8 MEBA band saws used machines

Execution semiautomatic 90° diameter: 600 800 x 600 mm Engine: 14,5 kW Blade: 9000 x 67 x 1, 6 mm Min. diameter: 10 mm Working height: 630 mm Weight: 4.3 to.

: 15-150 m/min capacity 90 degrees: round: 325 mm capacity 90 degrees: flat: 500 x 300 mm capacity 45 degrees: round: 300 mm capacity 45 degrees: flat: 300 x 300 mm : 200 mm : 200 x 200 mm dimensions of saw-band: 4200 x 34 x 1,1 mm : 60 mm : 165 mm min. dia.: 5 mm work height max.: 750 mm total power requirement: 3 kW dimensions: 1300 x 2050 x 1400 mm weight: 910 kg Standard equipment: - Fast miter adjustment from 90° to 30° stepless to 0.5° accuracy according to scale. The miter turning point is the point of intersection between saw band and Material system, thereby no change in the length dimension - At each angular position of the saw frame, the material is parallel in 90° tightened - Complete coolant device with electric submersible pump - Machine stand with chip collecting tray - Precise saw band carbide roller guide, saw blade brush - 1 saw blade on machine 4-6 ZpZ - MEBA high  ...

saw band length: 4400 x 34 x 1,1 mm band speed: 15 - 150 m/min capacity 90 degrees: square: 500 x 335 mm capacity 90 degrees: round: 335 mm : 330 mm : 320 x 335 mm : 305 mm : 305 x 335 mm : 180 mm : 170 x 335 mm work height max.: 750 mm Motor Capacity: 3 kW machine weight ab.: 1320 kg dimensions: 1450 x 2350 x 1950 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hello here we offer you a used semi-automatic metal band saw / band saw from MEBA !! Type : 230 GA-H Year of manufacture : ca 2007 Good condition, The machine was in a training workshop. The sale of this machine is only made to tradesmen or entrepreneurs. A visit is possible. Technical data are copied from the manufacturer, so without guarantee of 100% accuracy !! Automatic band saw Metal band saw Meba 230 GA-H with mitre cut. Automatic band saw Meba 230GA-NC Technical data: Manufacturer: Meba -Type:230GA-H -BJ. Approx. 2006-2007 (estimated) -with control (automatic) -with coolant pump -mitre cut possible -weight approx. 400kg -2 speed levels -high current -cutting range 230mm (see photo)

cutting diameter: 240 mm saw band length: 2910 x 27 x 0,9 mm cutting width: 310 mm table height: 900 mm : 35 + 75 m/min : 1,1/1,8 kW : 470 kg : 800 x 1720 x 1450 mm Manufacturer no. 20437 Description: - Miter cuts left 60° and right 45° - Quick-action clamping stick can be moved in the T-slot for quick position changes - Hydraulic brake cylinder - Large ball-bearing turntable for easy miter adjustment (durable) - Chip clearing brush - Machine base with automatic cooling system - Lockable main switch, emergency stop separately - EMC (Electromagnetic Compatibility), UVV - Current consumption display (saw band wear history, tool monitoring) - Automatically more performance with the proven Berg & Schmid 3-stage AutoCut system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 4200 x 34 x 1,1 mm capacity 90 degrees: round: 320 mm capacity 90 degrees: flat: 500 x 300 mm : 320 mm : 310 x 310 mm : 200 mm : 200 x180 mm : 280 mm : 300 x 230 mm cutting speed: 18 - 115 m/min total power requirement: 4,5 kW weight of the machine ca.: 1.100 kg dimensions of the machine ca.: 14850 x 2250 x 1300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 410 mm saw band length: 5800 x 41 x 1,3 mm table height: 750 mm capacity 90 degrees: flat: 700 x 410 mm capacity 45 degrees: round: 410 mm capacity 45 degrees: flat: 500 x 410 mm capacity 45 degrees: round: links 410 mm capacity 45 degrees: flat: links 430 x 410 mm capacity 30 degrees: round: 320 capacity 30 degrees: flat: 320 x 410 : 15 - 150 m/min workpiece weight: max. 250 kg/m kg : 5,5 kW : 3200 kg : 4500 x 2800 x 2000 mm - The ergonomic panel control can be networked and offers various options Option packages * Teleservice for remote maintenance * Setting sawing programs in the AV * Import of sawing programs from CAD with DSTV interface and data export - Automatic material feed: - In a compact design for shorter sections or with flexible insertion tongs Available in almost all lengths - Exact positioning of the material using servo positioning technology - Pioneeri ...

