles: 1, Milling spindles horizontal: 1, Tastend Aggregat: 1, Power kW 1: ca.0,75, RPM min-max 1: 18000, FREE TEXT: zusätzliche Festplatte/Windows XP, Year :2012

Manufacturer: Biesse, Type: Beta, Year: 1984, Control: Elektrisch, Work bays: 1, Working length max mm: 3200, Working lenght min mm: 180, Dovel diameter mm: 8, Dovel lenght mm: 30, Number of doveling tools: 7, Lochraster: 32, Dovel insertion: yes, Work piece clamping: yes, Pneumatic clamping: yes, Work stations: 1, Wight approx. kg: 2500, Year :1984

Manufacturer: Koch, Type: DL 80, Year: 1982, Control: Elektrisch, Work bays: 1, Work piece thickness mm: 40, Werkstücklänge mm: 180-2500, Work piece depth mm: 800, Work piece thickness mm: 40, Feeding speed m/min: 60, Mittenunterstützung: yes, Lochraster: 32, Beleimwerkzeuge: 12, Dovel insertion: yes, Work piece clamping: pneumatisch, Work stations: 1, Wight approx. kg: 3000, Year :1982

Sawing, milling, drilling and dowel inserting machine Koch type SFBD-B Universal + BL25 Specifications: Machine working :d the top side in continuous with additional: 4 drilling supports vertically from above 4 drilling supports: horizontal from the back Aggregates: tiltable Workpiece length (mm): 330 - 2500 Workpiece width (mm): 40 - 180 (200 mm for straight cut) Workpiece thickness (mm): 15 - 80 mm Dowel (mm): 8 + 10 + 12 x 30 + 40 + 50 Dowel extension (mm): 10 - 25  Machine dimension: Length (mm): 8040 Width (mm): 5850 Height (mm): 2500

Dowel vending machine Koch with a very good condition Incl. window tools IV 68- IV 72- IV-86 as good as new 13,000 EURO Furniture processing is possible: minimum size 30 mm The system is available for immediate delivery PS.: Technical data on request!

Manufacturer: Koch, Type: BD 61 PTP, Year: 1996, Control: Beckhoff, Software: Beckhoff, Working width min-max mm: 50-1200, Min.-max. workpiece thickness in mm: 10-50, Drilling support horizontal: 1, Drill gearings: 1, Drill gearings: 1, Drill gearings: 1, Number of drill spindles: 1, Drilling engine kW: ca.1,0, Working range max mm: 60, Axis-controlled: X/Z, Dovel lenght mm: 8 X 30, Number of doveling tools: 1, Elektronische : yes, Dowel monitoring: yes, Glue high-pressure pump: Niededruck, Glue quantity setting: yes, Beleimwerkzeuge: 1, Dovel insertion: yes, Dowel size mm: 8, Drilling depth: 45, Drilling hight: 50, Year :1996

6-colour format: 720 mm<br>TYP: 500, 6 INTAGLIO + 1 FLEXO, PAPIER & FOLIEN 50-150 GSM, ROLLS of 800 MM WIDTH: 750 MM;<br><br>Still in operation: Yes<br>Verf Gbar: immediately