6 OTT wide belt grinding machines used machines

Key data: 110 mm, 1 , 160 mm

Specifications: max. working width: 1100 mm, min./max. workpiece thickness: 3 / 160 mm Sanding belt dimensions: 2150 x 1120 mm, sanding belt speed: 18 m/sec. Feed speeds: 4 + 8 m/min. Motor power grinding agregate: 11 kW, power adjustment: 0.55 kW, feed carpet: 1.3/1.8 kW Operating pressure: 6 bar, Air requirement: 10 l/min., Suction nozzle: 1 x 150 + 1 x 120 mm WxDxH: 1800 x 2000 x 2100 mm, weight approx. 2400 kg Standard equipment: - Contact roller D=150 mm, hardness 90° Shore - Air sanding shoe with automatic insertion and removal - Rigid sanding shoe for solid wood frame sanding - Brush roller driven by the grinding unit - Automatic centering of the feed carpet - Extension carpet with high quality rubber circular hole carpet and auto. Carpet centering - Pneumatic sanding belt tension with length compensation - Non-contact abrasive belt oscillation, electronic - Low ...

Wide belt grinding machine OTT RS-O Grinding width: 1300mm Calibration roller + fine sanding + cleaning brush

PART NUMBER: 7549 Specifications: - max width of the workpiece 1100mm - max height of the workpiece 170mm 2 units: 1) grooved rubber roller for calibrating 2) rubber roller + boot boot + metal roller –in advance: - metal roller, slip - aggregate - metal roller, slip - A unit with a shoe - metal slip outfeed roller – from below: - Pulling strap - pneumatic oscillation of the belts - electric lifting of the table top - 2 types of feed speeds - 11kW motor - with pneumatic brake - working pressure 6-8bar - extraction spigot diameter 2x150mm - total dimensions length/width/height 1960x1700x2000mm - weight about 2000kg ADVANTAGES – made in Germany – 2 units – unpainted – used grinder, very good condition Net price: 34900 PLN Net price: 8116 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

OTT Comet-2 1100 • Wide belt sanding machine • Grinding width 1100 • Machine is unchecked • Service recommended • No Guarantee / No Warranty • From stock Lieboch NET € 1.500,00

I am selling a wide belt sander OTT MEGA TR11, built in 1996. Configuration: Hard-rubber calibration cylinder Combination unit rubber cylinder + pneumatic shoe with segment control. Working width 1100mm. Electronic height adjustment with digital display. 3-160mm 1 motor 11kW 2 feed rates. Sensitive adjustment of the shoe position. Pneumatic adjustment of the shoe and cylinder pressure. Condition LIKE NEW ! The machine worked very little. Available the same.

OTT MEGAtronic 111 Wide-belt calibration fine grinding machine 1. Grinding Unit Calibration Roll Unit 2. Grinding unit electronically controlled link sanding shoe unit Working width 1100 mm Feed speed 5 + 10 m/min Motor power grinding unit approx. 11 kW Machine is WORKSHOP TESTED  from stock Lieboch

Wide belt grinding machine  with 3 rollers and 3 belts Grinding width 1300 mm Year of manufacture 2001 Power 33 kw 2 main engines  Amper 69

Mould grinding machine OTT - KG Up to 150 mm wide with Stepless Transport Carpet Profile strip and semi-round mouldings

Widebelt Sander line with 3 machines Working width: 1300 Composed of: Boere Elite - 1 x calibration unit with contact roller - sandinmg unit from below Ernst LKB - Cross Sanding Unit - Longitudinal Sanding Unit OTT RSO - Calibration Roller - Sanding pad

Machine is still in < operation and fully functional solid up to 20mm rolls PVC to 3 mm caps flush milling RADIUS milling milling Schwabbleln chamfer

Edge Bander Manafacture: OTT Model No.: K155 Year of construction: 1992 Equipment: Roll magazine Glue unit with hot-melt adhesive - glue basin Pressure zone Cross-cut units Flush milling units Fine milling units with chamfer or radius milling Scraper Wobble

Edge thickness 0.4 - 3 mm Workpiece thickness: max 50 mm Min workpiece length 150 mm Feedspeed 22 m/min

B&A REF: 9242 TON: 270 SCREW DIAMETER: 65MM SHOT WEIGHT: 840 STROKE VOLUME: 8063CM3 INJECTION PRESSURE: 1550AR PLATEN SIZES: 860 X 860MM DBTB: 570 X 570MM MIN MOULD HEIGHT: 210MM MAX MOULD HEIGHT: 730MM MOULD OPENING STROKE: 630MM MAX DAYLIGHT: 1360MM EJECTOR STROKE: 220MM CONTROLS: SEF100 CORE PULLING: 1 AIR VALVES: 1 MOTOR: 37 HEATING CAPACITY: 20KW ROBOT INTERFACE: EUROMAP SCREW DRIVE: HYDRAULIC

