MAAG sh used machines

SH75 max. wheel diameter 750 mm gear width 200 mm max. module 10 min. module 1 min. wheel diameter 30 mm max. number of teeth 300 min. number of teeth 6 tooth helical angle min/max 0 / 60 ° min. ram stroke 0 mm max. ram stroke 225 mm table diameter 500 mm table load 0,8 t no. of strokes 23,5 - 150 Hub/min table hole 90 mm total power requirement 7 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2,1 x 1,7 x 2,1 m

MAX DIAMETER 750,MAX MODULE 10

MAAG SH-45 Gear shaping machine Min - max diameter 20 - 450 mm Min - max module 1 - 6 Min - max teeth diameter 6 - 250 Min - max tool stroke 0 - 145 mm Table diameter 360 mm Machine dimensions (LxWxH) 2100x1500x2000 mm Machine weight 3600 Kg Change gears The MAAG SH-45 Gear Cutting Machine is suitable for machining of: -External & internal cylindrical gears -Pinions -Spur & helical gears -Gear teeth with longitudinal and profile corrections -Cluster gears -Double helical gear Pictures attached. The machine was in operation for approximately 25 years in a custom manufacturing workshop producing one-off parts according to customer drawings, including gears, shafts, and components for machine tools and transport vehicles. It is in very good condition. Fully functional until it was last used. It hasn't been cleaned, so it doesn't have a "showroom" appearance.

Various MAAG pump E.g. Extrex 90, 70, 56, and 36 Reconditioned available from stock in Wuppertal. more details on request

Semi-automatic flocking system Flockkabine MAAG flocking technology The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the parts were coated for the automotive industry.

Planing comb to Maag gear planing machine

Ref. -No.: 10103 Manufacturer: MAAG Year of construction: 1976 Type of control: Konventionell Control: N/A Storage location: Halberstadt Country of origin: Schweiz Minimum number of teeth: 6 Max. Number of teeth: 300 Serial no.: 4216 Gear width: 200 mm Max. Pile driving: 225 mm Max. Wheel Diameter: 750 mm Min. Wheel Diameter: 30 mm Table Diameter: 500 mm Max. Module: 10 mm Min. Module: 1 mm Spiral Angle: 0/60 °

Inv. Num. : 9278 Type: HSS-10 Producer: MAAG Generated: Parameters: Maximum grinding wheel diameter: 220 mm Max. workpiece weight: 6 kg

Semi-automatic flocking system The system is used for coating and with different materials. It is also conceivable to use it as a painting system. In this particular case, the inner parts were coated by handheld compartments for the automotive industry. The handheld boxes hung on a chain conveyor belt and were first sprayed with glue by hand. Afterwards, the boxes were sprayed with the flocking material in the individual flock cabins. The spraying direction changes from station to station.

used hydraulic unit with accumulator

max. wheel diameter: 600 mm gear width: 150 mm max. module: 15 min. module: 1 clamping length min.: 45 mm clamping length max.: 750 mm workpiece weight: 150 kg total power requirement: kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: 1,2x0,8x1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic power unit with pressure accumulator

max. wheel diameter: NA mm gear width: NA mm max. module: min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manually operated 2-Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 1000 mm gear width: 630 mm max. module: 16 min. module: 1 wheel diameter with counterstay: 800 mm max. number of teeth: 999 clamping length: 1060 mm workpiece weight: 1500 kg max.helical angle: 45 ° grinding spindle drive: ca. 20 kW Control: Opal / Siemens total power requirement: 70 kW weight of the machine ca.: 17,5 t - CNC control Opal / Indramat with Siemens S5 PLC - paperbandfilter - oil mist exhauster - complete covering The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ling Systems Stainless heat shrink tunnel, stainless mesh belt, variable speed belt dimensions 2500mm x 400mm, max product height 80mm, adjustable digital temp control

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE!!

SHARK 281, manual band sawing machine to cut from 0° to 60° left. A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle. BEST PRICES FOR ALL MEP MACHINES IN EUROPE! ASK FOR A QUOTE!!

Shaper cutters from Module 1 to Module 14 available: - different no. of teeth, different pressure anles, different profiles, bores and sizes! shaft cutters Module 1-3 = 150 Euro, 4-5 = 250 Euro, >5 = 300 Euro disc cutters Module 1-3 = 150 Euro, 4-6 = 200 Euro, 7-10 = 250 Euro, 10-14 = 300 Euro. complete list on request! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clean room pass box. 2-doors Pallet air Shower UV. Pass boxes Air Shower UV is aimed at dust removal and disinfection processes using ultraviolet light (UV) without wastes. Thanks to the fans in the unit and the induction nozzles, dust is removed and collected in the equipment’s filters.

Rondo Laminazione pastry sheeting line 2001, Stainless, total length 7000mm, this line comprises an infeed section – multi roller satellite head, cross pinner and then calibrator making puff pastry from blocks / billets to final width of 600 mm and 2-3mm thickness, comes complete with electrical drawings and manuals.

Technical data of the profile clamp: Manufacturer: META Type: CLIP The scope of delivery includes: 01x Profile clamp, used Design: for double shelves Material colour: hot-dip galvanized Total height: approx. 82 mm Total width: approx. 46 mm Material thickness: approx. 2 mm Weight | Pcs. approx. 0,150 Kg Note: Since these are second-hand goods, there may be damage, rusting, etc. Currently available in stock: approx. 200 pcs. Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

T-Shape 3 in1 Multisystem // Year of manufacture 2020 T-Shape combines 3 powerful technologies that work simultaneously to promote the production of collagen and significantly reduce the local volume of fat and elasticity of the skin. It provides a deep and immediate increase in blood circulation and lymphatic drainage, which in turn improves physical fitness - Tightening of the skin - Reduction of cellulite - Reduction of fat deposits - Reduction of scope - Treatment after liposuction - Face lift and skin tightening RF (Radio Frequency) T-Shape generates a bipolar, quadripolar and hexapolar radio frequency signal. Heat is generated by the contact of the RF (radio frequency) energy with the tissue impedance. With proper heating, the collagen-rich dermis is immediately denatured, the fibrils contract and thicken. In response to the initial heat, new collagen is produced, an ...

Agnelli Automatic sheeter Stainless, Automatic sheeter and kneader, Produces pasta sheets, Up to 250Kgs per hour, Stainless 200Kg agitated hopper, 250mm sheets, variable speed, with spare belt, 3Ph

Dough laminator Dimensions: 2550x1000x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 500x1980mm Distance with adjustable roller: 1-45 mm Weight: 220kg

Dough laminator Dimensions: 3480x1110x1280mm Electric power: 0.75kW Voltage: 220V 50Hz Conveyor belt dimensions: 610x2800mm Distance with adjustable roller: 1-40 mm Weight: 260kg