MC INTYRE jmc used machines

Manufacturer: Mc Intyre Knife length: 508 mm Opening of measurement: 250 mm Cutting capacity: 120 tons Round iron ST 37: 67 mm diameter Number of strokes at 1/4 opening: 100 per minute Number of strokes at full opening: 20 per minute Dimensions ( L x W x H ): 1650 x 915 x 1490 mm Weight: 1143 kg Drive: 7.5 kw / 400 V Operation: foot pedal Alligator scissors JMC 500 HD The JMC 500 HD has a hydraulic holder. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket.

Alligator scissors JMC 640-240 with hydraulic holder (Used machine) The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Manufacturer: Mc Intyre Knife length: 640 mm Measuring opening: 355 mm Cutting capacity: 240 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 opening: 60 / min Dimensions (LxWxH): 3200x1000x1800 mm Weight: 4000 kg Drive: 18.5 kw /400 V +1.5 kw Electric motor cooler Operation: foot pedal

Used JMC 407 Kat Alligator Scissors Alligator scissors JMC 407Cat The catalyst version JMC 407 has an additional "V-holder" in the cutting area for adjustment when cutting or opening the catalysts. In stock at the end of March 2021 Knife length: 407 mm Measuring opening: 250 mm Cutting capacity: 90 tons Round iron ST 37: 57 mm diameter Number of strokes at 1/4 opening: 63 / min Number of strokes at full opening: 11 / min Dimensions (L x W x H): 1550 x 880 x 1120 mm Weight: 880 kg Drive: 7.5 kw / 380 V Operation: Foot pedal

The JMC 150 has a mechanically adjustable hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. The JMC 150 is a tabletop unit for easy handling. Manufacturer: Mc Intyre Knife length: 150 mm Measuring opening: 105 mm Cutting capacity: 25 tons Round iron ST 37: 25 mm diameter Number of strokes at 1/4 aperture: 20 / min Number of strokes at 1/2 opening: 12 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal

JMC 900 alligator shears (new machine) The JMC 900 has a hydraulic hold-down. The scissor head is operated with a foot pedal for individual cuts or continuous cutting. The scissor head is protected with a safety basket. Out of stock Delivery time: On request Manufacturer: Mc Intyre Knife length: 920 mm Measuring opening: 473 mm Cutting capacity: 233 tons Round iron ST 37: 88 mm diameter Number of strokes at 1/4 aperture: 26 / min Number of strokes at full opening: 9 / min Dimensions ( L x W x H ): 3200 x 1030 x 1800 mm Weight: 4400 kg Drive: 18.5 kw / 400 V + 1.5 kw electric motor cooler Operation: Foot pedal

JMC 407 overhauled new model / young device Drive: 7,5 KW Weight: 880 kg 4 x reversible knives Truck intake/wheels

Out of stock, we offer spare parts for McIntyre alligator scissors. Main wearing parts such as blades for JMC 150, JMC 200B, JMC 320; JMC 407, JMC 500, JMC 600, JMC 640, JMC 900. In addition you will find control blocks, hoists, foot control, springs, screws for the knife sets, adjusting screws on the knife sets, adjusting screw cutter with brass wear plate, electric box next to other parts always in stock. Inquire. We help in the short term. Also express shipping possible. By phone at 02824/4193

Demonstration machine Manufacturer: Mc INTYRE Dimensions (L x W x H): 3200 x 1000 x 1800 mm Blade length: 640 mm Blade opening: 355 mm Cutting capacity: 240 tons Rods ST 37: 88 mm diameter Number of strokes at ¼ opening: 60 / min Number of strokes at full aperture: 8 RPM Weight: 4000 kg Drive: 18,5 kw / 400 V Control: foot pedal

The JMC 320 has a mechanically adjustable holders. The cutting head is operated for single cutting or continuous cutting with a foot pedal. The cutting head is protected by a safety cage. Blade length: 320 mm Blade opening: 180 mm Cutting capacity: 67 tons Rods ST 37: 50 mm diameter Number of strokes at area opening: 70 / min Dimensions L x W x H: 1370 x 720 x 1280 mm Weight: 660 kg Drive: 7.5 kW / 380 V Control: foot pedal

Weight: 1600 kg Bj.new Very nice state of use Package dimensions: 20 x 35 x material quantity Hand control To compress copper, aluminum, zinc, etc. Immediately available. More pictures on request, are not the original pictures!! Year built: new Weight: approx. 1600 kg Built in: 1997 mechanical condition: very well dimension of the baling press: 20 x 35 x l ength of the material to press manual control materials to press: copper, aluminium, zinc etc. The machine is on stock. Every time we have 8 cablestrippers on stock. new an second-hand machines

Recycling machine trade AGICOM-Pedergnana OG:The JMC 200 has a mechanically adjustable counter holder. The scissor head is operated with a foot pedal for single cuts or continuous cutting. The scissor head is protected with a safety cage. Overall dimensions: L 1100 x W 600 x H 1400 mm Total weight: approx. 550 kg Knife length: 203 mm Max. knife opening: 140 mm Cutting force: 52 tons Cutting capacity: round bar 38 mm diameter (ST 37) Main drive: 3 phases: 4 kW Cutting strokes p/min.: up to 20 / min

