4 MITSUBISHI edm machines used machines

Key data: 500 mm, 3 0, 3500 kg

Travel X 500 mm / Y 350 MM / Z 300 mm Water bath machine Automatic wire threading incl. radiator

Max. workpiece dimensions (W x D x H) 1050 x 820 x 305 mm Max. workpiece weight 1500 kg Table dimensions (W x D) 860x640 mm Machine travels (X x Y x Z) 600 x 400 x 310 mm Machine travels (U x V) ±75 x ±75 mm

Key data: 700 mm, 2900 kg

For sale; Mitsubishi die-sinking EDM machine type EA12D. The travel paths along the X, Y and Z axes are 400 x 300 x 300 mm. The maximum workpiece dimensions are 1000 x 650 x 350 mm. Control is Mitsubishi M700 CNC met 64-bit Fuzzy Logic. Maximum unit weight is 1000 kg. maximum electrode weight is 50 kg. The machine is equipped with a 4-station electrode changer with C-axis including 4 pieces of tool holder and transformer.

EDM machine Mitsubishi FA20 The rear door seal needs to be replaced A complete service must be done after relocating the machine, adjusting axes According to the Mitsubishi Service Center, costs approx. 2,500 €

Manufacturer: MITSUBISHI Model No.: QA 20 Year: 2000 Condition: Used Stock number: 9498 Switch-on hours: 2845 h Operating hours: 2738 h Max. travel length of the X-axis: 500 mm Max. travel length of the Y-axis: 350 mm Max. travel length of the Z-axis: 300 mm Maximum workpiece length: 1050 mm Maximum workpiece height: 295 mm Maximum workpiece height: 800 mm Maximum table load: 1500 kg Tank dimensions: 1050 x 800 x 295 mm Machine weight: 3000 kg

A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible.

This Mitsubishi Electric SG12M die-sinking EDM machine was manufactured in 2020. It features a robust 3750 kg weight, with a maximum workpiece weight capacity of 1000 kg. The machine includes a dielectric fluid chiller unit and a dual paper filter system, ensuring optimal operational conditions. The working tank has an automatic elevation system and hinji open-door for ease of use. If you are looking to get high-quality die-sinking capabilities, consider the Mitsubishi Electric SG12M machine we have for sale. Contact us for more information.

This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7, Y-Axis Travel of 11.8, and Z-Axis Travel of 8.7. It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine.

This 5-axis Mitsubishi MV2400S wire EDM machine was manufactured in 2015. It features X, Y, Z movements of 600 x 400 x 310 mm and U, V axes at 150 x 150 mm, supporting a maximum workpiece weight of 1,500 kg. Equipped with an advanced Mitsubishi M700 controller with 3D CAD/CAM capabilities, it ensures precise machining. Consider the opportunity to buy this Mitsubishi MV2400S wire EDM machine. Contact us for more information about this machine.

This 5-axis Mitsubishi FX10K wire EDM machine was manufactured in 2001. It features a 32-bit CNC control, automatic wire threading, and a generator for brass wire cutting. Capable of handling workpieces up to 630 × 530 mm and 500 kg, it includes a water purifier tank and central lubrication. Reach out for more information about this machine.

This 5-axis Mitsubishi FX 20 wire edm machine was manufactured in 1999. It offers precision and efficiency for complex wire EDM tasks. Consider the opportunity to buy this Mitsubishi FX 20 wire edm machine. Contact us for more information.

This 5-axis Mitsubishi MV-4800 wire EDM machine was manufactured in 2018. It features a travel capacity of 800 x 600 x 510 mm and can accommodate workpieces up to 1200 x 1020 x 505 mm with a maximum weight of 3000 kg. The machine is equipped with advanced control features, including a 15 touch screen and 3D CAD/CAM capabilities. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV-4800 machine we have for sale. Contact us for further details.

This 5-axis Mitsubishi MV4800 was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 510 mm, making it suitable for precision cutting of conductive materials. The machine includes a water-based dielectric system and automatic wire threading. If you are looking to get high-quality wire erosion cutting capabilities, consider the Mitsubishi MV4800 wire EDM machine we have for sale. Contact us for further details.

A Mitsubishi CNC wire EDM machine including cooling unit is available. Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, travel X/Y/Z: 500mm/350mm/300mm, max. table feed rate: 1300mm/min, wire diameter range: 0.2mm-0.3mm, max. wire feed rate: 250mm/s, wire tension range: 2N-25N, tank volume: 635l. Machine dimensions X/Y/Z: approx. 1850mm/2350mm/2050mm, weight: approx. 2550kg. Documentation available. An on-site inspection is possible.

