LOSER ks used machines

HIGH SPEED DOWEL CROSS-CUT AND CHAMFERING MACHINE LOSER MOD. AA220 - Range of working diameter: 6 - 18 mm - Capacity: about 7,500 - 15,000 dowels/hour

Z-kneader, Year of construction 1970, engines, bearings, gears, gearbox, electrics, overhauled around year 2022. Machine is immediately available and ready for use. Z-Kneader has an electric tilting device.

different types: - Straw Shredder KSTAS 7,5kW - Straw Shredder KSTAS 9kW - Straw Shredder KSTAS 11kW electric outlet 400V 50Hz (3 phases) fuse 32 A capacity 6 m³/h dimensions: length 1 225 mm width 785 mm height 1 400 mm weight 220 kg material steel varnished discharge height 550 mm discharge connection diameter Ø 160 mm suitable for all sorts of straw scope of delivery screen 22 mm perforation ; new machine - top condition

- with power take-off drive 540 rpm without universal shaft capacity 6 m³/h dimensions: length 1 225 mm width 785 mm height 1 400 mm weight 220 kg material steel varnished discharge height 550 mm discharge connection diameter Ø 160 mm suitable for all sorts of straw scope of delivery screen 22 mm perforation ; new machine - top condition

Blow molding machine Kosme model: KSB 6R with 6 cavities year of manufacturing: 2017 neck size: PCO 1881 capacity: 12.000 bph container size: max. 3,0 ltr. including preform feeding system including chiller without blowing moulds already dismantled at the end of January 2026

M18L - 1 Screw Head Slitting Machine (used) without vibrating conveyor Make: MENN - Type: KS8 and KS5 Diameter range 1.7-10 mm Shank length under head 3-105 mm Power Piece/Min 27-1.850 Weight 800 kg Engine power 1.5 kW

Material: stainless steel (1.4541) Engine: 7.5 kW Content: 500 ltr Weight: 1000 kg Length x Width x Height: 1200 mm x 1200 mm x 3100 mm With jacket 22 rpm Very good condition. We plan and build for the complete system from used and new machinery, exactly for your needs. Are you looking for something else? Write us below!

Kosme KSB 3000, with 3 tools, achievement approx. 3300 Fl/h with 1.5 l

Painting booth for switching to dryer operation: Make : LUTRO Type : KSP7-BT Built: 1993 Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps : LED, 2 x 4 pcs recessed luminaires with 3 x each ? W Entrance side: 2-leaf gate 2.3 m x 2.8 m (approx. WxH) Escape door: 0.6 m x 2.3 m (approx. WxH) Rusting: 5,620 x 1,910 mm (approx. WxD), 22 pieces 950x510 mm Heating unit: 242 kW, oil burner Dry temperature: 80 degrees C Supply air unit: 22,000 m3/h Exhaust unit: 22,000 m3/h Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Location : Schwaz, Austria Sales price: € 9,990,- net, from location, without dismantling We also have other complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, grating ...

Various secure retirements for Canalis KS25 tracks, some with CEE and Sockets, partly for cable connection. Outlets with outlet fuses with machines or screw locks. Compl. Wired and ready for use. Finish request please inform. Questions to Manfred Raupp 0170 / 2204056 Mail to: fa.raupp@t-online

To sieve dry material: like flour-, grainy-, and granule-shaped material. Free running sieve case hanging in a massive framework With an automatic sieve ball cleaning. Sieve-layers in a simple way interchangeably. Applicable to sieve all floury-, grainy materials in dry condition. Sizes of Wide 500 – 1500mm / Lengths 1200 – 2400mm Sieve layers 2 to 4 layers, grain

Finish securing distribution for Canalis KSA busbars up to 250. Equipped with Neozed 3x16A, for cable outlet. 67 PCs. available price per piece 8.-collection KLINGENBERG or plus shipping costs. Immaculate condition such as photo For details see under Raupp 0170 / 2204056. or at fa.raupp@t-online

Finish securing distribution for Canalis KSA busbars up to 250. Equipped with Diazed, for cable outlet. 9 PCs. available price per piece 39.-collection KLINGENBERG or plus shipping costs. Immaculate condition such as photo For details see under Raupp 0170 / 2204056. or at fa.raupp@t-online

Working width: 5050 mm thickness: 10 mm power: 30 kW space: 2450 x 5600 x 2500 mm weight: 28000 kg

Working width: 5050 mm thickness: 10 mm power: 30 kW space: 2450 x 5600 x 2500 mm weight: 28000 kg

Key data: 100 , 140

Stock No.2452 1 used, partially overhauled and functionally tested pelletizing line Throughput up to 500 kg/h depending on the material, consisting of: Tamping unit Kreyenborg SW 100, drive 7.5 kW Extruder BKG single screw Ø 100 mm – 35 LD, Drive 132 kW – AC frequency controlled Screw speed up to 143 rpm.-1 screw depth 14 mm Heating capacity approx. 35 kW installed 1x athm. Degassing zone Screen-pack-changer Double piston Kreyenborg K-SWE 160 RS back-flush self-cleaning with screen surface 244 cm² BKG underwater pelletizer AH 300, complete with: Start-up valve incl. Hydraulic station Granulator with drive 4 kW Water pump 2.2 kW By-pass system, water tank with heating 9 kW installed and heat exchanger BKG granulate centrifuge TWE 300 with drive 3 kW pellet classifier table Control board and Siemens material feed conveying, big-bag filling station � ...

