4 PLAMA granulating plants used machines

Compounding system with underwater granulation. Material: PE, PP, PS, ABS (+ fillers) // Details: DC motor, DC rotor, segmented screws (2x x 70 mm / 40D) and cylinders, degassing, vacuum pump, stuffing unit, backwash screen changer GNEUSS RSF 150, underwater granulation GALA with cutting rotor, water circulation system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization. Available at an additional cost: Sidefeeder, 4-fold gravimetric dosing system. (Ref. No. G27615.2)

Compounding plant for fiberglass contaminant PE/PP Snail/LD 70/38 Material: PE, PP // Extruder with high-wear process unit (HIP), segmented screws and cylinders of 70 mm / 40D, AC-motor 260 kW,, degassing, continuous rotor, vacuum pump, pressure transducer, 4-fold dosing, 3+1-fold gravimetric dosing, side-dose PSF 46, strand head, water bath, strand granulator, temperature control unit, water cooler, material conveyer, Siemens S7 central control with visualization

Material: PE, PP, PS, ABS + talc, fibers / Details: twin-screw extruder PLAMA ZSP 70, segmented screws and cylinders, DC motor 260 kW, degassing, vacuum pump, side feed, low temperature control unit SINGLE, 4+1 gravimetric dosing BRABENDER incl. working platform, screen changer GNEUSS RSF 150, start-up crossover, underwater granulation GALA MAP6 with cutting rotor, water system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization SIEMENS Multi Panel 270B Touch. Power: approx. 600 - 800 KG/hr

Material: PS, PE, PP, PA, // Details: DC motor 145 kW, screw revolutions: up to 600rpm, screw diameter 70 mm, L/D 32, segmented screws and cylinders, degassing (optional vacuum pump), control: Siemens S7 with visualization. incl. strand nozzle with water bath and strand granulator, motor up to 265kW possible. For extra charge: underwater granulation, or water ring granulation

Material: PE, PP, PS, ABS / Details: DC motor 220 kW, degassing, dcrunner, screw diameter 70 mm, LD: 32, Throughput: approx. 400 - 600 KG/hr.

Sell granulator for plastic strands of extrusion. 7,5 kW power. Sale, clearance there. If it works, I don't know, therefore the reasonable sale price.

Compounding plant Material: PE, PP, PS, WPC + fillers / Details: segmented screws and cylinders, three-phase motor 250 kW, dcrunner, screw speed: 300 rpm, degassing, 2x busch vacuum pump, side feeding Berstorff ZSFE 120 SO, metal separator, noise protection hood, ECON air granulating system ELG 3000, control: SIEMENS S7 with visualization. Up for a surcharge: extension to 40D possible

Material: PE, PP, PS // DC motor: 132 kW, power: approx. 300 - 500 KG/hr, screw 90mm, L/D30, strand nozzle, water bath, strand granulator.

Material: PE, PP, PS, ABS, / Details: double screw, runner, segmented screws + cylinder, hydraulic. Cassette sieve changer, strand nozzle, 6m water bath, strand granulator, additive dosing. 3-fold degassing (vacuum pump vs. extra charge), For an additional price: dosing system, water ring or underwater granulation.

Material: PE, PP, PS, ABS // Details: Screw diameter 2x 50 mm, L/D 32, DC motor 52 kW, Runner, segmented screws and cylinders, degassing, vacuum pump, screw speed: 400 rpm, strand nozzle, water bath, strand granulator. Power: approx. 150 - 250 KG/hr.

Compounding system with GALA underwater granulation Material: PE, PP, PS, ABS // Details: segmented screws and cylinders, screw diameter 2x 40 mm, L/D 44, DC rotor, DC motor 104 kW with gearbox, worm speed: max. 1,200 rpm, 2-fold degassing, ground pressure transducer, start-up valve, water box, Gala A1PAC6 underwater granulation with water circulation system and centrifugal dryer, temperature control unit SINGLE STW 150/1-6-100-NS/E, 6-fachimetric dosing incl. control. Control: Macromatex. Power: approx. 200 - 400 KG/hr

Material: PE, PP, PS, ABS / Details: three-phase motor 215 kW, segmented screws and cylinders, continuous rotors, screw diameter 50 mm, L/D 40, power: approx. 400 - 800 KG/hr, degassing, SIHI vacuum pump, gravimetric belt scale K-Tron WF 300 with stubble, strand nozzle, continuous cooling belt, cooling tank, squid granulator Scheer SGS 100, moisture measuring unit, control unit Siemens S7 with visualization.

