LODIGE fkm used machines

USED LÖDIGE FKM 2000D STAINLESS STEEL 2.000 LITRES BLENDER REF#: C5725 Lodige FKM2000D mixer with a total volume of 2000 liters manufactured in 316 stainless steel. Two inspection doors with a 55 kw geared motor completely reconditioned. General characteristics: Manufactured by LODIGE Model FKM 2000D Material Stainless steel 316 Year built 1973 Weight 3700 kg (2060 kg + 1640 kg motor and reducer) Technical characteristics: Capacity 2,000 L (800-1,400 L useful) Motor characteristics: Manufactured by SCHORCH Voltage 400/690 V Current 94/55 A Power 55 kW Frequency 50 Hz cos(fi) 0.89 Rotational speed 2960 rpm Reducer characteristics: Manufactured by ELENDER Model SZBW 250 Ratio 0.04 Rotational speed 120 rpm

Stainless steel mixer with Lodige/Loedige rakes 2000 liters Type FKM 2000 D / 6Z Two side inspection doors One side port for liquid mixture injection Manual discharge hatch 6 side shredders / rotating knives Usable volume from 500 to 1500 liters, Elec:: 380V 50Hz 56A , Engine: 30kW 40CH

Used Lodige LHC 150 Spray Coating Unit for Pharma and Nutrition applications. • Working capacity up to 350 Litre • Max batch size up to 250 kg, • Main drum material is stainless steel 316L • Maximum rotation of drum 20 rpm • Maximum flow of process air 2400 m3/h • Maximum temperature of process air: 80 Celsius (176 F) • Maximum humidity of process air 0.022 lbs/2.21 lbs (10 g/kg) • Internal spray coating system with coating guns • Comes with: - separate air handling system - control panel - spray dosing pump Please contact for sizes and weight.

Granulator powder mixer with bolts LÖDIGE / LOEDIGE / LODIGE For wet granulation, without dehuller Year 1965, external dimensions (mm): 800x330 H 450 , Internal dimensions (mm): 175x180 H 173, Volume (L): 4

Material: stainless steel Engine: 160 kW Content: 15000 ltr Weight: 11000 kg Length x Width x Height: 6300 mm x 2200 mm x 2500 mm Mechanism SDW (340kW) Flender Speed: 1500 / 63 More details on request. Very good condition. You can also get the entire system with all components you need.

Batch horizontal mixer in standard steel version, lined inside with carbide, useful filling up to approx. 800 l.. Drive over 37 kW motor, Flender head gear and start-up clutch, equipped with 2 flanges for optional knife heads / choppers. Slingshot shaft with armoured Becker shovels (as good as new). Incl. basic frame for mixer, gearbox, fluid coupling and motor. Sandblasted and repainted.

Mixer batch mixer Loedige FKM 130 D Version in stainless steel Ex protected very good operational condition, directly from production!!! Speed range 29-187 rpm Mixer volume 130 l Power 7.5, KW

Sloping Plough charm Type FKM 600 D stainless steel, without chopper (connection available), drive 15 Kw with speed control. Y.O.M. 1985

x-travel: 1000 mm y-travel: 300 mm z-travel: 400 mm table-size: 1320 x 360 mm spindle taper ISO: 40 spindle turning speed range: 58 - 1800 U/min total power requirement: 4 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,1 x 2,1 x 1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Polygraph kama folding glue machine with 3 points format 104

