MIKRON um used machines

PLC control, power module, LT module, E/R module, regenerative module, CNC control, safety slot universal module, plug-in cards, printed circuit boards, control card, circuit board -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 -Safety module: Type SEMU TN 24VDC -Board: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg

This 3-axis MIKRON UME600 was manufactured in 1995. It features a maximum spindle speed of 5,000 rpm and a feed rate of up to 10,000 mm/min. The table size is approximately 900 × 530 mm, providing ample workspace for various machining tasks. If you are looking to get high-quality milling capabilities, consider the MIKRON UME600 vertical machining centre we have for sale. Contact us for further details.

Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining center Mikron UME 600 -for: max. 22 shots -Intake: SK40 -Dimensions: 1200/1150/H860 mm -Transport weight: 294 kg

CNC control, control panel, machining center operator panel, control unit, control panel, control unit -Manufacturer: Mikron, operating unit from CNC milling machine Mikron UME 600 -Type: TCD 22 - DIN 8659 -Printed circuit board: WW TCD 22 control unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/240/H160 mm -Weight: 5.3 kg

Auxiliary circuit breakers, circuit breakers, circuit breakers, load disconnectors, load disconnectors, circuit breakers, circuit breakers, auxiliary switches, main switches -Manufacturer: Mikron, main switch switch disconnector from CNC milling machine Mikron UME 600 -Adapter: Heidenhain Type: 239 758 01 -Dimensions: 430/150/115 mm -Weight: 1.1 kg

PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Mikron, electronic module circuit board from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 -Dimension: 145/110/H55 mm -Weight: 0.4 kg

Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron UME 600 -Motor: Siemens 380V 3.7/5.25 kW see photo nameplate -Speed: 1500/9000 rpm -Spindle head: SK40 mount -Dimensions: 1550/560/H735 mm -Weight: 555 kg

This 3-axis MIKRON UM600 TNC 410/426 was manufactured in 1998. It features a maximum longitudinal movement of 600 mm, transverse movement of 500 mm, and vertical movement of 450 mm. The machine is equipped with a robust table size of 520 x 900 mm and a maximum table load capacity of 400 kg. If you are looking to get high-quality machining capabilities, consider the MIKRON UM600 TNC 410/426 vertical machining centre we have for sale. Contact us for further details.

Milling machine Mikron UM600 BJ 1998 defective

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Manufacturer: Mikron, milling machine table T-slot table from CNC machining center UME 600 -Table surface: 530 x 900 mm -T grooves: groove width 14 mm, groove spacing 63 mm -Transport dimensions: 900/530/H390 mm -Weight: 248 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 I/R module INT. 16/21KW CNC milling machine Mikron UME 600 -Type: 6SN1145-1BA00-0BA0 -Dimensions: 290/100/H480 mm -Weight: 10.6 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 50A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0CA0 -Dimensions: 290/50/H480 mm -Weight: 6.8 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2X15A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AB00-0AA0 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 25A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0BA2 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

Computer monitor, screen, TFT industrial monitor -Monitor: TFT industrial monitor from CNC milling machine Mikron UME 600 -Type: 12.1 TFT industrial monitor 2363130 -Dimensions: 400/320/100 mm -Weight: 3.1 kg

Manufacturer: Mikron Model: UME600 Year of manufacture: 1995 Type of Machine: CNC milling machine Control unit: Heidenhain TNC407 Spindle taper: SK 40 Spindle speed: max. 5,000 rpm Feed rate: max. 10,000 mm/min Table size: approx. 900 × 530 mm Travel paths: X 600 mm / Y 500 mm / Z 450 mm without automatic tool changer Motor power: max. 9 kW Weight: approx: 3,200 kg Condition: - Used, good overall condition - Fully functional and ready for use Equipment / Accessories: - coolant pump - machine vice - 3D probe - Various collet sets / tool holders SK 40 - Toolbox with worktop and hand vice - Further accessories available upon request Find more here - / Contact us at -