cutting diameter: 325 mm saw band length: 4200 mm cutting width: 500 mm : 15 - 150 m/min. work height max.: 750 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 4200 x 34 x 1,1 mm capacity 90 degrees: round: 325 mm capacity 90 degrees: flat: 500x300 mm : 300 mm : 300x300 mm : 200 mm : 200x200 mm weight of the machine ca.: 1250 kg dimensions of the machine ca.: 2250 x 2100 x 1280 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 230 mm cutting speed: 35 - 70 m/min cutting width: 260 x 200 mm : mm saw band length: 2720 x 27 x 0,9 mm total power requirement: 1,1 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 1,8 x 1,8 x 1,6 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 335 mm capacity 90 degrees: flat: 500 x 335 mm capacity 45 degrees: round: 330 / 305 mm capacity 45 degrees: flat: 320 x 335 / 305 x 335 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: flat: 170 x 335 mm saw band length: 4400 x 34 x 1,1 mm Control: SIEMENS speed: 15 - 150 m/min work height max.: 750 mm material layer: max. 250 kg/m coolant tank capacity: 80.0 ltr. oil volume: 30.0 ltr. power capacity: 5.5 kW weight of the machine ca.: 1980 kg range L-W-H: 2900 x 2350 x 1900 mm ** current new price approx. 80.000 euros ** special price on request Equipment: - MEBA double mitre bandsaw - fully automatic - with electric miter adjustment via servo motor * Adjustment right up to 60° / left up to 45° - Material feed 0 - 600 mm // with multiple feed 0 - 9999 mm - Infinitely variable lowering speed 0-300 mm/min - Saw blade speed via frequency-controlled AC drive (1 ...

cutting diameter: 335 mm saw band length: 4400 mm table height: 750 mm : 500 mm : 335 mm : 500 x 335 mm : re. 330 li. 305 mm cutting speed: re. 320x335 li. 305x335 mm down speed: re. 180 mm dimensions of saw-band: re. 170 x 335 mm workpiece weight: 18 - 115 m/min capacity 90 degrees: round: 0 - 300 mm/min. capacity 90 degrees: flat: 4400 x 34 x 1,1 mm capacity 45 degrees: round: max. 250 kg/m : 4,0 kW work height max.: 2400 kg connected load: 3500 x 2350 x 1900 mm Features: - Material bundle clamping - Automatic feed - Laser light for cut line indication - Micro-dosing device - Motorized chip brush - Clamping pressure control on the control panel - Fully automatic sawing process after entering the length and quantity - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

cutting diameter: 280 mm saw band length: 4200 mm cutting width: 280 x 280 mm dimensions of saw-band: 4200 x 34 x 1,1 mm cutting speed: 18 - 115 m/min multiple feeding: 0 - 6000 mm power capacity: 3,0 kW coolant: voltage: 400 V total power requirement: 5,0 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,35 x 2,40 x 2,00 m - serial-no.: 6082 - control: SIEMENS COROS - OP 15 - chip conveyor - multiple feeding - coolant equipment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

dimensions of saw-band: 3350x27x0,9 mm capacity 90 degrees: round: 260 mm capacity 90 degrees: flat: 300x260 mm capacity 45 degrees: round: 200 mm capacity 45 degrees: flat: 180x180 mm : 130 mm : 120x120 mm : 25 mm min. dia.: 5 mm work height max.: 900 mm : 35/75 m/min weight: 710 kg Standard equipment: - Fast miter adjustment by scale - miter turning point is the point of intersection between saw blade and material system, no changes in the length measure - Manual material tension - at each angular position of the saw frame is the Material stretched parallel in 90 ° - Cutting pressure reduction by weight of the heavy, torsionally stiff Sawing frame and fine adjustment depending on the material cross section via hydraulic damping cylinder - Machine stand with chip collecting tray - saw blade drive with limit stop - Precise saw band carbide roller guide Additional standard equipment 260  ...

cutting diameter: 420 mm saw band length: 0 mm cutting width: 0 mm total power requirement: kW weight of the machine ca.: 1 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Semi automatic bandsaw Depth of throat: 500 Max height of workpiece: 335 mm Sawspeed: 15 - 150 m/min Length of band saw: 4400 x 34 x 1,1 mm Power needed: 3 kW Length : 1250 mm Depth : 2200 mm Height: 1900 mm Weight: 1 ton

Cutting range round: 170 mm Rectangular cutting area: 170 x 170 mm Saw blade dimensions: 3000 x 25 x 0.9 mm Belt speed: 150, 355 & 95 m/min Saw drive: 380 V, 0.75 kW kW Space requirement: 1400 x 600 x 800 mm Weight: 340 kg