x-travel: 600 mm y-travel: 300 mm z-travel: 440 mm table-size: 1120 x 260 mm spindle taper ISO: 40 spindle turning speed range: 35 - 1600 U/min total power requirement: 2,2 kW weight of the machine ca.: 1,36 t dimensions of the machine ca.: 1,65 x 1,32 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 50 mm throat: 360 mm bore stroke: 150 mm spindle turning speed range: 120 - 3000 U/min spindle taper: SK 40 : 650 mm : 320 mm vertical adjustment: 500 mm table surface area: 1000 x 300 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 2,2 kW weight of the machine ca.: 0,85 t dimensions of the machine ca.: 1,25 x 1.5 x 2,3 m New Model Industrial Drilling and Milling Machine with Manual Transmission and High Speed Range. The prism guide in the Z-axis ensures a high degree of precision even in the most difficult milling jobs. Domestic equipments: • automatic feed in X-axis • 3-axis digital display • motorized Z-axis • Feed in quill • Left-right-run high • tapping attachment • Gear head swiveling • Coolant system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stainless steel batch mixer with a gross volume of 600 l. (max. usable capacity: approx. 400 l.), centrifugal unit equipped with ploughshares, drive via geared motor with 11.0 kW, outlet flap pneumatically operated, without control cabinet. In very good condition of wear.

Horizontal batch mixer with a gross volume of 6,800 l. (= usable filling: 1,700 l. to 5,100 l. max.). Including drive unit with 110 kW and motor frame. Centrifugal unit equipped with Becker blades, end wall equipped with sampling device, emptying pneumatically via long floor flap.

bore capacity in steel (diameter): 25 mm throat: 185 mm bore stroke: 50 mm spindle taper: MK 3 spindle turning speed range: 50 - 2500 U/min : 178 mm : 480 mm table surface area: 700 x 180 mm connected load frequency: 230 V total power requirement: 0,75 kW weight of the machine ca.: 160 t dimensions of the machine ca.: 0,75 x 0,8 x 0,9 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 300 mm y-travel: 200 mm z-travel: 350 mm table-size: 700 x 200 mm spindle taper ISO: 40 turning speed range - horizontal: 150 - 1660 U/min turning speed range - vertical: 110 - 1230 U/min quill stroke: 120 mm spindle drive: 3,0 kW weight of the machine ca.: 1,15 t dimensions of the machine ca.: 1,31 x 1,38 x 1,65 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 600 mm y-travel: 300 mm z-travel: 350 mm table-size: 1120 x 260 mm spindle taper ISO: 40 spindle turning speed range: 67 - 2010 U/min quill stroke: 120 mm bore capacity in steel: 40 mm total power requirement: 2,2 kW weight of the machine ca.: 1,3 t dimensions of the machine ca.: 1,58 x 1,45 x 2,15 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 70 - 3200 U/min : 520 mm : 230 mm table surface area: 730 x 210 mm connected load frequency: 400 V total power requirement: 1,1/1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,1 x 0,9 x 1,15 m domestic equipments • Digital depth gauge • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 290 mm bore stroke: 130 mm spindle taper: SK 40 spindle turning speed range: 75 - 3200 U/min : 500 mm : 230 mm table surface area: 720 x 210 mm connected load frequency: 400 V diameter of hob: max. 80 mm total power requirement: 1,1 kW weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,1 x 0,9 x 1,2 m domestic equipments • Digital display • Digital depth gauge for quill • Adjustable guides with wedges • Large 12-speed range from 75 to 3200 rpm • Smooth running due to hardened and ground gears running in an oil bath • • Right-left rotation • Prismatic guides in all axes • Gear head can be swiveled 90 ° • Chip protection with safety circuit Machine base optional. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pflugscharmischer, Fabr. Loedige, type: FKM 1200 D. 2 MZ, capacity 1200 ltr., usable capacity approx. 900 ltr., product contact stainless steel, double jacket for heating or cooling, max. 6 bar, 2 pcs cutter heads, mixer drive 22 kw., cutter head drive: 4 kw. each, 400 V. complete with control cabinet, frequency converter available, filling funnel available

Batch mixer with a gross volume of 300 l. (max. usable filling: approx. 200 l.), part in contact with the product in stainless steel V4A, centrifuge equipped with ploughshares, drive via geared motor with 7.3 kW (pole-switchable for 2 speeds), equipped with a cutter head with 4.0 kW (speed approx. 3,000 rpm). Incl. push-button control cabinet and base; Outlet flap manually operated. All tools in very good wear condition.

