48 MAKINO used machine for sale

Inv. Num. : 9172 Type: EDNC 65 Producer: MAKINO Created: 1998 Parameters: Max. travel length of the X-axis: 650 mm Max. travel length of the Y-axis: 450 mm Max. travel length of the Z-axis: 350 mm Maximum electrode weight: 100 kg

Key data: 500 mm, 1 mm, 500 mm

5-Axis CNC Vertical Machining Center with Pallet Pool Makino D500 Year of construction: 2011 Fanuc 310iS Professional 5 2-axis NC rotary and swivel table Erowa pallet handling system with 4 pallets Table size 400 x 400 mm C-axis 360° A-axis +30° ~ -120° X 500 mm Y 1,000 mm Z 500 mm Spindle speeds 300 – 3,000 rpm. 60-cavity tool magazine Offer number MV-6494

Hexagonal tower Dimensions 500 x 500 x 500mm Height 930 mm Base plate 630 x 630mm Grid 40mm Double angle dimensions: 630 x 200 mm, height 760 mm, base plate 630 x 630mm, grid 40mm Square tower Dimensions 400 x 400mm Height 930 mm Base plate 630 x 630mm Grid 40mm

Basic pallets for MAKINO A77 /81 Dimensions 630 x 630 mm with T-slot spacing 125mm Several available !

EDM machine Makino DUO64 vintage 2011.

Inv. Num. : 8267 Type: S56 Producer: Makino Created: 2009 Parameters: Control system: FANUC 310is Work table length: 1000 mm Work table width: 500 mm Maximum table load (uniform): 650 kg Maximum vertical spindle speed: 20000 1/min X-axis travel: 900 mm Y-axis travel: 500 mm Travel Z axis: 450 mm Cone: HSK-A63 Number of all tools: 30 pieces Machine height: 3063 mm Machine length: 3302 mm Machine width: 2570 mm Machine weight: 7500 kg

Key data: 900 mm, 500 mm, 450 mm

Inv. Num. : 7549 Type: F5 Produzent: MAKINO Erzeugt: 2013 Parametern: Steuerungssystem: FANUC Arbeitstischlänge: 1000 mm Arbeitstischbreite: 500 mm Anzahl der Stapelpositionen: 30 Stücke Anzahl der Achsen: 4 Stücke Maximale Vertikalspindeldrehzahl: 20.000 1/min Verfahrwege X-Achse: 900 mm Verfahrwege Y-Achse: 500 mm Verfahrwege Z-Achse: 450 mm Kegel: HSK 63 F Anzahl aller Werkzeuge: 30 Stücke Ausstattung: IKZ Werkzeughalter

Type: Die-sinking EDM machine Number: 21958 Category: Die-sinking EDM machines / EDM Manafacture: Makino Model: EDAF 3 Year of construction: 2016 Travel: 450 x 350 x 350 mm [ X x Y x Z ] Table size X: 700 mm Table size Y: 500 mm max. workpiece size X: 850 mm max. workpiece size Y: 650 mm max. workpiece size Z: 400 mm max. workpiece weight: 800 kg C-axis Linear scales (X,Y,Z) Control Hyper i Super Spark iV Super Surface Super Edge (incl. MF 4) Super Surface Graphite EROWA Robot Interface (A-Type)

We are selling a new unused but defective tool magazine with tool changer for a Makino PS 95. The magazine body was broken in two parts with a crane hook during unloading of the machine from its transport box. Also some tool pots are damaged. Can be repaired or used as spare parts

x-travel:650 mm y-travel:450 mm z-travel:420 mm control:MAKINO Hyper i U-axis:± 75 mm V-axis:± 75 mm max. size of workpiece LxWxH:1000 x 800 x 400 mm workpiece weight:max. 1500 kg Table dimensions:910 x 710 mm weight of the machine ca.:5 t Dimensions (L/W/H):3 x 3 x 2,3 mm Memory:10 GB Wire EDM in good condition.

size of pallet:400x400 mm numbers of pallets:15 table load:400 kg weight of the machine ca.:0,060 t dimensions of the machine ca.:0,4 x 0,4 m 15 pallets for Makino A 55, size 400 x 400 with T-slots for sale

table length:920 mm table width:600 mm ampere:13,2 A weight of the machine ca.:6 t dimensions of the machine ca.:2,46 x 2,24 x 2,33 m X-axis:600 mm y-axis:400 mm Z-axis:260 mm max. table load:1500 kg The dimensions for transport are: wide 2240 mm x high 2330 mm x deep 2460 mm weight approx. 6000 kg.

