0 KOLLE used machine for sale

Swivel spindle milling machine VEMA TFMS 2-4 very good condition, as good as new, the machine comes from a penitentiary and has only stood for the last few years, it has been used very little and only operated by one person the company VEMA comes from northern Germany, the machine is similar in design to the KÖLLE F45 or the PANHANS 240 everything works perfectly all bearings and guides are OK Year of construction 1998 the machine has the control panel at the top with milling stop, which can be adjusted in depth on one side or completely, this is possible with a handwheel, there is a mechanical counter for the complete adjustment, the counter can be set to zero at any point at the touch of a button, so the stop can be adjusted quickly and very precisely both stop jaws can also be adjusted individually, there are also 2 mechanical counters, due to the one-sided adjustment, dres ...

Swivel spindle milling machine KÖLLE F 45 very good condition, the machine comes from an assembly company and has only stood for the last few years, it was no longer needed everything works perfectly all bearings and guides are OK, the machine has a very smooth running Year of Make: 1990 with control panel at the top on the milling fence, both stop jaws can be adjusted in depth, with fine adjustment and scale, so dressing work can also be carried out, e.g. on a gluing profile, the entire milling fence can also be completely adjusted in depth with an adjustment wheel and a threaded spindle, which allows very precise and fast adjustments with AIGNER integral stop with spindle lock by lever the chips can be discharged very well, with 2 suction nozzles, 125mm at the milling stop and at the machine table it is 100mm with 30mm spindle, which can be swivelled continuously from -5 t ...

Pellet mill for straw / hay / alfalfa and much more ! Plant is about 500 hours. Running . Flat die 8mm and Koller head are included '

Kollergang Fa. Haendle Type HMS 2080b

Kölle Band Saw BSM40 - With belt sanding and welding machine Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Koller head with 5 wheels, used

Tenon milling machine / tenon cutting and slitting machine Manufacturer: Kölle Model: Z40 Year of construction: 1992 1 x Sawing 1 x Milling

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

l 45 kw POWER 680 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

l 90 kw POWER 1350 kg/h (depending on material/full load) Active process and computer-controlled Koller PP 500 is a pellet line consisting of the following machines: - DOSAGE SYSTEM with an automatic PLC control of the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for wood chip raw material - Pellet mill with main motor 90 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system to control the blockage of the Matritze Humidity monitoring - Cooling and dedusting system for the pellets produced via a screw

L 30 Kw POWER 450 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 30 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

L 22 Kw POWER 330 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 22 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

L 45 Kw POWER 680 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 45 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

Wood pelletizing plant, KAHL pellet press used the complex includes: Pellet press AMANDUS KAHL Matrice diameter approx. 1000 mm Pallet diameter approx. Ø 8 mm 5 Koller approx. Ø 340 x 130 mm Motor power 160 kW an auxiliary motor is damaged, but can be replaced by us Dimensions approx. 1600 x 1800 x 3000 mm + motor Weight approx. 8000 kg Conditioner / Dosing and Mixing Screw Diameter approx. Ø 400 mm 5.5 kW Dimensions approx. 3100 x 900 x 800 mm Single shaft paddle mixer Dimensions approx. 3300 x 1600 x 2000 mm + gear motor Pellet coolers Dimensions approx. 2300 x 2300 x 3000 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Kölle planer, or ‘planer’ for short, for smoothing and levelling (planing) timber. Includes an adjustable angle stop and accessories Technical data: Working width: 600 mm Blade system: Z2 strip planing blades Condition: Gebraucht Location: Tauberbischofsheim, Germany

Kölle HA 51 planer, or ‘planer’ for short, for smoothing and levelling (planing) timber. Includes Hemag jointing unit. Technical data: Working width: 450 mm Working height: 100 mm (joining) Condition: Gebraucht Location: Tauberbischofsheim, Germany

roll diameter: 800 mm throat: 765 mm workpiece height: ? mm total power requirement: ? kW weight of the machine ca.: 0,9 t dimensions of the machine ca.: 2 x 1 x 2,6 m No. 1548 Vertical band saw KÖLLE BG-80 Working area: Table, tiltable 1200 x 800 Passage saw blade machine stand 765 mm IDEAL saw blade welding and grinding device Roller diameter 800 mm. Space requirement approx. 2 x 1 x 2.6 m Weight approx. 900 kgm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU413X1252 MakeKöllemann Adenau LocationBarneveld CEcheck TypeAJK-QTHSF-DN600 Pressure Working pressure jacket3 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume6000 Ltr. Motor15 KW Specified Features - Continuous dryer Torus-disc dryer4-shaft screw dryer” (1x) Continuouscheck CapacityCa. 6000 l. Trough sizes5920x1970x600 mm Inlet2x DN250 Outlet260x1500 mm With jacketvolume 650+200 l. Shaft can be heatedcheck Max. temperature100°C Motor15 kW, 400 volt, 1450 rpm (Ex) Speed mixing shaft5.2 rpm With jacketcheck Continuous dryers MaterialStainless steel 1.4301 (304) General No.0505190/204986/02 Year of construction2004 Mounted on framecheck Floorspace8,50x2,40 m Total height1,60 m Weight17.000 kgGeneric medicinesTea, herbs & coffeeStarchGreen FridayBiotechnologyPlastic & polymersCatalysts & fillersFeed additivesAnimal ...

General SKU244X191 MakeKöllemann LocationBarneveld CEcheck TypeDT KSF 2XDN300 5500 lg Pressure Working pressure jacket3 Bar Technical specs Max. temperature550 °C Main Features MaterialMild steel Motor1.1 KW Length5500 mm Inlet diameter350 mm Specified Features - Horizontal screw conveyor Horizontal conveyor screwcheck Trough-typecheck Double shaftcheck Diameter2x 300 mm Length5500 mm Between inlet and outlet4950mm Shaft diameter140mm Pitch150mm InletDia. 200 and 350 mm Outlet400x150 mm With jacketcheck Max. temperature35°C Motor1,1 kW, 220-240/380-415 volt, 1400 rpm Screw speed2,0 rpm MaterialMild steel With jacketcheck General No.0603120/2081250/01 Mach.No.0603120/2081250/01 Year of construction2006 Floorspace8,0x1,10 m Total height2,0 m Weight2800kg Extra Specificationsthe screw is coolableTea, herbs & coffeeStarchRubberAgrochemicalsSpicesPla ...

Manufacturer: Kölle Tischfräse, Type: F 50, Year: 1990, Control: oben, revolutions rpm: 3000/6000/9000, Length lifting spindle mm: 150, Diameter of the spindle mm: 30, Spindle travel range total mm: 120, Spindle swivel-mounted max Grad: no, Main engine kW: ca.4, Feeding speed: yes, Table extension - lenght: yes, Exhaust diameter mm: 150, Wight approx. kg: ca.900, FREE TEXT: Anschlag ausziehbar/Haffner Vorschub, Year :1990