* General * SKU347X802 * MakeMorton * LocationBarneveld * CEcheck * TypeFKM 3000 D-4MZ * Main Features * MaterialStainless steel * Volume3000 Ltr. * Motor37 KW * Specified Features - Powder turbo mixer * Lödige mixercheck * Powder turbo mixercheck * Capacity3000 Ltr. * Trough sizesø 1110 x 2960 mm * Inletø 250 * Inspection hatch2x 540 x 400 mm * Outletø 350 mm * Motor37 kW,(400V, 1470 rpm) * With variable speed drive115 rpm * Speed mixing shaft127 rpm * With lump breakercheck (4x) * Motor4 kW, 400 V 2920 rpm * Speed lumpbreaker3000 rpm * MaterialStainless steel 1.4401 (316) * Information * No.24262 * Year of construction1999 * Floorspace4,00 x 1,65 m * Total height1,80 m * Weight1900 kgPowder turbo mixersMortonMixers > Powder turbo mixersBrand > Morton What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any ...

* General * SKU347X806 * MakeMorton * LocationBarneveld * CEcheck * TypeFKM 3000 D-4MZ * Main Features * MaterialStainless steel * Volume3000 Ltr. * Motor30 KW * Specified Features - Powder turbo mixer * Lödige mixercheck * Powder turbo mixercheck * Capacity3000 Ltr. * Trough sizesø 1110 x 2960 mm * Inletø 250 * Top connectionsø 350 mm * Inspection hatch2x 540 x 400 mm * Outletø 350 mm * Motor30 kW, 380 V * Speed mixing shaft115 rpm * With lump breakercheck (4x) * Motor4 kW * Speed lumpbreaker3000 rpm * MaterialStainless steel 1.4401 (316) * Information * No.M24066 * Year of construction1995 * Floorspace4,00 x 1,65 m * Total height1,80 m * Weight1900 kgPowder turbo mixersMortonMixers > Powder turbo mixersBrand > Morton What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are ...

* General * SKU347X800 * MakeLödige * LocationBarneveld * CEcheck * TypeFKM3000 D * Main Features * MaterialStainless steel * Volume3000 Ltr. * Motor37 KW * Specified Features - Powder turbo mixer * Powder turbo mixercheck * Capacity3000 Ltr. * Trough sizesø 1100 x 2950 mm * Inletø 200/350 mm * Inspection hatch2x 500 x 400 mm * Outletø 350 mm * Motor30 kW, 380 V 1500 rpm * Speed mixing shaft115 rpm * With lump breakercheck * Motor5,5 kW (4x) * MaterialStainless steel 1.4552 * Information * No.15144 * Year of construction2003 * Floorspace4,80x1,50 m * Total height1,50 m * Weight2160 kg * Extra SpecificationsEquipped with 4 :lump :breakers: the machine can also be operated without : :lump :breakers, as in its current configuration.Powder turbo mixersLoedigeMixers > Powder turbo mixersBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced ...

* General * SKU321X549 * MakeLödige * TypeFKM 600 D * No.10637 * Year of construction1983 * Mounted on framecheck * Pressure * Working pressure jacket0.5 Bar * Main Features * MaterialStainless steel * Volume600 Ltr. * Motor14 KW * Specified Features - Powder turbo mixer * MaterialStainless steel 1.4552 * Powder turbo mixercheck * T-arms5x * Capacity600 l. * Trough sizesDia. 800x1200 mm * InletDia. 250/350 mm * Inspection hatch2x 460x380 mm * Outlet250x180 mm * With jacketcheck 37 l. * Max. temperature110°C * Glands air purgedcheck * Motor15 kW, 380 volt, 1460 rpm * Speed mixing shaft1460 rpm * With lump breaker2x * Motor2x 4 kW, 220/380 volt, 2893 rpm * Speed lumpbreaker2893 rpm * Information * LocationBarneveld * Floorspace2,40x1,20 m * Total height2,20 mPowder turbo mixersLoedigeMixers > Powder turbo mixersBrand > Loedige What you can expect from Foeth: -- Machine is in working cond ...