7 MÜGA used machine for sale

Key data: 380 mm, 250 mm, 350 mm

MÜGA H250-5 built in 2018 the system ran in about 2.5 shifts, the machine has a swivel rotary table, an FMB bar feeder, a cooling lubrication filtration (IKZ) like a chip conveyor, the machine has a Fanuc control and at the moment the spindle is defective - you can also make a price proposal for the machine without spindle, it will take about 5 days until we can order and install a new spindle, from this point on the Müga will only be sold with a new spindle. so with o spindle hours

CNC Vertical Machining Center "MÜGA S 3030" With MITSUBISHI track control Year of Make: 2013 Travel: X 300 Y 250 Z 250 Speed range: 60 – 15,000 rpm infinitely variable With the following accessories: Rigid angle table 400 mm x 250 mm clamping surface Vertical tool changer with 12 magazine positions ( SK 30 ) Various tool holders ( SK 30 ) 2-fold pallet changer 4 Allmatic vices jaw width 100 mm Electronic handwheel Full protection cabin with sliding doors and interior lighting IKZ system with paper belt filter Coolant Setup Signal light 2 colours Chip conveyor 6 pcs. machine shoes Operating Instructions

MÜGA high-speed drilling-milling centre TYPE: S 3030 with 2-fold pallet changer incl. chip conveyor (similar to FANUC or BROTHER) Control: MITSUBISHI M70 Travel: X/Y/Z: 300 x 250 x 250 mm Spindle speed: 60 – 10,000 rpm. Motor power: 100//30% ED 2.2/3.7 kW Star turret: 12-speed Tool change time: 1.6 sec. Chip-to-chip time: 2.5 sec. Tool holder: BT 30 - 45° 2-fold pallet table: LxW: 400 x 250 mm Chip conveyor ejecting backwards Rapid traverse: X/Y/Z: 48/48/60 m/min. Installation area: L x W x H: 2690 x 1570 x 2370 mm Weight: 3300 kg Total connected load: 11.5 kW Description: The machine is suitable due to the 2-fold pallet system, as well as the high rapid traverses and fast chip-to-chip time for series part production. From 2011 to 2020, it was used in single-shift operation exclusively for ALU machining. There is no hour meter. The machine is still un ...

x-travel: 1100 mm y-travel: 600 mm z-travel: 510 mm Table dimensions: 1300 x 600 mm table load: 1,0 t tool taper: ISO 40 DIN 69871A spindle turning speed range: 60 - 12000 U/min rapid traverse: 32 m/min power capacity: 10 / 17 kW no. of tools in the magazine: 32 Stück tool length - max.: 300 mm Tool diameter: 76 / 127 mm weight of tools max.: 8 kg tool changing time: 2,5 sec total power requirement: 30 kW weight of the machine ca.: 8,5 t dimensions of the machine ca.: 4400 x 2250 x 2920 mm Infrared measuring device: Machine with only 3.311 spindle running hours ! Heidenhain iTNC 530 CNC control 32-station ATC Internal coolant system: 20 bar Coolant tank: 480 l Chip conveyor Heidenhain glass scales in X/Y/Z Oil-cooler Infrared measuring device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is equipped with technical documentation, with accessories such as various clamping jaws, holders, square turning chisels, indexable inserts, etc., as well as with a bar feeder. Length of bar feeder approx.: 2200 mm. Additional technical specifications: • Swing circle diameter: max. 700 mm • Rapid traverse: 17.5 m/min • Collet chuck: ISO DIN 173E • Tool holder square: 20 x 20 mm • Tool holder round: 20/25 mm • C-axis resolution: 0.1° • tool places: 14 pieces external • Main spindle: 5, internal: 3 + 4 • Driven tool stations: 2 • Simultaneous machining: inside and outside • spindle power: 7,5 kW

With technical documentation and accessories, such as three-jaw chuck, clamping jaws and collets. Additional technical specifications: • Max. swing circle: 360 mm • Collet chuck: ISO DIN 163 E • Tool holder square: 16 x 16 mm • Tool holder Round: 20 mm • Spindle power: 5,5 kW • Tool places in total: 7 pieces - External: 4 / Internal: 3

turning diameter: 100 mm turning length: 100 mm Main Spindle:: spindle motor: 7,5 / 11 kW spindle passage: 42 mm collet diameter: DIN 173E (A5) spindle turning speed range: 6000 U/min rapid traverse: 30 m/min travel x / y / z: 300 / 770 / 250 mm 2nd Spindle:: spindle motor: 2,2 / 3,75 kW spindle passage: 30 mm dia. of draw-in collets: DIN 173E (A5) mm spindle turning speed range: 6000 U/min rapid traverse: 30 m/min travel x / y / z: 900 / 770 / 300 mm control: Mitsubishi M830 tool taper: ER 20 total power requirement: kW weight of the machine ca.: 5,6 t dimensions of the machine ca.: 3,8 x 2,2 x 2 m Simultaneous machining on the main and counter spindles - Mitsubishi M830 CNC control with electronic handwheel - Main and counter spindles -- each with C- and Y-axes -- 173 E collet chuck (A5) - Swivel head (B-axis 0–360° in 0.001° increments) on the main and counter spindles - 36 tool ...