26 NETSTAL used machine for sale

Presse à injecter électrique NETSTAL 50 T type ELION 500 - 60 Année 2005 - 6000 heures Force de serrage : 50 T - 500 KN Diamètre vis : 18 mm Rapport L/D : 21,7 Pression d’injection : 2350 bars Volume injectable : 25,4 cm3 Poids injectable en PS : 24,4 gr Vitesse d’injection : de 250 à 450 mm/s Distance entre colonnes : 360 x 360 mm Dimensions des plateaux : 920 x 920 mm Epaisseur mini/maxi du moule : 150-450 mm Course d’ouverture : 310 mm Dimensions : 4,36 x 1,66 x 2,05 m Poids : 6200 kg

Operating hours: 75’851 h Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 260-600 mm Nominal voltage (V / Hz): 400/50 Nominal current (A): 100 Rated power (kW): 55 Screw diameter (Ø): 55

Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Condition: Defective – for spare parts (Circuit board removed, hydraulic valve removed)

Operating hours: 132‘186 h Absolute cycle counter: C120 = 062077965 Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 3000 Opening stroke (mm): 0-700 Mold installation height: 400-750 mm Nominal voltage (V / Hz): 400 / 50 Nominal current (A): 99,5 Rated power (kW): 55 Screw diameter (Ø): 55 Air valves: 4 Controllable -With dosing system -Handling robot Wittman, available as an option upon customer request

Operating hours: 97’919 h Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Nominal voltage (V / Hz): 400/50 Nominal current (A): 136 Rated power (kW): 75 Screw diameter (Ø): 55 Air valves: 4 Controllable

Key data: 175 kN, 301 g/PS, 50 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: NETSTAL Type: SYNERGY S-1750-460 Year of Make: 2004 Clamping force: 175 tons Handlebar spacing 570 x 570 mm Installation height min./max.: 400 - 700 mm Opening travel: 450 mm Screws DN: 50 mm Max. displacement: 314 cm³ Moulded part weight in hp: 301 g 2 x Core Pull Interface Robot The machine is sold without the SEPRO robot pictured. The SEPRO robot in the pictures is not included.

Netstal Elion 800 injection moulding machine with Wittmann Handling Primus The machine is fully functional and has only 6500 operating hours

Injection moulding machine Netstal synergy 600/110 BJ 2001

Netstal injection moulding machine Type: Synergy S3000-1700 / 900 2 component control:-year of production: 2000 Clamping unit Clamping force t: 300 gap mm: 0-700 Holm dimension mm: 720 x 720 min/max height mm: 400-750 Plate size: 1127 x 1060 injection unit Screw diameter mm: 70/50 injection weight gr: 916 / 377 Injection volume cm 3: 954/393 spray pressure bar: 1801/1840 Dimensions and weights Dimensions Lxwxh m: 8.8 x 2.3 x 2.3 machine weight kg: 23,300/1,500 Miscellaneous Neureder robot rotary table with servo motor magnetic disk on the nozzle side cascade control 2 core cable robot interface Gasinjection system

Netstal injection moulding machine Type: Synergy 420 E-3700 control:-year of production: 2000 Clamping unit Clamping force t 420 gap mm: 0-700 Holm dimension mm: 713 x 713 min/max height mm: 600 / 950 Plate size: 1127 x 1060 injection unit Screw diameter mm: Gr 90 injection weight: 1955 Injection volume cm 3: 2035 spray pressure bar: 1821 Dimensions and weights Dimensions Lxwxh m: 10 x 2.3 x 2.3 machine weight kg: 27900 Miscellaneous Euromap12 3 x core features

Netstal injection moulding machine Type: Synergy 420 E-3700 control:-year of production: 2000 Clamping unit Clamping force t 420 gap mm: 0-700 Holm dimension mm: 713 x 713 min/max height mm: 600 / 950 Plate size: 1127 x 1060 injection unit Screw diameter mm: Gr 90 injection weight: 1955 Injection volume cm 3: 2035 spray pressure bar: 1821 Dimensions and weights Dimensions Lxwxh m: 10 x 2.3 x 2.3 machine weight kg: 27900 Miscellaneous Euromap12 3 x core features