Full automatic bandsaw with bundle clamp and autofeed CNC controlled angle positioning workpiece width in bundle clamping: 0-300 mm workpiece height in bundle clamping: 5-300 mm single material feed length: 0-600 mm repeated material feed length: 0-9999 mm maximum cutting capacity (90°, round): 325 mm maximum cutting capacity (90°, rectangle): 500 x 300 mm right mitre cut (45°, round): 300 mm right mitre cut (45°, rectangle): 300 x 300 mm right mitre cut (30°, round): 200 mm right mitre cut (30°, rectangle): 200 x 200 mm left mitre cut (45°, round): 300 mm left mitre cut (45°, rectangle): 300 x 300 mm Depth of throat: 500 mm Max height of workpiece: 325 mm Sawspeed: 18 > 115 m/min Length of band saw: 4400 x 34 x 1.1 mm Length : 2680 mm Depth : 2350 mm Height: 1350 mm Weight: 1800 kg

Offer 25230 Specifications: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 90 ° - at 90° around 335 mm - Square flat 500 x 335 mm - Automatic material replenishment machine 5 - 2300 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2400 x H 1950 x D 2200 mm - Weight approx. 1800 kg

Offer 26014 Technical data: - Automatic workflow cutting process, hydr. Lifting / lowering - of the saw frame, mitre adjustment with hydr. Clamping - Automatic material replenishment machine, mot. Mitre adjustment - Saw blade dimensions 4400 x 34 x 1.1 mm - Cutting speed infinitely adjustable 15 - 150 m/min - Cutting pressure regulation infinitely variable 10 - 15 bar - Lowering speed 0 - 300 m/min - Cutting range 30° - 90° - at 90° around 335 mm - Square flat 500 x 335 mm - at 45° around 330 mm - Square standing 320 x 335 mm - at 30° square standing 170 x 335 mm - Material replenishment machine - Discharge roller conveyor 4000 mm - Feed roller conveyor 4000 mm - Drive 400 V / 6.5 kW - Space requirement approx. W 2300 x H 1750 x D 2200 mm - Weight approx. 1800 kg

Miter range: 90°/30°, saw band inclination: 2°, max. cutting diameter: 260mm, max. cutting dimensions X/Y: 300mm/260mm, saw band dimensions X/Y/Z: 3350mm/27mm/0.9mm, machine dimensions X/Y/Z: approx. 2000mm/1650mm/1850mm, weight: approx. 650kg. An on-site inspection is possible.

Technical data drilling rig: Manufacturer: Peddinghaus Type: BDL 760/3 Machine No.: 4742570604001 Technical data metal band saw: Manufacturer: MEBA Machine Type: 400DG-700 Engine No.: 16835 Year of Make: 2001 Cutting range: 90° Round: 406 mm, Flat: 700x400 mm Mitre left: 45° Round: 400 mm, Flat: 560x400 mm 30° Round: 300 mm, Flat: 300x350 mm Mitre right: 45° Round: 400 mm, Flat: 600x400 mm Clamping range bundle tension: Width: 0-700 mm Height: 20-406 mm Remnant lengths: approx. 75 mm (manual operation) Cutting speed: 18 to 95 m/min - infinitely variable 15 to 150 m/min - AC drive (option) Cutting pressure: infinitely variable hydraulic Lowering speed: 0 to 300 mm/min - infinitely variable Saw blade dimensions: 6760 x 41 x 1.3 mm Saw blade tension: hydraulic Dimensions and weight: Weight of the machine: approx. 3,300 kg (net) Dimensions of the machi ...

dimensions of saw-band: 2910 x 27 x 0,9 mm capacity 90 degrees: round: 240 mm capacity 90 degrees: flat: 310 x 240 mm : 200 mm : 200 x 200 mm : 200 mm : 200 x 200 mm : 140 mm : 200 x 140 mm rest piece length: 60 mm work height max.: 900 mm dimensions: 800 x 1750 x 1500 mm weight of the machine ca.: 470 kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Band Saws 7067x54x1.6 Teeth 3/4

Vertical band saw PEHAKA type SM 4Fabr. No. 27060 Year of construction approx. 1980Projection 380 mmTable size 620 x 480 mmCutting height 250 mmRoller diameter 400 mmWorking height 1120 mmSaw blade length min. 2900 - max. 3100 mmSaw blade speed 22-125 m/min. infinitely variableMotor power 0.6 / 0.75 kWNet connection 380 volts, 50 Hz- infinitely variable saw blade speed via Vario belt drive with lever adjustment and 2 motor speeds- Saw table tiltable +/- 15- Saw blade butt welding machine IDEAL BS 0-16-