1. Screen changer "Kreyenborg" K-SWE 180 2. Water ring granulation "AGRIFON" 3. Classification sieve for the separation of Granules over-good and lower grain sizes Throughput: Depending on material mix , 500 kg/h

Compounder with segmented screw elements, cylinder with a degassing opening with hot tee, stainless steel housing, swivel

Screws: 2x x 58 mm / 26D Engine: 250 kW DC Capacity: approx. 800 - 1000 KG Material: PE, PP, PS, ABS // Details: DC motor, concurrent, segmented screws and cylinders (2x x 58 mm / 26D), screw speed: max. 900 rpm, degassing, vacuum pump, BKG underwater pelletizing system OPTI-LINE 1 consisting of: Kreyenborg start-up, water box, cutting head, water circulation system, heat exchanger, process water tank, centrifugal Control: Siemens S7 with visualization

Stock No. 2587 1 used pelletizing plant, functionally tested, Throughput up to approx. 600 kg/h depending on the material, consisting of: 1 volumetric dosage Extruder Plastmachines Type PME 100 Single screw Ø 100 mm – 35 L/D Drive 134 kW – DC 1x degassing zone Melt filter BKG type K-SWE 121 RS – backwasher incl. Hydraulics 3 kW Strand head with holes 20 x Ø 3.5 mm Continuous cooling pool 400 x 4000 mm with strand guide rollers Strand extraction Strand pelletizer SG 300 ResoTec control / control cabinet Viewing by arrangement - at short notice More pelletizing lines / extruders available from our Wuppertal plant & ready for demonstration

Stock No.: 2107 1 used, partially overhauled and function-tested strand granulator with >> Granules Cutting Lengths Adjustment ( SV ) Manufacturer COMAC - Italy Type SG-100 SV Strand inlet width 100 mm cutting rotor width 110 mm, Parallel section rotor with 32 teeth Rotor Ø 200 mm >> strand pellet cutting length adjustment 2 drives: 1x for cutting rotor - 4 kW 1x for feed roller 1.5 kW with STOBER reduction gear Soundproof housing of the pelletizing chamber Visit / test run possible shortly by appointment. We also have matching strand cooling basins, strand blowers and classifying screens available from stock. Further strand granulators and other pelletizing systems/plants available from stock ( water ring - , hot impact and underwater pelletizing )

Cable shredder Manufacturer GEM Type TS 1000 Year of construction 05/2016 • CE certificate: TS 1000 • Slip No: PCCE 1036 • Pressure: 100 bar • 75 kW motor power • Weight: 10,200 KG • Rotation Number: 88/min • Rotor length: 1,000 mm • Rotor width: 450 mm • Hydraulic slider 1,400 mm • Rotor knife 50x50x30mm hardened DIN 2379 • Engine manufacturer Gama • Radiator manufacturer Yilmaz 87 revolutions / minutes • Electronics manufacturer Siemens and ABB PLC control panel • Hydraulic pneumatic sieve changing mechanics

A renovated extrusion recycling brand EREMA INTAREMA 1310 TVEplus for processing polyethylene (PE) and polypropylene (PP), polystyrene (PS), with laser filter and screen changer, degassing for processing printed films. Output up to 850 kg/h, electrics 240/400 volts, 50 hertz, immediately available. Financing possible without personal liability. Auch + Technik e. Kfm. D-73728 Esslingen Official agent for EREMA GmbH A-Ansfelden Phone +0049 1577 5329827

Cincinnati Titan92-APC Tapered Twin Screw Extruder Year of Make: 1996 incl. volumetric dosing unit for masterbatch Wittmann Dosimax Manual screen changer BD Plast Installed between extruder adapter and pelletizing head Alternatively available: Gneuss Screen Changer Granulating head Cincinnati GK120 works in the hot knock-off method including adapter and funnel Circular vibrating screen IFE US 400 x 1000 FV – LM445T Year of manufacture: 2018 for the separation of particles that are not bound in the granules with particle size < 1.8 mm Vertical granule cooler Knorr GK-600-PVC Year of manufacture: 2018 Cooling volume: approx. 190 litres Mounted on a walk-on steel platform incl. cyclone separator, complete supply and outlet pipes and blower Big-Bag Filling Station incl. material transport and material weighing SBB weighing technology Condition: fully functio ...

BRIKOL BT 1000 granulation line was built in 2019 in Poland by BRIKOL Sp. z o.o. (first launch in 2020). This extremely efficient and energy-saving system is designed for the production of pellets from various types of raw materials, i.e. wood waste, sawdust and bran. It features a number of components with the best technical parameters, which enable the entire production process to be performed fully automatically. In this way, the problem of waste disposal in the carpentry and sawmill industry can be solved while at the same time making a profit. The BRIKOL pellet production line is fully complete and has the following components: – MB37 hammer mill – drum dryer – kiln – pellet mill – pellet sifter – sawdust conditioner – tank – flight conveyor (2 pcs) – screw conveyor – binder hopper – cooling device – control cabinet with display and computer  ...

Key data: 90 mm, 30 , 110 U/min

used 90 mm extruder with strand nozzle, water bath and strand granulator

Key data: 60 mm, 30 , 150 U/min

used Bellaform extruder with 60 mm screw diameter, strand nozzle, water bath and strand granulator

Cable granulation system RMH 2 D Granulator: 11 KW Connection value: 19.6 KW Weight: 2.450 kg Capacity: 100-250 kg/with shredder up to approx. 300 kg/H Optionally available with shredder/belt system with permanent magnet

The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating.   When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...