MAKINO EDNC 30F ist eine Senkerodiermaschine, ausgelegt für Präzisionsbearbeitung, hohe Genauigkeit und Zuverlässigkeit. Arbeitskapazitäten: Tisch 500 x 350 mm mit 4 T-Nuten (10 mm, Abstand 80 mm), max. Tischbelastung 500 kg; Verfahrwege X 300 mm, Y 250 mm, Z 250 mm; größtes Elektrodengewicht 50 kg; Dielektrikum 60 l (650 x 450 x 300 mm). Technische Hauptdaten: Eilgang 20 m/min; Anschluss 50 Hz 3x 400 V; Maschinengewicht ca. 4100 kg; Abmessungen 2800 x 2200 x 2300 mm. Ermöglicht enge Toleranzen; typische Einsatzbereiche: Automobil, Luft-/Raumfahrt, Medizintechnik, Uhrenindustrie, Werkzeugbau. Technische Daten ohne Gewähr

MAKINO V 33i Graphite ist ein 3-Achsen Bearbeitungszenter, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazitäten: Tisch 750×450 mm mit 4 T-Nuten 18H8 im Abstand 100 mm, max. Belastung 300 kg; Wege X650 Y450 Z350 mm; Werkstück max L750 B635 H250 mm. Technische Daten: Spindelaufnahme HSK E50 (Abstand Nase–Tisch 150–500 mm), stufenlos 300–30.000 t/min, max. Drehmoment 23,1 Nm; Spindel 17/13 kW; Vorschub 1–20.000 mm/min, Eilgang 20 m/min; Magazin 60 Plätze, Werkzeug-Ø max 80 mm, Länge 250 mm, Wechsel 4,8 s; 3×400 V 50 Hz, Druckluft 4–8 bar; Maschinengewicht ~7700 kg, Abm. 2330×2325×2600 mm, Gesamtleistung 50 kVA. Zubehör: Lampe, Ölnebelabsaugung, Spindelkühlung, Werkstücklader EROWA EASY ROBOT, Zustandsleuchte. Erreicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gew ...

MAKINO A 77-A 188 ist ein Bearbeitungszenter von hoher Präzision, großer Genauigkeit und hoher Zuverlässigkeit. Arbeitskapazitäten: 2 Tische (630x630 mm), Hub X 800 mm, Y 750 mm, Z 770 mm. Technische Daten: Werkzeugaufnahme HSK-A 100; Spindeldrehzahl 20–10.000 t/min; Spindelmotor 30 kW; Anschluss 50 Hz 3x 400 V; Gewicht ca. 18.000 kg; Abmessungen L6430 x B3650 x H3000 mm; Platzbedarf ~40/24 m2. Zubehör: Satz Werkzeughalter. Ermöglicht enge Toleranzen; Anwendung in Automotive, Luftfahrt, Medizintechnik, Uhrenbau und Maschinenbau Technische Daten ohne Gewähr

MAKINO A 77-A 188 is a Horizontal Bearbeitungszenter für Präzision, hohe Genauigkeit und Zuverlässigkeit. Anzahl Tische 2 (630×630 mm); Verfahrwege X800 Y750 Z770 mm; Werkzeugaufnahme HSK-A100. Spindel 20–10.000 t/min, Spindelmotor 30 kW; Anschluss 50 Hz 3×400 V. Gewicht ~18.000 kg; Abmessungen 6430×3650×3000 mm; Platzbedarf 40/24 m2. Zubehör: Satz Werkzeughalter. Eignet sich für enge Toleranzen; Branchen: Automotive, Luftfahrt, Medizintechnik, Uhrenindustrie, Maschinenbau Technische Daten ohne Gewähr