Manufacturer: Mitsubishi Model: W30FV2-2 Type: Wire EDM machine (Wire erosion) Date of Manufacture: November 2006 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Manufacturer: Mitsubishi Model: FX20K Type: Wire EDM machine (Wire erosion) Year of Manufacture: 1999 Workpiece and Table Specifications - Maximum workpiece size (W x D x H): 1,050 x 800 x 295 mm - Maximum workpiece weight: 800 kg - Table dimensions: 780 x 630 mm - Axis travel (X / Y / Z): 500 x 350 x 300 mm - Maximum table feed rate: 1,300 mm/min Wire and Cutting Specifications - Wire diameter: 0.2 to 0.3 mm - Maximum wire feed rate: 250 mm/sec - Wire tension: 2 to 25 N Machine Dimensions and Weight - Overall machine dimensions (W x D x H): 1,810 x 2,310 x 2,050 mm - Machine weight: 2,550 kg Filter System - Tank capacity: 635 litres - Filter flow rate: 30 l/min - Filter fineness: 3 micrometres - Filtration: Paper filter (2 units) - Conductivity control: 0.5 to 100 x 10 ohm/cm - Filter unit dimensions (W x D x H): 800 x 1,700 x 1,720 mm - Filter unit weight (empty): 230 kg Ge ...

Manufacturer: Mitsubishi Model: W30FAS-2 Type: Wire EDM machine (Wire erosion) Year of Manufacture: 2006 Find more here - .ucymachines/ Contact us at - sales@ucymachines

This 4-axis Mitsubishi SG8S was manufactured in 2023. It features a travel range of 300 mm in the X-axis, 250 mm in the Y-axis, and 250 mm in the Z-axis. The machine includes a worktable size of 500 x 350 mm and can accommodate a maximum workpiece weight of 550 kg. If you are looking to get high-quality die-sinking capabilities, consider the Mitsubishi SG8S machine we have for sale. Contact us for further details.

This Mitsubishi MV1200S wire EDM machine was manufactured in 2017. It features an X-axis travel of 400 mm, Y-axis travel of 300 mm, and Z-axis travel of 220 mm. The machine is equipped with automatic wire threading and the Mitsubishi D-CUBES control system, ensuring efficient and stable production. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200S machine we have for sale. Contact us for further details.

This 5-axis Mitsubishi FA20 wire EDM machine was manufactured in 2004. It features an X-axis travel of 500 mm, Y-axis travel of 350 mm, and Z-axis travel of 300 mm. The machine can handle workpieces up to 1050 mm x 800 mm x 295 mm and has a maximum workpiece weight of 1500 kg. If you are looking to get high-quality EDM capabilities, consider the Mitsubishi FA20 wire EDM machine we have for sale. Contact us for further details.

This 5-axis Mitsubishi MP1200 wire EDM machine was manufactured in 2021. It features a robust design with a machine weight of 2700 kg and is equipped with the advanced D-CUBES controller. If you are looking to get high-quality wire electrical discharge machining capabilities, consider the Mitsubishi MP1200 machine we have for sale. Contact us for further details.

wire EDM machine, year 2000. Used machine. More info & price on IndustrialBuyer.

wire EDM machine, year 2015, 17190 operating hours, CNC Mitsubishi Electric, schermo a colori con tastiera e telecomando portatile. Used machine. More info & price on IndustrialBuyer.

wire EDM machine, year 2008. Used machine. More info & price on IndustrialBuyer.

MITSUBISHI ML3015eX PLUS laser cutting machine was built in 2019 in Japan by MITSUBISHI ELECTRIC CORPORATION. The machine, distinguished by the use of the most advanced technology available on the market, is an excellent choice for precision cutting of sheet metal made of, among others, steel, aluminium and copper. Workpieces with a maximum length of 3050 mm and a width of 1565 mm are machined by means of a reliable head with auto focus, which is powered by a 4.5 kW laser beam. The laser beam is generated by electrical discharges in a special gas mixture with a relatively slow flow and in a direction perpendicular to its axis. Real-time power monitoring, combined with a constant beam length, ensures the highest cutting quality over the entire work area and prevents power deviations of more than ± 1%, which are necessary for machining highly reflective materials. The entire machining  ...