4 MATEC numerically controlled machining centres used machines

Control: Heidenhain iTNC530 Travel: X-axis: 4,000 mm Y-axis: 1,200 mm Z-axis: 1,300 mm Horizontal A-axis: 0-135° B-axis: +-106° NC rotary table: 1,250 mm with 50 rpm Fault circuit Ø: 1,600 mm, 50 rpm with Tork drive Tool magazine: 60-fold Tool holder: HSK 100 Motor spindle: 15,000 rpm / 90kW Accessories -Conveyor - 5-axis simultaneous package - Last major maintenance in 2023 -Suction - IKZ 70 bar - 3D probe with radio - Tool breakage detection - Handwheel with radio HR 550 FS

GENERAL Project No.: 905808 Quantity: 1 pcs. Manufacturer: MATEC Type: 30-HV Control: Heidenhain iTNC 530 Year of Make: 2004 Condition: Used machine Approx (hrs): 54117 Program run approx. (hrs.): 14875 Approx. (hrs): 35997 DESCRIPTION MILL 4Axles Travel in X 2000 mm Travel in Y 600 mm Travel in Z 800 mm Tool holder SK 40 Max. speed milling spindle 12000 1/min Milling head automatically swivels 1 degree Chain tool magazine 48 stations Table size 2500x700 mm Interface 4th axis Clamping hydraulics OTHER EQUIPMENT Splash protection cladding with fully encapsulated working area Lighting in the work area Partition wall for pendulum machining Oil/Emulsion Mist Extraction System Hinge belt chip conveyor Internal coolant supply Coolant device with paper belt filter Machine condition light GENERAL TECHNICAL DATA Machine dimensions (LxWx ...

Key data: 3000 mm, 800 mm, 800 mm

For sale Matec vertical machining center type 30 HV. Equipped with a Heidenhain and TNC 530 controller. This machining center also has a swivel head: 1-axis swivel head, infinitely variable, +/- 105°. Equipped with a chip conveyor with left ejection, and high pressure pump with fine filter installation. In very good condition. With machine clamps and tool holder SK-40 holder.

Key data: 2000 mm, 600 mm, 700 mm

5 Axis CNC Machining Center Manufacturer Matec Type 30 HV Year of construction 2013 Control Heidenhain iTNC530 Simultaneous Travel X/Y/Z 2000/600/700mm NC Rotary Table D=950mm Load 1200kg max. speed 18,000 rpm Tool magazine 48-fold IKZ 26bar Automatic tool measurement Tool breakage detection 3D wireless pushbutton m & h Electric Handwheel HR410 Chip conveyor Control at 33344h Program run 11291h The machine is in TOP condition, technically and geometrically very good.

Manufacturer: Matec Model/Type: 30 L Year of Manufacture: 2004 Power Requirements: - Voltage: 400V - Power Consumption: 62 kW Find more here - / Contact us at -

Manufacturer: Matec Model: 30 HV Year of Manufacture: 1997 Type of Machine : 5-axis CNC vertical machining center - Well-maintained condition. - Working area: X = 2000 mm, Y = 600 mm, Z = 800 mm. - Equipped with rotary table Ø310 mm. - Swivel head with 1° Hirth toothing. - Heidenhain TNC426 control unit. - SK40 spindle with 12000 rpm. - Tool magazine with 24 positions. - Vacuum clamping plate dimensions: L = 1250 mm, W = 630 mm, with 8x8 mm grid and 5 mm groove. - Side opening for inserting long parts. Find more here - / Contact us at -

This 5-axis Matec 30 HV CNC milling machine was manufactured in 2000. It features a milling spindle with a speed range of 20-9,000 rpm and a drilling capacity in St 60 of 60mm. The machine boasts large travel distances with X-axis at 4000 mm, Y-axis at 825 mm, and Z-axis at 1100 mm. It supports a maximum table load of 4000 kg. If you are looking to get high-quality milling capabilities consider the Matec 30 HV machine we have for sale. Contact us for more information.

This 4-axis Matec 30 L gantry milling machine was manufactured in 1998. Consider the opportunity to buy this Matec 30 L gantry milling machine. Contact us for more information.

This 4-axis Matec MATEC 30 HV/K was manufactured in 2007, featuring a robust vertical machining center design. It includes a Rexroth control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information.