MAKINO A 88e-A 188 ist ein Horizontal Bearbeitungszenter für hohe Präzision, Genauigkeit und Zuverlässigkeit. Kapazität: 2 Tische 630x630 mm; Wege X 800 mm, Y 750 mm, Z 770 mm; Werkzeugaufnahme HSK-A100. Daten: 20–10000 t/min (stufenlos), Spindelmotor 30 kW, 50 Hz 3x400 V; Gewicht ~18000 kg; Abmessungen L6430 x B3650 x H3000 mm; Platzbedarf ~40/24 m2. Zubehör: Satz Werkzeughalter. Erreicht enge Toleranzen; typische Branchen: Automotive, Luftfahrt, Medizintechnik, Uhrenbau, Werkzeugbau. Technische Daten ohne Gewähr

vertical machining center, year 2000, CNC SISTEMA PRO 3. Used machine in good condition. More info & price on IndustrialBuyer.

table length: 750 mm table width: 550 mm ampere: 60 A Control: Makino MGE20 x-travel: 600 mm y-travel: 400 mm z-travel: 250 mm workpiece weight: 450 kg tool change unit: 8 total power requirement: kW weight of the machine ca.: 5,00 t dimensions of the machine ca.: 3,00 x 3,50 x H3,00 m Die-sinking machine with control MAKINO MGE20 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 900 mm y-travel: 800 mm z-travel: 970 mm Control: Fanuc type: PRO-3 tool taper: HSK 100 power capacity: 30 kW turning speeds: 12000 U/min rapid traverse: 50 m/min Tool changer: 90 Pos. Cooling through the spindle: 70 bar size of pallet: 630x630 mm Table load: 1200 kg rotary table tiltable: 1 Grad type of pallet-changer: 2 total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: m Special features: Tool magazine for 90 HSK-A100 short-taper tools 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Dual pallet changer Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- bindi ...

x-travel: 800 mm y-travel: 750 mm z-travel: 770 mm Control: Fanuc type: PRO-3 tool taper: HSK 100 power capacity: 30 kW turning speeds: 10000 U/min rapid traverse: 35 m/min Tool changer: 90 Pos. Cooling through the spindle: 70 bar size of pallet: 630x630 mm Table load: 1200 kg rotary table tiltable: 1 Grad type of pallet-changer: 2 total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m Special features: Tool magazine for 90 HSK-A100 short-taper tools 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Dual pallet changer Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- bindi ...

x-travel: 800 mm y-travel: 750 mm z-travel: 770 mm Control: Fanuc type: PRO-3 tool taper: HSK 100 power capacity: 30 kW turning speeds: 10000 U/min rapid traverse: 35 m/min Tool changer: 90 Pos. Cooling through the spindle: 70 bar size of pallet: 630x630 mm Table load: 1200 kg rotary table tiltable: 1 Grad type of pallet-changer: 2 total power requirement: kW weight of the machine ca.: 15 t dimensions of the machine ca.: m Special features: Tool magazine for 90 HSK-A100 short-taper tools 70 bar high-pressure coolant system Indexable rotary table swivels in 1° increments Pallet size 630 x 630 mm Maximum table load 1,200 kg Hydraulic power unit for fixture clamping system Fanuc Pro-3 control system Automation: Dual pallet changer Tool breakage detection Automatic workpiece measurement with Marposs touch probe The tech. Data are manufacturer or operator information and therefore non- bindi ...

This 5-axis Makino U6 HEAT was manufactured in 2016. It features an impressive X-axis travel of 650 mm, Y-axis travel of 450 mm, and Z-axis travel of 420 mm. The machine has a maximum workpiece size of 1,000 x 800 x 400 mm and can handle a maximum workpiece weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Makino U6 HEAT wire EDM machine we have for sale. Contact us for further details.