Control: HEIDENHAIN TNC 360 Technical data Table length: 900 mm Table width: 530 mm Longitudinal travel (X-axis): 560 mm Transversal travel (y axis): 500 mm Vertical travel (z axis): 400 mm Spindle speeds: stepless horizontal from: 5 rpm up to: 5000 rpm vertical from: 5 rpm up to: 5000 rpm Spindle nose: ISO: SK 40 DIN 69871 Feeds: longitudinal from: 1 mm/min up to: 8000 mm/min transversal from: 1 mm/min up to: 8000 mm/min vertical from: 1 mm/min up to: 8000 mm/min Rapid traverse:: 10 m/min Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 3350 kg Overall dimensions machine: Length: 3930 (2625) mm Width: 2650 mm Height: 2140 mm Various accessories: Electronic hand held control Coolant system

Control: HEIDENHAIN TNC 426 Operating hours: 45357 Technical data Table length: 1200 mm Table width: 600 mm Longitudinal travel (X-axis): 710 mm Transversal travel (y axis): 630 mm Vertical travel (z axis): 500 mm Spindle speeds: up to: 6300 (42´000*) rpm Tool changer: number of tools: 20 Feeds: longitudinal from: 0 mm/min up to: 15000 mm/min transversal from: 0 mm/min up to: 15000 mm/min vertical from: 0 mm/min Milling spindle motor: 11 kW Machine´s weight about: 4690 kg Overall dimensions machine: Length: 4700 mm Width: 2100 mm Height: 2700 mm Various accessories: Rigide table High frequency spindle: 42000* rpm Manufacturer: FISCHER Set of toolholders Oil mist extractor: FIBARON

x-travel: 710 mm y-travel: 630 mm z-travel: 500 mm table surface area: 1100 x 585 mm rotary table dia.: 500 mm spindle taper: SK 40 spindle turning speed range: 5 - 6300 U/min spindle power: 11 kW no. of tools in magazin: 2 x 22 control: HEIDENHAIN, TNC 426 total power requirement: 20 kW weight of the machine ca.: 5,8 t Accessories: various tool holders, probe RENISHAW OMP 60, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel X/Y/Z: 560mm/500mm/400mm, speed: 5000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29647h. The central lubrication system shows issues. Documentation available. An on-site inspection is possible.

x-travel:600 mm y-travel:500 mm z-travel:450 mm weight of the machine ca.:3,5 t

x-travel:600 mm y-travel:500 mm z-travel:450 mm turning speeds:5 - 5000 U/min quill stroke:90 mm total power requirement:9 kW feed range:0-10.000 mm/min weight of the machine ca.:3260 kg dimensions of the machine ca.:2200x2800x2000 mm spindle:6 kW vertical milling head:SK 40 CNC universal milling machine without toolchanger, Equipped with CNC-Heidenhain TNC 407 el.handwheel coolant device

MIKRON VCP 800W Duro CNC vertical machining center was built in 2004 in Switzerland by Mikron Comp-Tec AG. The machine is designed for precise machining of steel, aluminium and the production of moulds and tools. The machining process is performed by means of a reliable spindle and precision cutting tools. The spindle, driven by a powerful motor, rotates at a maximum speed of as much as 20000 rpm, ensuring rapid machining while maintaining high efficiency at the same time. Inside the fully illuminated workspace, there is also a large work table with T-slots for easy workpiece and tooling mounting. All this is complemented by an advanced HEIDENHAIN iTNC 530 CNC control with an intuitive interface and an access to many advanced functions. The MIKRON VCP CNC machining center weighs 9120 kg. The MIKRON VCP 800W Duro is offered with an extensive range of equipment, including, among others, ...

Five older thread milling machines Mikron are available, 2x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible.

BRAND: MIKRON YEAR: 1994 MODEL: VCE750 APPLICATION TYPE: MILLING LOCATION: GERMANY MACHINE TYPE: MACHINING CENTERS (VERTICAL) AVAILABILITY: IMMEDIATELY Technical Information CONTROL UNIT BRAND: MIKRON MAIN DRIVE SPINDLE MOTOR POWER: 7,5 / 10 KW NUMBER OF AXIS: 3 MOVEMENT X-AXIS MOVEMENT: 750 MM Y-AXIS MOVEMENT: 400 MM Z-AXIS MOVEMENT: 500 MM Additional Information MACHINE BENEFITS TECHNICAL MACHINE BENEFITS: - NO THREAD CUTTING POSSIBLE (THE MACHINE DOES NOT HAVE THIS TOOL) - 20-FOLD TOOL CHANGER