This 5-axis Matec 30-HV was manufactured in 2009, featuring a versatile universal machining center with a large X-axis travel of 3000 mm and a Y-axis of 600 mm. It includes a high-speed range up to 12,000 rpm, a tool magazine for 36 tools, and a high-pressure cooling system (70 bar). Ideal for complex 3D machining with its powered CNC rotary table and Heidenhain iTNC 530 control. Contact us for more information about this machine.

This 3-axis Matec 30 HV was manufactured in 2013. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 600 mm, and Z-axis travel of 800 mm. The machine includes a maximum clamping weight of 1200 kg and a maximum spindle speed of 8,000 rpm. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV vertical machining centre we have for sale. Contact us for further details.

This 4-axis Matec 30 HV vertical machining centre was manufactured in 2012. It features a generous X-axis travel of 3000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle, capable of speeds up to 9000 rpm, and a maximum table load of approximately 2500 kg. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV machine we have for sale. Contact us for further details.

Matec 30 HVKYear of manuf. : 2012 Control : Siemens 840 D Speed : 12000 rpmMovement X/Y/Z : 1300/600/800 mmTool holder : HSK 63 ____________Description:In General:Year of manufacture:2012Control system:Siemens 840 DTraverse X/Y/Z:1,300/600/800 mmSpindle speed:12,000 rpmSpindle:Technology:Direct drive spindleSpeed:12,000 rpmPower:30 kWTorque:191 NmTool holder:HSK 63NC swivel head:B-axis:+/- 105°Clamping torque:4,200 NmNC rotary table:C-axis:360 °Drive:Direct drive (torque)Clamping surface:630 mmTorque:600 NmMax. table load:1,000 kgTool magazine:Technology:Chain magazineTool changer:Double gripperNumber of stations:48Tool diameter max.:70 (130) mmTool length max.:340 mmEquipment:Position sensors:Direct scalesChip disposal:Chip conveyorCoolant supply:Internal coolant system, 40 barWorkpiece measurement:Renishaw Touch probeTool measurement:Blum LaserEmulsion mist separator:LTA, e ...

Robust snow plough/bulldozer shield/shield combined with Hardox segment scrapers with plate suspension. Softer suspension available for pure snow removal. Shield can be shortened to 1500 mm width and reduced in height. Re-insertable for rolling the snow on top. Plastic scrapers for asphalt protection available as an option. Adapter plate for attachment to tractor, truck, etc. included in the price. For attachment to wheel loader and forklift, or front three-point height adjustment can be omitted (low price). technical data: - Shield width 2600 mm can be shortened to 1500 mm, widened up to 3600 mm - asymmetric design possible - Clearance width at 36 slants: 2100 mm - Height 875 mm (minimum height 670 mm) - Total length with adapter 1120 mm - hydr. Hug 300 mm - extremely stiffened for earth movement, gravel, food, debris, etc. - Scraper slurs segmented with plate suspension, o ...

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...

Drum chipper with 2-blade rotor, 2 counter blades, interchangeable mesh screen Infeed height 400 mm Infeed width 1690 mm 1 large feed roller above 3 smaller feed rollers down Drive electric engine 55 kW (up to 200 kW upgradeable) suitable for round timber, sawmill waste, waste wood, etc. with loading with vibro channel length 6 m, vibro drive MATEC size 3, 4 kW Disposal with vibro sieve tray length 4 m, vibro drive MATEC size 1, 3 kW for oversize feedback with -MATEC Vibrair vibrochannel pneumatical -PVC belt conveyor for returning oversized material to the chipper Machine in almost new condition, only a few hours of operation Electric plant to customer demand and allocation Warranty 24 months on all non - wear parts Contact Peter Ari Schär of MATEC Technical changes, errors and intermediate sale preserved!

MATEC easily from our own development and production running lightly and quietly and transport bulk material and individual loads up to 250 kg with minimal energy over long distances up to 12 m at a time with a hand drill 300 w power consumption. The combined forced - and promotion of resonance stores the kinetic energy in the spring and must compensate for only the frictional resistance of the material. Sawdust, shavings, gravel, Earth, grain, hay and grass, etc. are exactly same speed transported with approximately 17 m / min. by means of Frequenzumforner the speed can be adjusted. The transport and screening in a single operation with a built-in sieve base perforation on request MATEC Vibrorinne standard Trough width inner 500 mm Trough height inner 260 mm current trough length 2500 mm (can front and rear to 1.5 m be extended without additional support) In addition current ...