AGICOM recycling machine trade: Small alligator shears JMC 150 overhauled by the manufacturer, benchtop device, ready for immediate use! Manufacturer: Mc Intyre Knife length: 150 mm Knife opening: 105 mm Cutting capacity: 25 tons Dimensions ( L x W x H ): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Operation: Foot pedal

The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient blade length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, pipelines, motors, cables or gearbox housings. The shears are also often used for cleaning scrap metal or cutting vehicle radiators. The machine has a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. Using the foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted using simple clamping screws. The scissors are from our demonstration pool and can of course be viewed or tested. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

Key data: 999 KW, 1625 kVA, 400 V

AVAILABLE FROM SEPTEMBER! Dear Ladies and Gentlemen, We hereby offer the following a JENBACHER JMS320 in a container for rent ! This efficient and freshly overhauled container from the Jenbacher brand is available to you just in time. Year of manufacture 2018 x Starts: 1310 x Hours: 24462 BH. Electrical Power: 999KW Thermal power 1165 KW Dimensioning: Thickness: x mm insulation Length: xmm Width: xmm Height: x mm Livery Jenbacher Green RAL6018 Contents in the container: Jenbacher JMC320 Combined Heat and Power Plant Heating system x Plate Heat Exchanger x Control cabinet x Gas regulator x Static Power Supply x Exhaust silencer external x Auxiliary silencer above the container Insertion loss 65dBA in 10m x Data Recording x Gas blower Combimac blue 65mbar Gas pressure x Gas flow meter x Gas vacuum switch x Return temperature increase x Exhaust g ...

AGICOM recycling machines: JMC 407 alligator shears The most used alligator scissors from Mc Intyre Mechanically adjustable hold-down device Machine on casters Ideal for shredding automotive scrap, transmission housings, cylinder heads and iron parts Machine in stock

Complete plant Jenbacher JMC 320 GS-L biogas installations available. 2 Jenbacher units in 40 ft containers, power: 2 × 1,550 kVA. Year: 2009. Control panels: DIA.NE. XT and DIA.NE. XT4. 60,000 operating hours after overhaul. Full maintenance carried out by Jenbacher. If you'd like, I can also format this as a more commercial offer description. Loaded Now Departure France

Manufacturer: Mc INTYRE Blade length: 150 mm Blade opening: 105 mm Cutting capacity: 25 tons Rods ST 37: 25 mm diameter Number of strokes at ¼ opening: 20 / min Number of strokes at ½ opening: 12 / min Number of strokes at full aperture: 9 / min Dimensions (L x W x H): 660 x 520 x 620 mm Weight: 150 kg Drive: 1.5 kw / 230 Volt Control: foot pedal

McIntyre 407 CAT Shear Designed to recover the precious metals found in Catalytic converters, JMC Cat shears also versatile enough to be used anywhere in your yard. Purpose Built McIntyre Cat shears have been purpose built for recovering precious metals from catalytic converters. The Catalytic converter is simply placed in the jaws and cut. The movement of the jaw is directly controlled by the moveable foot pedal and a V clamp holds the Cat in place during cutting. Once cut, the pinched end of the converter can be re-opened using the side bracket attached to the top jaw, allowing the contents to be poured out.

McIntyre 500 CAT Shear The 500 CAT is designed for those needing just a bit more blade length without an equivalent increase in price. Versatile The 500 CAT gives customers just a bit more blade length without a big price increase. It is powerful enough to handle most non ferrous cleaning and sizing operations, and can also be fitted with an optional bracket enabling it to assist when processing catalytic converters. Long-lasting In common with all JMC shears, the 500 CAT has been designed and built to last. Blades are deep hardened for extended life, hardened chrome rod is used in the hydraulic ram, and components are all choiceed according to their quality over and above their price.

McIntyre Alpack 2000 Automatic Can Sorter The McIntyre Alpack 2000 Automatic Can Sorter provides an inexpensive way of separating large volumes of steel UBCs from high value aluminium cans Efficient, versatile, cost-effective The McIntyre Alpack 2000 Can Sorter can work both independently or be coupled with a JMC Baler to provide a complete sorting and baling system. Alpack 2000 is able to give almost 100% separation of aluminium from steel.

McIntyre 5025SB Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong and reliable In line with all JMC machines, the 5025SB has been designed and built to last. The first 5025SB was built over 20 years ago and is still in constant daily use. The 5025SB has cutting blades around all three sides of the box so can handle oversized material. It has a fast cycle time and would be a valuable asset to any metal recycling facility.

Heat and Power Plant with an Absorption Chiller An 850 kW combined heat and power plant with an absorption chiller. The systems ran perfectly until the end and all maintenance was carried out. No damage is known. The CHP ran for 51,429 hours of operation. The absorption chiller has run for 42,350 hours. The following components use an overhauled long block* or completely overhauled. The components relevant to assemblies for "modernization" were marked: - complete panelling* - Interfaceschronk* - Oil relubrication pump Mechanically overhauled and electrically tested - Oil level monitoring - Plotter heat exchanger" - Pressure expansion foll3 (if present) * - Pressure transducer and temperature sensors * - Rubber rails for motor and generator* - Clutch element * - Air filter inserts * - Safety valves and arnot inserts * - Sylomer strips * - Hot water preheating pump and  ...