MAGGI system used machines

CATALOG NUMBER M0252 PRODUCT FEATURES The main features of the machine: - Single-head drilling machine for drilling in the range of 0 - 90 ° - Pivoting angle of the head adjusted pneumatically - Possibility to set lateral supports with an accuracy of 0.1 mm - Safety holders allow quick adjustment of panels without adjustment - Spindles adapted for quick couplers - Patented pneumatic clamps of the material - MDF work table - Quick and accurate adjustment - Precise drilling - Italian production Standard equipment of the machine: - 2 aluminum rulers with a length of 1.5 m (right and left) with four stopwatches - 5 quick connectors - Wooden box securing the machine in transport. ADVANTAGES - vertical / horizontal / angled drilling - multi-spindle - new machine - CE certificate - solid - professional TECHNICAL DATA - number of spindles 23 - dista ...

Specifications: Uniform spindle spacing: 32 mm Number of spindles: 23 Distance between the first and last spindle on the drill head: 672 mm drilling depth: 80 mm Table size: approx. 900 x 545 mm size of the workpiece: 800 x 2500 x 100 Working pressure: 0.6 MPa Air consumption: 10 NL/cycle Voltage, frequency: 400 V/50 Hz Spindle speed / min.l: 2800 rpm. Motor power: 1.5 kW Weight ca: 400 kg Dimensions: 1220 x 1065 x 1400 mm * Patented spiral system Programming and adjustment devices of horizontal and vertical Drilling depth. * Pneumatic drill head shears * Drill head frame of 0-90 degrees with blocking in any position and reference switching angle with each angle * Head with quick-connect spindles (the quick-release buckets are a Zubehoer). * 5 quick-release buckets are standard. * 2 patented pneumatic pressure devices accident-protected. * 2 side connectors on th ...

Duebel hole drilling machine BORING SYSTEM 21 PRESTIGE QUICK CONNECTIONS 21 DRILLING SPINDLES AXLE DISTANCE 32 MM CENTER DISTANCE FROM THE FIRST TO THE LAST DRILL CHUCK 640 mm DRILLING DEPTH 65 mm Engine power 2 hp Aluminium stop with 2 folding straps equipped with 1 left stop 1500 mm and 1 right stop 1500 mm 5 drilling spindle droplets 2 Pneumatic hold-downs in a safe and secure manner incl. packaging Quick Connection Drilling Spindles Drill head in cast iron Cast iron work table Drilling depth adjustment via patented spiral system Pneumatic scraping of the drilling group from 00 to 90 ° adjustable in any position. Stop infinitely adjustable via millimeter scale with magnifying glass High drills over num. digital display adjustable Back-side stop max. travel 300 mm Fixed stop on 37 mm for doorband Machine built according to Ce standards

Type Junior 640 Motor power 3 kW Blade diameter 350 mm Motor arbor 30 mm Blade speed, rpm 2800 rpm Max trimming capacity: 860 mm Depth of cut with motor at 45? mm Depth of cut 90?: 110 mm Table dimensions 1050?690 mm Saw the angle 0? +45? -45? Made in Italy Transport dimensions Weight 180 kg

Cutting height: 60 mm saw-blade dia.: 350 mm Motor output: 5,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting height: 60 mm saw-blade dia.: 350 mm Motor output: 5,2 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

1994. 1996, 2004

motor power 3KW Table top dimensions 2000x770mm 3-angle cutting adjustment year of manufacture 2009 cutting height max 125mm maximum cutting width 865 mm 400 V

Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting height: 195 mm saw-blade dia.: 550 mm Motor output: 5,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Latex coating system by Brückner carpet coating system and laminating system Technical data: Max. Working width: 5200 mm The clamping machine can utilise all reserves can be used up to a clamping width of 5250 mm. Min. working width: 3400 mm for Prage 3500 mm Drive speed: 2 -. 15 m/min. Drive: Direct current motors Operating side: right Colour of the system: RAL 1.015 structure Goods transport system: vertical needle chain Length of one field: 3 m Fans per field: 2 The output of one fan: . Fan power: 7.5 kW Heating systems - per field: 2, separately above and below the web Adjustable air temperature: 50 - 250 .° C Achievable temperature spread: 160 ° at the top, 100 ° at the bottom or top 200 ° , bottom 125 ° Size of the dryer Pre-drying: 5 fields Gelling channel: 3 fields Vulcanising channel: 12 fields Production speed: 9- m/min. with the following data: P ...