The ECOSTAR 8 slices hacker with diesel drive 35 HP, 3 cyl., with an increased swivel discharge for horticulture, wine fruit, forestry, agriculture, etc. at a cheap price. With 2 blades, disk diameter 605 mm, disc speed 1200 rpm, JD diesel engine 3100, 3 cyl, 35 HP, water-cooled, feed height 200 mm, max wood diameter 200 mm, Einzugbreit 225 mm, hopper opening 600/600 mm, output per hour 5-8 cubic metres. The machine is ready for use within 1 minute. The chips can easily be abandoned on the bridge of the towing vehicle. The tedious tying of the branches fall away. Take the chips only 1 time in the hands. Watch the video movie in matnews91 on YouTube: ECOSTAR diesel JD3100 8. Price does not include trailer euro 9' 390.00 Expressly subject to technical changes, prior sale and error! Shipping costs CH / DE trucked approximately euro 280.00 MATEC systems + technology GmbH K ...

Wood chopper f. tractor PTO wood chipper ECOSTAR 8 as a kit for the self-Assembly (image mounted with other rotating device) - feeder height width 20/20 cm - upper feed roller with belt drive - disk hacker with 2 knives and 1 counter knife - rated about 5 cubic metres chip length nominal 15 mm - CE compliant - PTO - rotating ejector - delivered in metal crates -Warranty: 2 years on all non - consumable - options for an additional fee: - machine Assembly by supplier - pulverizing integrated to avoid excess - special execution for the manufacture of Pelletschnitzeln with 6 mm length - professional Rotary chute which together does not rust and freezes at Sub-zero temperatures, with lever - built diesel drive 35 HP - electric motor 15 kW model changes built up which are not exactly the figurative representation are reserved! Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfe ...

The MATEC HMS-350 Kleinshredder for professionals, with hammer mill is suitable for crushing of green waste, etc. All types of green waste such as bouquets, garden waste, potted plants, compost in each State, agricultural waste, Earth, cemetery waste, large wood chips and small wood waste, etc. can thus be crushed. The hammer mill is equipped with impact tools made of HARDOX, the appropriate anvil blow bar and the following "data" also made of HARDOX. The content of flower pots, flower boxes, "baked together" grass cutting, etc. can thus be crushed. The combination of anvil blow bar before calibration and subsequent anvil calculation for fine crushing results a high throughput capacity with a small expenditure of energy. Electric motor 7.5 kW, a diesel engine can 3x400V, 50 Hz, power outlet connection euro 32 A request be built up 350 mm diameter insertion slot flight circle diame ...

Vibrorinne MATEC vibrating mesh drive 4 4 kW, 3 x 400 V 50 Hz Pan nominal width 600 mm Gutter inner width 500 mm Trough depth 260 mm Extra deep OK built channel 480 mm Gutter length approx. 11'000 mm Transport speed nominal approx. 17 m / min Year 2018 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Vibrorinne MATEC drive rear Overtime separation and â?? repatriation Vibro Drive 1 electric motor 3 kW Linder nominal width inside 500 mm Preparing for 1700 mm Linen nominal length 4000 mm Peasant sheet seal unit perforation 20 mm Weight about 560 kg Built in 2018, new The machine is in very good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

MATEC ZRP 320 Inox Pharma gear pump with sep. Fans for exact delivery quantities MATEC gear pumps are very precisely made of high-quality material. The pumps have been specially designed for the promotion of gel-like media of the pharmaceutical and food supplement industry in the viscosity area 2500-4000 MPas developed. The slanted gears guarantee a quiet, pulsation-free and precise transport. With the help of frequency converters, the flow rate can be adjusted exactly to the current demand and the motor can be controlled from normal 50 Hz frequency down to 1 Hz or up to over 80 Hz. The almost leak-free operation allows an exact dosing conveying without empty pump operation. This preserves the quality of the medium. Pump heatable with 2 el. Heating cartridges up to 100°C, temperature sensor, temperature control unit new Spare Parts/Service MATEC CH-4952 Eriswil/EN-79618  ...

MATEC Stappler tipping bucket type 2 The tipping bucket can be locked with a bolt with cotter pin so no tipping is possible. The tipping buckets can be supplied also with a hydraulic tilting device. The blades are 1950 mm wide and type 2 1300 mm deep. The standard blade height is 450 mm. Solid wall or lattice towers can be ordered as accessories. The nominal weight of the shovel is 2000 kg. Each blade has 4 lifting eyes for crane handling. 4 mm thickness, corners and a replaceable wear bar reinforced permit prospecting. Other blade dimensions are possible upon request. Year 2017 New machine Spare parts/service MATEC CH-4952 Eriswil/DE-79618 Rheinfelden Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041  ...