7 PALLMANN mills used machines

Drives: 45 KW + 15 KW Weight: 2100 kg Dimensions: L 3.50 m x W 1.36 m x H 1.52 m;

we sell a Pallmann granulator IPS 50x1000. Year of construction :2001. The machine is fully operational. The regrind discharge is equipped with an extraction chute. Optionally, we can also offer you other system components, e.g. Cyclone, etc. Control cabinet with input load switching is included.

Drive : 75 KW Dimensions : L 3800 mm x W 1600 mm x H 2200 mm Weight : 3900 kg.

Drive : 110 KW Dimensions : L 2500 mm x W 1300 mm x H 1800 mm Weight : 2800 kg

Used mill / granulator made by Pallmann, type PS4 - 7.5. New 1972. Speed: Rotor 640

Granulator with rotor width 1000 mm, motor 37 kW, with hopper attachment and hydraulic feed slide. Knives resharpened and whole machine repainted. Very good condition. Optionally with total separator and fan for the regrind.

Manufacturer : Pallmann Grinding disc diameter : 1200 mm

Material: steel Engine: 37 kW Weight: 900 kg Length x Width x Height: 1300 mm x 1000 mm x 900 mm Applicable for production of finest plastic-powder: - finest powder without use of nitrogen - best powder characteristic: best flow behaviour, high apparent density and narrow particle distribution - low grinding temperature, in terms of optimal ducting of the air - fully automatic continous operation - simple regluation of particle size. Throughput rate : 50 - 200 kg / h. Very good condition. ********** Are you looking for something else? Write us below! WE PROJECT AND BUILD YOUR ENTIRE PLANT EXACTLY FOR YOUR NEEDS FROM USED AND NEW MACHINES.

Working width_ 600 mm Working height_ 300 mm N of knives_ 3 OTHERS AVAILABLE FROM STOCK

Drive: 55 KW / 1480 RPM / 500 V Speed rotor: 645

Stock# U2293-1 Used stainless steel contact parts horizontal hammer mill by Pallmann (Germany) type PHM 600-350. Mill has internal dimensions of milling chamber L 600 mm x W 350 mm. Top of milling chamber is manually rised. At the bottom mill has a discharge outlet through the screen. At the top of milling chamber there is installed static knife for grinding of product. Rotor has diameter 500 mm x width 345 mm. On the rotor there are 24 rows with hammers, each row consist of 4 hammers. Total number of hammers is 96. Rotor and hammers are designed in non-corrosive steel. Rotor is belt driven by el. motor 75 kW, 2975 rpm, 380/660 V, 50 hz. Mill has side feeding inlet with dimensions 350 mm x 265 mm. Product is moved into milling chamber through three screws. Screws are driven by el. motor 0.55 kW, 2800 rpm, 220/380V, 50 hz and varispeed gearbox with manual adjustment of outgoing rotatio ...

Stock number: U2293-2 Used carbon steel grinding/refining mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of gap between milling plates. Mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. Front door bolted with central feeding inlet through feeding chute. Bottom discharge.

ID2850 Pallmann year/Bauahr 2001 70 t Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers Impact hammer mill, electric motor 500 KW 400V, output: up to 100 tons/hour, infeed width 2000 mm, rotor diameter 1600 mm, 6 upper feed rollers

Refurbished plast agglomerator for sale. Trial run possible for a fee of 1500€. The fee will be charged at the time of purchase.

* General * SKU312X491 * MakePallmann * TypePPS 4-120 * No.139820170004 * Year of construction2018 * Main Features * Motor33 KW * Inlet diameter120 mm * Specified Features - Fine Impact Mill * Turbo cone millcheck * 2 Driven rotorscheck * Rotor sizeInner roter ø 396 mm: outer roter 400 mm * With grinding trackConidur 1,5: 2: 3 * Housing dimensions ø 800 mm * Inletø 120 mm * Motor22 kW 400 V, 1470 rpm: 11 kW 400 V, 1475 rpm * SpeedInner rotor 3000 rpm, outer rotor 1500 rpm * Fine Impact Mills * MaterialStainless steel 1.4552 * General * Mounted on framecheck * LocationBarneveld * Floor space0,9 x 2,8 m * Total height1,5 m * Weight1600 kg * CEcheckConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsDetergent & surf.CosmeticsE-waste & metalFood additivesSugarAnimal feedFine Impact MillsConfectio ...

ID3765 Pallmann PHPH 16-18 (Grizzly) year/Bauahr 1992 Impact hammer mill, 400 kW electric motor, rotor diameter 1600 mm, rotor length 1800 mm, number of hammers: 52 Impact hammer mill, electric motor 400 KW, rotor diameter 1600 mm, rotor length 1800 mm, number of hammers: 52 pieces

* General * SKU160P705 * MakePallmann * TypePP 4 * No.0668145 * Year of construction1968 * LocationBarneveld * Main Features * Motor22.5 KW * Inlet diameter155 mm * Width100 mm * Specified Features - Fine Impact Mill * Turbo cone millcheck * 2 Driven rotorsimpeller &: co-rotating baffle plate * Rotor sizeInner roter ø 396 mm: Outer roter 400 mm * Grinding room sizeø 600 * Inlet155 x 100 mm * Motor15 kW + 7,5 kW, 380 V * SpeedMax. 4100 rpm: Grinding disc 1450 rpm * Fine Impact Mills * MaterialMild steel * General * With switchgear(as is) * Floorspace2,1 x 1,1 m * Total height0,8 mConsumer wastePaints & coatingsPowdered foodsGeneric medicinesStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsDiscountDetergent & surf.CosmeticsE-waste & metalFood additivesSugarAnimal feedFine Impact MillsConfectionerySolid pharmaceuticsDyes & pigmentsBiopharmaceuticalPlasti ...