Lundberg suction motor, for paper edges waste with granulator.

Waters Acquity UPLC-MS System, Used Acquity UPLC-MS System by Waters from 2009, used very little, with systematic proof of maintenance, from a large pharmaceutical company, with 6 months warranty and training and installation at the customer's site. . The system is sold with an additional set of spare parts in the form of an identical UPLC system (without MS). Each system can be viewed and tested in operation. The UPLC-MS system consists of the following parts: - SQD mass detector - Sample Organizer - Sample Manager - PDA detector - Binary Pump Manager - Column Manager Price complete system with additional modules as spare parts

We are offering for sale a EuroPallet complete system consisting of the following components: - Block destacker - Skid nailer - Skid inserts - Deck board insert - Main nail machine - Skid milling machine - Burning device - Corner saw - pallet stacker - Outfeed conveyor This offering includes a variety of makes and models, assembled from multiple sources. The equipment spans model years from 1980 to 2005, providing a diverse and robust setup. The system is designed for efficient operation, requiring only three personnel. It currently produces approximately 150 pieces per hour, with potential for significantly higher output through minor adjustments or upgrades. Find more here - / Contact us at -

GE Äkta Purifier 10 FPLC System Box 900 P 900 Pump /10 ml pump heads UPC 900 Monitor INV 907 Valve M925 Mixer / 6 ml mixing chamber Conductivity Flow Cell pH Sample CU 950 Interface/Communication Module FRAC 920 Fraction Collector Unicorn Software

The plant was installed in 2011. Vacuum conveying system operated by VOLKMANN, for grinding products in a HOSOKAWA sieve mill with enclosed metal detection. In addition available: BUSCH vacuum pump, KAESER compressor, VALCO dust extraction system, MOTEC suction device for product feeding table and much more. All components (except the exhaust system BJ 2009 and the HOSOKAWA Bexmill 200 Year ca. 2006) are from this year. There are no recorded operating hours, but should be around 6000h. The plant was decommissioned in 2019. The plant has been cleaned and disassembled. But could be put into operation for a demonstration or for recording presentation videos. Find more here - /

It is a vacuum conveying system with a conveying capacity of approx. 1 ton per hour. Vacuum conveying and product feeding table is from VOLKMANN. Dust extraction at the product feeding table is from MOTEC Dust extraction system from VALCO Compressed air from KAESER Vacuum pump from BUSCH Metal separator from MESOTRONIC Sieve mill from HOSOKAWA BEPEX The products are fed onto the sieve mill and then fall by gravity into a bigbag (bigbag rack and pallet scale are also part of the system). The plant is currently cleaned and thus partly dismantled. However, it could be put into operation as a demonstration. Find more here - / Contact us at -

Screening system The parts list of the screening system. The system was initially operated with a generator and now has a permanent power connection. - Vibratory conveyor trough with double balancing drive - Single deck vibrating screen SEWU 2400x5000 - Industrial trailer with all-wheel steering and swing axles, mechanical support feet, payload 47 tons - Steinert overband magnetic separator UMP 90 180 W - Trough conveyor belt, center distance 13 m, belt width 2 m - MTS conveyor belt scale in the fine grain belt - Draabe Luftfeuchtungsystem MyFog Find more here - / Contact us at -

Electroplating test system for high flow / separation It does not have a control/transport cart and has not yet been used. That was our model system. It is a separator bath with 3 positions The positions are designed for vertical and horizontal arrival including a 25mm movement of goods. The buyer can view the system, and also dismantle it. High-performance test containers for ViaFill and AR 1:40 Features: - Aspect ratio up to 1:40 - Multifunctional system for panel & pattern plating, blind micro via plating, via filling plating, button and bridge plating - Suitable for flex circuit substrates up to 6.2 mm thick - Segmented anodes with 3 inert anodes per PCB - 372 slots for eductors with horizontal flow per PCB - Two-dimensional fabric movement in the copper cell The copper cell: Our copper cell is designed for PCBs from 18" x 25" to 21" x 24". Hydrodynamic conditions are gu ...

2008 Herco ACR SYSTEM 23-1000 ACTIVATED CARBON RECOVERY SYSTEM Gas recovery system The installation is 10 years old, has a max. adsorption capacity for 75 fridges per hour, with a suction capacity of 850 m³/h. It is a system with activated carbon adsorption, with desorption over a cryo-unit. Designated Application Scope of Application The delivered recovery plant is designed and manufactured for reclaiming propellants refrigerator recycling. The propellants, vaporized during the shredding process, are sucked off from the shredder and adsorbents in the recovery plant. Other applications are not provided. If the plant is used for other applications, only the user carries the whole risk for damages. General data Application : Propellant recovery Plant designation : Activated carbon recovery system Plant type : ACR-SYSTEM 23-1000 Year of construction : 2008 Technical data  ...

SNA-03. Other and Auxiliary Systems Air Technology Systems a) 1 unit Type Wolf KG 160/9391, functional, Built: 1991 b) 1 unit Type Wolf KG 40, functional, Built: 1991 c) 1 unit Type Eichelberger NSR 315, functional, Built: 1991, Rooftop system Manufacturer: Wolf Anlagen Technik GmbH Technical Data: a) 15,400 m³/h; 10 kW; 380V; 1500 rpm; 710 Pa b) 2,400 m³/h; 0.6 kW; 380V; 1500 rpm; 300 Pa c) 3,500 m³/h; 1 kW; 380V; 1500 rpm; 450 Pa Motors: a) 71M06 SIEMENS 1MA5163 4BB; 10 kW; 380V; 1500 rpm; 50Hz, Built: 1991 b) 71M08 Loher ENCV090 SB 84A; 0.6 kW; 380V; 1500 rpm; 50Hz, Built: 1991 c) 71M07 FLENDER ENGV160 MB02A; 10 kW; 380V; 1500 rpm; 50Hz, Built: 1991 Find more here - / Contact us at -

2. Other and Auxiliary Systems SNA-06. Air Technology System, 2 units WOLF KG 100, functional, Built: 1991 Manufacturer: Wolf Anlagen Technik GmbH & CO.KG Technical Data: 6750/6050 m³/h; 15 kW; 1500 rpm; 650 Pa Motors: 65M01 Wolf UD112M; 4 kW; 380V; 1500 rpm; 50Hz, Built: 1991 65M02 Wolf UD112M; 4 kW; 380V; 1500 rpm; 50Hz, Built: 1991 65M03 Wolf UD100LB; 3 kW; 380V; 1500 rpm; 50Hz, Built: 1991 65M04 Wolf UD100LB; 3 kW; 380V; 1500 rpm; 50Hz, Built: 1991 Additionally, 2 refrigeration compressors DWM Copeland, Built: 1992 Type DMRH 750EWM/000; Capacity 26.5 m³/h; 1550 rpm Find more here - / Contact us at -

2. Other and Auxiliary Systems SNA-19. Water Recooling System - Room E 06, Water Recooler 2 units Cooling Compressor Systems BOGE C7 (Screw Compressor), functional, Built: 2015 Manufacturer: BOGE GmbH Technical Data: - 5.5 kW; 380V - 8/13 bar - 0.9 m³/h - Intake capacity: 5-50 Mm³/h - Mass: 0.21 t Find more here - / Contact us at -

Manufacturer: Kohnle Model: Hardening System Year of Manufacture: 1995 Voltage: 400/230 V Frequency: 50 Hz Current: 220 A Power: 100 kW Find more here - / Contact us at -