Netstal injection moulding machine Type: HP 3000 / 1650 control:-year of production: 1995 Clamping unit Clamping force t 300 gap mm: 625 Holm dimension mm: 680 x 680 min/max height mm: 500-850 Plate size: 1040 x 1040 injection unit Screw diameter mm: Gr 70 injection weight: 868 Injection volume cm 3: 954 spray pressure bar: 1727 Dimensions and weights Dimensions Lxwxh m: 9 x 2.30 x 2.52 machine weight kg: 21.500 Miscellaneous EUROMAP 12

Netstal injection moulding machine Type: HP 3000 / 1650 control:-year of production: 1995 Clamping unit Clamping force t 300 gap mm: 625 Holm dimension mm: 680 x 680 min/max height mm: 500-850 Plate size: 1040 x 1040 injection unit Screw diameter mm: Gr 70 injection weight: 868 Injection volume cm 3: 954 spray pressure bar: 1727 Dimensions and weights Dimensions Lxwxh m: 9 x 2.30 x 2.52 machine weight kg: 21.500 Miscellaneous EUROMAP 12

Net valley Synergy 600 / 5500E Injection moulding machine Control: DSP Year: In 2004 Clamping unit Clamping force t:600 Opening stroke mms: 0-1000 Distance between tie bars mm:1220x1220 installation height min / max. mm: 500/1000 Mould fixing platen size h x v:1620 / 1620 Injection unit Screw size mm:100 Injection shot weight in Polysterol gr:2711 Injection volume cm?:2827 Injection pressure increased bar:1950 Size and weight totally weight Kg:36500 / 17500 Runhour 60,000 h Additional information Euromap 12

Netstal Type: Synergy 900/230 Built: 1996 Closing unit Clamping force t: 90 Opening path mm: 0-350 Holm size mm: 410 x 410 Installation height min/max mm: 450/750 Spraying unit Screw diameter mm: 35 Spray weight gr: 118 Spray volume cm3: 123 Spray pressure bar: 1830 Dimensions and weights Dimensions LxWxH m: 5.4 x 1.8 x 2.2 Machine Weight Kg: 6000 Other Euromap 12 Interface

Netstal Type: Synergy 900/230 Built: 1997 Closing unit Clamping force t: 90 Opening path mm: 0-350 Holm size mm: 410 x 410 Installation height min/max mm: 450/750 Spraying unit Screw diameter mm: 35 Spray weight gr: 118 Spray volume cm3: 123 Spray pressure bar: 1830 Dimensions and weights Dimensions LxWxH m: 5.4 x 1.8 x 2.2 Machine Weight Kg: 6000 Other Euromap 12 Interface

This Netstal S 6000-5500E was manufactured in 2004. A hydraulic injection moulding machine featuring a tie bar distance of 1020 x 1020 mm and an opening stroke of 950 mm. Equipped with 1 core valve, 2 air valves, and a screw diameter of 100 mm. It also includes an EU 12 for robot connection. For more information about this hydraulic injection moulding machine, please reach out to us.

This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information.

This injection moulding machine was manufactured in 2001. A robust Netstal SYNERGY 1500-600, it features a clamping force of 150 T and a screw diameter of 45 mm. It has been used for PP materials, ensuring reliability and efficiency with 56,000 production hours. A great opportunity to buy this Netstal SYNERGY 1500-600 injection moulding machine. Contact us for more information.

This Netstal EVOS 5500-2900 Speed was manufactured in 2013. Ideal for high-speed plastic processing, it ensures efficient operations with minimal downtime. A robust choice for your production needs. Contact us for more information.

This Netstal EVOS 5500-2900 Speed was manufactured in 2014. Ideal for high-speed plastic processing, it ensures efficient operations with its robust design. If you are looking to get high quality injection molding capabilities consider the Netstal EVOS 5500-2900 machine we have for sale. Contact us for more information.

Netstal S-1500-460 (2003) Clamping force - 150 t Screw diameter - 45 mm Hours - 79.000

Description Working hours: 26782 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Description Working hours: 27139 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Description Working hours: 36359 Machine complete with second and third injection, thermoregulators and protections. n. 16 hot rooms n. 8 radial air

Description Working hours: 32848 Machine set up for a third injection. Machine complete with thermoregulators and protections. n. 16 hot rooms n. 8 radial air