; NEW

Centrifugal grinding machine / sliding grinding machine for deburring, rounding, polishing of factory troughs. Machines with 18, 60 or 160 litre capacity. Machines incl. dosing pump, speed control and control cabinet - separian unit optional. Detailed offer on request;; New

KR-DUO cutter system Individual adjustment of the size of the piece Suitable to baking sheets 600 x 400mm as well as 600 x 200mm (as well as intermediate size) The longitudinal cut is effected in the lower cutting level The lateral cut is effected in the upper cutting level For every cutting level an individual number of cutting passes can be chosen. The machine is manufactured exclusively from food-grade materials. Power: 380V, 50 Hz, 3 Ph

Unused gearboxes, angular gearboxes, partly without electric motors, partly with electric motors. Manufacturers e.g. PWH Plants + Systems GmbH These types and others pre-raetig: 1. PWH 90KW Type K2SZG250 n1=1500 rpm n2= 75 rpm i=20 P=90 KW Length over everything: 120cm Width over all approx. 55cm Height approx. 56cm Diameter of shaft rear (lies laengs) 45mm Transducer of the shaft front (lies transverse) outside 160mm Transducer of the shaft front (lies transversely) inside 140mm Weight-cooked 1,000kg 2. PWH 45KW Type KSZG200 n1=1470 rpm n2= 73.5 rpm i=20 P=45 KW All over: 94cm Pq7hwm Width over all approx. 45cm Height approx. 46cm Diameter of shaft rear (lies laengs) 50mm Transducer of the shaft front (lies transverse) outside 150mm Transducer of the shaft front (lies transverse) inside 120mm, passage 100mm Weight-cooked 600kg 3. PWH 37KW Type KSZG180 ...

Thank you for your interest on our machines, we like this may offer you: Manufacturer: Sandeep Singh Model: KSF 800 marzipan & nougat transformer Year of construction: 1977 Working width: 800 mm Capacity: Ã? 20mm - article 8 g - 180 kg /. Electr. Values: 230/400 V, 50 Hz Details: - with 17 different form rollers (!) -Suitable for large production volumes -Plastic rollers with steel core -Stepless speed control -with prior extruder and feed conveyor -For Marzipan and nougat mass We offer this machine "as available" without any warranty/warranty claims or representations for sale. from stock Hess. Lichtenau; bulk

Technical data: -Clip device -Glass Strip saw blade diameter approx. 300 mm -Pneum.. Material clamping - powered 400 V - Working pressure 7 bar -Air consumption per operation approx. 1.6 L / stroke -with: - Removal - roller conveyor with controlled positioning - level stop 3000 mm -Feed - roller 3000 mm - e - foot switch - regulator - space about B 4200 x H 1700 X 900 mm -Weight approx. 600 kg

Weibert WJ-KS26 Edge grinding machine with oscillation NEW MACHINE! 400V 3 KW ( 4 hp) S1 100% n=2840 min. Grinding table 750x300mm Table height adjustment 200mm Abrasive back wall 850x200mm Grinding belt dimension 2600x150mm Grinding unit swivelable 90°-45° with quick adjustment Band speed 20m/sec. Oscillation on and off motor 0.25 KW (0.34 hp) Central suction connection 120mm Manual adjusting m degree display! WJ-R00100 The following options included in the price! Roller pull-out table widening WJ-R00101 Miter stroke WJ-R00102 Driving device WJ-R00103 Feed machine 3 rollers 120mm with bracket special price

Weibert KS30 Edge grinding machine with oscillation, rotary star and veneer cut with rotary star 60-100-120mm WEIBERT WJ-KS30 new 400V 3 KW (4 hp) n=2840 min Work table 960x350 mm Table height adjustment 230 mm Abrasive back wall 1050x200 mm Band speed 20 m/sec Oscillation stroke 20 mm Oscillation motor 0.25 KW (0.34 hp) Can be switched on/off Machine table and guides made of GRAUGUSS Quick adjustment of the swivel 90°-45° with degree display Weight of 400 kg Suction nozzles 120 mm Rotary star with 3 additional contact rollers 60-100-120mm Bandwidth 150 mm WJ-R00200K1 Roller pull-out table widening

Cake cutting machine Krumbein KSSM V3,0 D used automatic cake cutting machine from Krumbein KSSM V3,0D for 60cm wide sheets for sale immediately available in stock. The machine cuts long and cross, knives are removable for cleaning. -Krumbein cake cutting machine -with digital control -380 Volt 3Ph 50 Hz 16 A