* General * SKU440X1396 * LocationBarneveld * MakePallmann * TypePP-6 * Material * Rotor materialAlloy special steel 1.7386 (X11CrMo9-1) * Main Features * MaterialMild steel * Motor30 KW * Specified Features - Miscellaneous Mill * Turbo cone millcheck * 2 Driven rotorscheck * Rotor sizeø 600 x 120 mm: ø 700 x 300 mm * Grinding room sizeø 760 x 200 mm * House jacketed2x * Inlet190 x190 mm * Feeding with vibro feeder(Not available but possible) * Motor11 kW, 380 V, ± 1480 rpm: and 30kW, 380 V, 1465 rpm * Speed11 kW: ± 1480 rpm. and 30 kW: ± 2051 rpm * With jacketcheck * Miscellaneous Mills * MaterialSilicon steel 1.5023 * General * No.0768759 * Year of construction1968 * Floor space1,2 x 1,4 m * Total height1,4 m * Weight900 kg * Extra Specificationssold :as is: , this means no mechanical test of mill and motors.Priced attractively due to the age of the unitPaints & coatingsPowdered  ...

* General * SKU440X1456 * MakePallmann * TypePP-6 * No.0772828 * Year of construction1972 * Material * Rotor materialAlloy special steel 1.7386 (X11CrMo9-1) * Main Features * MaterialMild steel * Capacity30 KW * Specified Features - Miscellaneous Mill * Turbo cone millcheck * 2 Driven rotorscheck * Rotor sizeø 600 x 120 mm: ø 700 x 300 mm * Grinding room sizeø 760 x 200 mm * House jacketed2x * Inlet190 x190 mm * Feeding with vibro feeder(Not available but possible) * Motor11 kW, 380 V, 1480 rpm and 30 kW, 380 V, 1480 rpm * Speed11 kW: ± 1090 rpm and 30 kW: 1480 rpm * With jacketcheck * Miscellaneous Mills * MaterialSilicon steel 1.5023 * General * LocationBarneveld * Floor space1,2 x 1,4 m * Total height1,4 m * Weight750 * Extra Specificationssold :as is: , this means no mechanical test of mill and motors.Priced attractively due to the age of the unit&:nbsp:Paints & coatingsPowdered  ...

Shell end mills, shell mill cutters, milling cutters, disc milling cutters, slot milling cutters -Disc milling cutter: 105 x 19 mm, cross-cut -Socket: Ø 27 mm -Weight: 0.8 kg

Hammer mill Manufacturer Faller used, outdated Engine AEG Type AN 200 LS 2 230 V 91 A 30 KW Speed 2935 rpm can also be used as a wet mill with attachable screw forced insertion for heavy-flowing products Dimensions Width 1400 mm Height 1000 mm Depth 1000 mm (incl. engine) Drum box width 250 mm Drum diameter 550 mm Funnel 350mm x 400 mm Screen plate 20x4 mm (stretch metal) Changes and errors in the technical data, data and prices and intermediate sale reserved.

Working width: 2000 mm rotor flight circle: Ø 1000 mm drive: up to 315 kW cutting system: 40 piece cutting bars facilities: counter knife traverse pivoting hydraulically Right-left operation Hydraulic hood opening Screen: hydraulically extendible

Working width: 820 mm rotor flight circle: Ø 720 mm drive: 90 kW cutting system: 8 cutting blades equipment: mechanical adjustment of the cutting gap Machine weight: 3500 kg

1 x NEW 'Bainite' (India) Make 1000mm (42in) wide x 400mm (16in) dia two roll mill, Hydraulic nip adjustment (dual acting cylinders), Peripherally drilled chilled cast iron rolls (Hardness 65/72 Shore), with anti friction roller bearings, Friction ratio 1:1.08, Hinged guide plates, Lubrication system comprising pneumatic intensifier with grease reservoir, Electro pneumatic brake with power fail safe mechanism. Safety bars fitted to front and rear. Compact right angle drive with 45kW Siemens AC variable speed squirrel cage motor through heavy duty helical design direct drive reduction gearbox (SF 2), Back roll speed 18rpm/front roll 16.6rpm. All mounted on a compact design fabricated steel bedplate. Stainless steel tray underneath. Including electrical controls comprising Siemens G130 VFD drive and S7-1200 plc with HMI. CE marked, with full Technical file, Documentation and S ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The demonstration unit has so far only been used at trade fairs and for demonstrations. The machine is therefore as good as new. TECHNICAL DATA Chamber diameter 200 mm Gas pressure range 2 – 8 bar (g) Fineness range d50 1 – 40 μm Bn83a7ch Nominal gas flow 150 – 200 Nm³/h Dimensions (l/w/h) (without vacuum cleaner) 1.2 x 0.8 x 1.3 m Power supply 230 V; 2.2 kW REFERENCE PRODUCTS Product / End fineness / Throughput Celecoxib 90% ᐸ 2 ...