This 3-axis Makino SNC 64-A15 was manufactured in 2001. It features a main spindle speed ranging from 300 to 30,000 rpm and a spindle motor power of 15 kW. The machine is equipped with a tool magazine holding 15 positions and offers a feed rate of up to 16,000 mm/min. If you are looking to get high-quality graphite and metal machining capabilities, consider the Makino SNC 64-A15 vertical machining centre we have for sale. Contact us for further details.

control: FANUC 16 MA-Pro 3 Number of axles: 4 St. x-travel: 900 mm y-travel: 800 mm z-travel: 970 mm b-axis: 0.001 ° size of pallet: 630 x 630 mm tool piece magazine with: 244 milling spindle: HSK100 spindle turning speed - stepless: -12000 U/min chip conveyor: kW misc. accessories: weight of the machine ca.: 20 t dimensions of the machine ca.: 6.5 x 3 x 3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 800 mm y-travel: 750 mm z-travel: 770 mm Control: FANUC Prof 3/A rapid travel x/y/z: 30000 mm/min palets changer: 630 x 630 table weight: 1200 Kg spindle speed:: 14000 U/min spindle taper: HSK A 63 spindle motor: 30/25 kW tool change unit: 40 pos distance spindle center to table: 100-850 mm Internal cooling system: weight of the machine ca.: 17 t dimensions of the machine ca.: 7,9 x 4,2 x 3,3 m Equipped with: - Fanuc Professional 3/A CNC control - Coolant through spindle - Pallet changer - Tool changer (HSK-A63) - Knoll coolant system (renewed) - Chip conveyor - Mütek briquette press (2015) The machine has been used reliably in single-shift operation in recent years, operating hours: Spindle hours: The scope of delivery includes numerous HSK-63 tool holders – both those currently in the machine and a complete Euro pallet with additional tool holders. - Two clamping towers  ...

This 3-axis Makino EDNC 30 die-sinking EDM machine was manufactured in 1998. It features travel paths of 300mm in X, 250mm in Y, and 250mm in Z, a table size of 500 × 350 mm, and can handle a maximum workpiece weight of 500 kg. Consider the opportunity to buy this Makino EDNC 30 die-sinking EDM machine. Contact us for more information about this machine.

This 3-axis Makino V55-A15 vertical machining center was manufactured in 1998. It features a CNC FANUC PROFESSIONAL 3 control system, a table size of 1000 x 500 mm, and a spindle speed of up to 15000 rpm. X, Y, Z travels are 900, 500, and 450 mm respectively. Includes a conveyor. If you are looking to get high-quality milling capabilities consider the Makino V55-A15 machine we have for sale. Contact us for more information.

x-travel: 1000 mm y-travel: 1000 mm z-travel: 950 mm Control: FANUC Pro-3 feed X/Y/Z/-axis: 1 - 50.000 mm/min rapid traverse X/Y/Z: 50,00 m/min tool taper: HSK-A 100 turning speeds: 20 - 12.000 U/min spindle drive: 25 / 30 kW torque milling spindle: 420 Nm spindle diameter in front bearing: 110 mm B - axis: 360 x 0,001 ° size of pallet: 2x 800 x 800 mm table load capacity: 1.800 kg dimension of workpiece: 1.000 x 950 mm workpiece height max.: 1.000 mm tool piece magazine with: 188 tool length - max.: 475 mm tool diameter: 320 mm weight of tools max.: 20,00 kg total power requirement: 65,00 kW weight of the machine ca.: 30,00 t dimensions of the machine ca.: 8,00 x 5,30 x H3,50 m Horizontal machining center with FANUC Porfessional 3 control, NC rotary table, el. handwheel, chip conveyor, coolant filter KNOLL VRF 450/2300, through-spindle coolant, 188-station tool magazine. New spindle in ...

Used machine in good condition. Available for immediate delivery. - Number of tool stations: 30 - Control: CNC - Max. workpiece weight: 17.600 kg - Max. tool weight: 66 kg - Axes: 4 - Weight: 77.175 - Dimensions (long x wide x high): 1.501 x 1.300 x 1.000 mm