MECOF cs used machines

MECOF CS 88 G CUTTER - INSTALLATION YEAR 1990 - SELCA 4045 D steering unit - remote handwheel - x-axis stroke 6300 - Y-axis stroke 950 - Z-axis stroke 1800 - table 8000 x 1000 -n 2° screwed cubes 1500x1000 - spindle motor power 18 Kw - spindle speed 10-1600 with 2 ranges - spindle attachment ISO 50 DIN 2080 - indexed front platform rotation 1 degree - supplied with manual bi-rotary head ISO 50 DIN 2080 connection - fence with gates equipped with microswitch only on 2 sides

This 5-axis MECOF DYNAMILL 3000L was manufactured in 1999. It features an impressive X-axis travel of 5,500 mm, Y-axis travel of 3,000 mm, and Z-axis travel of 1,500 mm. The machine is equipped with a powerful spindle taper of ISO 50 and a tool magazine capacity of 24 tools. If you are looking to get high-quality milling capabilities, consider the MECOF DYNAMILL 3000L gantry milling machine we have for sale. Contact us for further details.

MECOF CUTTER MOD. CR15 NC ECS 2301 4 AXES 1 mt BOARD.

Key data: 4000 mm, 1000 mm, 1700 mm

with CNC control, Fabr. FIDIA, Type: M 2, Travels: X-axis: 4000 mm, Y-axis: 1000 mm, Z-axis: 1700 mm, with autom. Tool changer with 10 tool positions, 2 pcs. clamping bracket, Fabr. MECOF

table 1.200X10.000mm x-axis stroke 8,300mm Y-axis stroke 1,700mm Z-axis stroke 1.020mm Manual birotative head Maximum spindle speed 1,400rpm ECS 1401 CNC Cubes and accessories supplied

X-axis (upright horizontal stroke): 6000 mm Y-axis (vertical head stroke): 3000 mm Z-axis (RAM stroke): 900 mm W-axis (round-ing table): 2000 mm Axis B (table positions): 360000 Table capacity: 17 ton Universal birotative head indexed positioning

x-travel: 5500 mm y-travel: 3000 mm z-travel: 1500 mm table-size: 3000x5000 mm table load: 15 t/m2 taper ISO: ISO50 spindle turning speed range: 10-3000 U/min engine output: 17,5 kW Control: FidiaM20 Spindle power: 22 tool magazin:: 24 Rotating speeds: 600-24000 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- 2 matching pieces availebel - Cast iron not fabricated with welded construction - Made in ITALIA grey cast iron very ridged

x-travel: 4500 mm y-travel: 1700 mm z-travel: 1000 mm TABLE: - table surface (left-right): 6100 mm - table surface (front-back): 1000 mm - workpiece load (max): 8000 kg WORKING SPINDLE / HEAD: - spindle type: Schwenkkopf - tilting range: 1 / 3 ° - spindle revolutions (min): 15 U/min - spindle revolutions (max): 3000 U/min - tool fixture: ISO SK 50 - drive power (max): 30 kW AXIS DRIVES: - feed velocity (min): - mm/min - feed velocity (max): 20000 mm/min Control: NUM 750 total power requirement: - kW weight of the machine ca.: 28 t equipped with: - CNC Control NUM 750 - Universal indexing head 1°x 3° - ATC 61-fold - CE Sign The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Safety control, protective door switch magnetic -Type: PSEN cs1.1p/PSEN cs1.1 1 -Product number: 540000 -8 pin: M12 connector -Protection class: IP 67 -Number: 5x available -Price: per piece -Dimensions: 110/52/H48 mm -Weight: 0.2 kg

Pilz PSEN cs3.1 + PSEN cs3.1n 541053

Pilz PSEN cs3.1 + PSEN cs3.1n 541053

BITZER screw compressors CSH9891-240Y 40 d, R134a, R404a, R407A/C/F, R507, ß, good condition.

BITZER screw compressors CSH9891-240Y 40 d, R134a, R404a, R407A/C/F, R507, ß, good condition.

Heating power: 18.5 kW maximum temperature: 350 ° C maximum capacity: 15 ltr. 380 V / 60 Hz

Impact cross mill Drive: 75 KW 6 x sieves: 4-20 mm; fully assembled on a steel substructure, with Electr. Control.

FOR SALE... TAIKO TWO ROTOR SCREW PUMP TO WHOM IT MAY CONCERN WE VE NEW UNUSED TAIKO CSL-600 TWO ROTOR SCREW PUMP AT OUR STOCK THIS PUMP KEEPED AS SPARE PUMP AT TANKER VESSEL. PLS FIND SPEC AT BELOW. SERIAL NO.: NO. A1K6369 TYPPE: CSL-600 CAP: 560 m3/h REV: 1300MÄ°N POWER: 400PS DATE OF MANUFACTURE: NOV 2006 PUMP IS READY TO TRANSPORT AT WARE HOUSE. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Abu Ugurluba Best of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: 90 232 618 03 85 Mobile: 905556084850aliagamarine.com TURKEY

1 ZELTEX laboratory high temperature dyeing machine type Colorstar CS1-F/2L, SEDO PC1000 dye cycle controller, for 6 inch bobbins

Compressor Bitzer CSH8571-140Y-40P

Cleansorb for chemical binding of the process gas H2S Type: CS200BS Built: 2010

Chiller Bitzer Compressors type: CSH8571-110Y (x2) Volume: 410 m3/h (x2) Compressors cooling capacity for R134a: 456 kW at 0°C/40°C, 370 kW at -5°C/40°C, 295 kW at -10°C/40°C Unit was working on R134a Plate heat exchangers, freon tanks Shell and tube heat exchanger Control cabine Dimensions: 4300 x 1650 x 2100 mm Stock status: 2 Condition: Used Price on request, We have many other refrigeration machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

Food Tools CS4AAC round cake slicer Serial: 3697 2007, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with two cutting inserts, mobile

Food Tools CS4AAC round cake slicer Serial: 5250 2015, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with two cutting inserts and spare blade, mobile

Capacity: 70 Tk/h (single track); year: 2009; panel: Simatic Touch Panel; control: S7-300; Power supply: 400 V, 50 Hz, 11kVa; Possibility of mounting handles in one or two ways. Possibility of attaching handles from a magazine or roll. Support for transparent and laminated film. Operator panel menu: DE/PL/ENG. Possibility of individual adjustment of formats to customer needs.

Spiral kneader, Fabr. Boku, Type MK 240 Ak-CSDT