OTT Tornado R + PU PLC Comp. Control 7" TFT-Touch color display CM-CombiMelt for EVA and PUR hot melt adhesives Pre-milling unit - joining Full car. Role magazine Full car. Edge magazine Flush caps pneum. 0-3° Flush Milling - 12mm Radius milling R-2, R-5 Bevel milling 0°/15°/30°/45° Corner rounds Radius scraper blade Wing Scraper Soundproof booth with room extraction Cleaning set with 4-fold spraying device, fine buffing device and lubricant spraying device First delivery 2006 Machine is WORKSHOP TESTED in TOP CONDITION from stock Lieboch

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Type HF 08.2 -Power: 0.6 kW / 200 Hz -Speed: 1200 rpm -Adjustment ranges: see photos -Number: 2x milling unit available -Price: per piece -Dimensions: 530/490/H600 mm -Weight: 67 kg/piece

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor, saw unit, milling unit saw unit -Manufacturer: Paul OTT, saw unit from edge banding machine U 206 -Engines: Type K 14 -Power: 0.8 kW / 200 Hz -Speed: 1200 rpm -Saw blade: Ø 140 mm -Saw blade spacing: 515 to 1070 mm -Dimensions: 530/490/H600 mm -Weight: 78 kg

Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 -Power: 2.2 kW -Speed: 12155 rpm -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm -Weight: 89 kg

Assembly angle on both sides with threaded plates brand: Otto Kraft height 835mm ; Width 550 mm ; Length 450 mm plate size 750 mm x 500 mm All details without gewaehr

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: OKA Type: TBA Depositor working width: 450 mm different: wire cutter moveable on rolls workingtable folding I offer this machine in as-is where it is condition ex warehouse Hessisch Lichtenau, unpacked

VA-12. Compressed Air Systems (Air Reservoir) 2 complete systems, functional, Built: 1991 Manufacturer: Otto Boge GmbH & CO.KG Each unit contains: - 1 BOGE compressor tank - Diameter: 1.20m - Length: 2.20m - Mass: 1.5 t - Volume: 2000 l - Pressure: 16 bar Each unit includes: - 1 compressor, Type K-TROCHL-KOMPR - Manufacturer: Kompressor HD Technik GmbH Mülheim/Ruhr - 1 motor Technical Data: - Intake capacity: 5-50 m³/h - Intake pressure: 1.03-1.35 bar - Temperature range: 5-30 °C - Motor type: SCHORCH K 3200 L - Model: B 1014-2, 24 kW, 400V Find more here - / Contact us at -

Radial Drilling Machine OTTO MULLER Spindle: CM4 Spindle speed: from 70 to 1400 RPM Front table size: 1350 x 550 Back table size: 1000 x 400 mm Slide travel: 1000 mm Maxi distance spindle nose/front table: 600 mm Motor: 2 speeds Maxi column rise: 400 mm Auto descent Drilling/tapping function Spindle speed adjustment by belt variation Hydraulic locking Lubricant pump Voltage: 380 V Dimensions in low position: W 1500 x D 2400 x H 2300 mm Weight: approx 2 T

approx. 23 pieces OTTO dangerous goods container, 600L, large container "IBC" – used -: Price per piece from location: 395.- € (net)! Manufacturer: Otto Containersysteme GmbH Type: 11A/X/01/99/D/OTTO/BAM 0356/2556/1090 Manufacturer Part Number: 33782 Year of Make: 1999 Capacity: 600L Tank material: St. W 24 Maximum permissible gross weight: 1.090kg Net weight: 190kg with approval as a large container "IBC" for the national (GGVS/GGVE/GGVS and international (ADR/RID/IMDG code) transport of dangerous goods of packaging groups I, II + III (X-coding) * Dimensions according to DIN 30741 * Tank made of steel, hot-dip galvanized * with hinged, lockable lid * Lid locks in place by special spring technology up to approx. 70° at any opening angle * Container all around with only 2 closures on the front *with forklift pockets, safety hook for PE bags, nameplate and bag Co ...

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Otto Hänsel GmbH Type: HWR Contents: 330 l Net capacity 200kg Output: from 300 kg/h up to 800kg/h, in depend of product Enginepower: 3,8/3,1 kW Agitator speed: 90 / 45 n/min. steampressure: 10 atü steamconsumption: bis 120 kg/h Steam: Sattdampf, bis 10 bar dimensions: ca. 1500 x 1325 x 1950 mm weight: ca. 1280 kg different: Copper inner shell refurbished from the last owner, this mean checked, cleaned, defect parts changed, paints I offer this machine in “checked/cleaned/painted” condition

Many thanks for your interest in our machinery, please find below our offer: manufacturer: Otto Hänsel GmbH Type: HVK 305 Volume: up to 250kg engine: 1,5 / 1,2 HP Speed: 46 / 23 n/min. steam pressure: 10 atü steam consumption:max. 135 kg/h dimensions: 1650 x 1650 x 2000 mm (lxwxh) We offer this machine in “checked, cleaned, painted” with new bears and seals' condition, without warranty

Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm