PRESONA lp used machines

CARDBOARD PRESS SPECIFICATIONS Manufacturer: Presona Model: LP50VH2 Year of Manufacture: 2014 Maximum Pressing Force: 500 kN Maximum Oil Pressure: 25 MPa Type: Cardboard Press Condition: Used CONVEYOR BELT SPECIFICATIONS Manufacturer: Topeko Year of Manufacture: 2008 Length: 18 metres Width: 1.25 metres Motor: 40 kW Voltage: 400V / 50Hz Refurbishment: Completely rebuilt September 2024(chains, belts, all components replaced, outer frame only retained) Find more here - / Contact us at -

Specifications Maximum pressure: 100 tons Year of Make: 1995 Pressing force: 82 tons/m² Number of ties: 5 in vertical Channel cross-section: 1100 x 1100 mm Dimensions of the tailgate: 2050 x 1100 mm Power connection: 400 V/ 2 x 55 kW Weight: approx. 36 tons Bale tying: automatic Press capacity under operating conditions: max 1170 m³ / hour Press capacity at idle: max 720 m³ / hour Theoretical throughput: to density 30kg/m³) 22 tons/hour Theoretical throughput: to density 50kg/m³) 28 tons/hour Theoretical throughput: to density 100kg/m³) 42 tons/hour Open hopper allows filling with the conveyor belt Pre-pressing flap Automatic regulation of the channel Automatic binding with wire Choice of the length of the finished bale thanks to the bale counter Compact hydraulic power unit with low noise emissions Press plate stably guided on large rollers ...

TECHNICAL DATA Press pressure 100 tons Specific pressing force 81 N/cm2 Filling opening W 1650 x L 1100 mm Bale cross-section W 1100 x H 1100 mm Practical throughput 660m3/h Capacity at 30kg/m3 bulk density approx. 17-20 to/h Output at 50kg/m3 bulk density approx. 20-24 to/h Output at 100kg/m3 bulk density approx. 22-33 to/h Tank 2000 l Vertical bonding 5-fold Bale weight 500-900kg depending on the material Drive power 2x45 kW Weight approx. 32to Year 2008 Masch.- Nr. 21993 / 5386 Colour in RAL RAL5015 / RAL1023 Pricing ex works Wikon, subject to prior sale. WITHOUT conveyor belt Available from approx. CW31/32 2026, from place as seen

Presona LP 85 VH2 cross-tying baler, built in 2018 Specifications: Manufacturer: Presona Sweden Type LP 85 VH2 Year of manufacture 2018 Drive power 2 x 45 kW Operating hours 40,350 Effective operating hours approx. 22,000 Press force pre-press 28 t Press force main press 85 t Insertion shaft 1500 x 1100 mm Bale dimensions 750 x 1100 mm Bale weight 450 - 650 kg Theoretical volume: 1200 cbm/h Throughput at 30-100 kg/cbm: 13-30 t/h Tying 5-fold vertical, 3-fold horizontal Oil tank capacity 2000 L Transport dimensions press 10400 x 2400 x 2800 mm (LxWxH) Weight approx. 27000 kg The press was dismantled from ongoing operations. A spare parts package is included. The technical documentation is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subje ...

Good day We hereby offer you a used baler from the manufacturer Presona AB, type LP 85 VH1. The following technical data have been taken from the manufacturer's operating instructions and brochures, for which we cannot assume any liability for accuracy and completeness. Manufacturer Presona AB, Sweden Type LP 85 VH1 Year of construction 2014 Total operating hours, 37,565 hours, as of March 2025 Press force main press 85 t Specific pressing force 100 N/cm² Press force pre-press flap 28 t Dimensions of the insertion tray 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Throughput under operating conditions 410 m³/hour Bale dimensions 1,100 x 750 mm Drive power 55 kW 5-fold vertical bonding Hydraulic oil tank volume 1,000 L Press dimensions built up with hopper 10,350 x 2400 x 3,150 mm (L x W x H) Machine weight press approx. 25 t Hint: The machine was  ...

automatic baler Manufacturer: PRESONA Type: LP 65 VH 2 Year of construction: 2012 specifications: Press force: 65 t Specific pressing force: 7.87 kg/cm² Drive power: 45 kW Throughput: 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 425-575 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 26 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2012 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 5,000 mm Climbing length: approx. 10,500 mm according to attached pictures

1 Piece Used Automatic Baler Manufacturer: PRESONA Type: LP 80 VH1 Year of Make: 1993 Technical data: Press force: 78 t Specific pressing force: 9.5 kg/cm² Drive power: 1 x 55 kW Throughput capacity: approx. 400 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 450-600 kg Binding: 5-fold vertical Oil tank: approx. 1,000 litres capacity, standing separately next to the machine Machine weight: approx. 22 t

1 Piece Used Automatic Baler Manufacturer: PRESONA Type: LP 80 CH2 Year of Make: 1993 Technical data: Press force: 78 t Specific pressing force: 9.5 kg/cm² Drive power: 2 x 45 kW Throughput capacity: approx. 560 m³/h Filling opening: 1,650 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 450-600 kg Binding: 5-fold vertical Oil tank: approx. 2,000 litres capacity, standing separately next to the machine Machine weight: approx. 30 t

Technical specification Conveyor belt width: 1.87 m Length of the vertical part 8.6 m Lifting height: 5.2 m Total length in horizontal view: 26 m Belt depth in the horizontal loading area: 0.55 m Motor power: 7.5 kW + 5.5 kW If you have any questions, please call us: +48 696 072 985

Technical specification Conveyor belt width: 1.87 m Length of the vertical part 8.6 m Lifting height: 5.2 m Total length in horizontal view: 26 m Belt depth in the horizontal loading area: 0.55 m Motor power: 7.5 kW + 5.5 kW

Used thermoforming roll line by Tepro, model LPP 420-30/3618. New: 2014. Machine serviced, very good condition. Technical data: Machine stroke mm 300 Forming chamber mm 282x356 Pressing depth mm max. 130 Filling field length mm 900 Distance between tools mm 1800 Efficiency cycle/min 4-12 Vacuum pump m3/h 100 Power supply V/Hz 3x230/50 Power kW ~ 13.5 Compressed air pressure bar min. 6 Cooling water consumption l/min 8-15 Compressed air consumption Nl/cycle 100-150 Width of the upper foil mm 420±1 Bottom foil width mm 420+2 Max. bottom foil thickness (soft / hard) mm 0.3 / 0.6 Max. bottom foil diameter mm 400, sleeve 76 Max. top foil diameter mm 400, sleeve 76 Weight kg ~1300

• 3000w IPG with Picking • Sorting Unit LSR & Combo Storage H38 • Large Format 3000 x 1500mm • Year 2014 • Servo Electric - High Speed 30 Ton Punching Head • ONLY 535 HOURS!!!

Type: Vemag LPG 202 The LPG 202 length portioning machine links sausages with identical lengths and weights It can process cooked and raw sausage in natural, collagen and cellulose casings The LPG 202 length portioning machine is compatible with the following filling machines: AVG 201 ROBBY / ROBBY 2 ROBOT HP-series ROBOT DP-series Sausages are produced in the calibration range from 14 to 40+ mm Link all types of casing Extremely accurate lengths and weights Gentle treatment of casings Linking speed can be adapted to the type of casing Hygienic operation Casing magazine for artificial casings (optional) Device to detect ends of natural casings (optional) Delivery time: Machine is ready for delivery

Specifications Model: 25 lpv Tool holder: MK3 Pinole stroke: 110mm Projection: 400mm Drive: 3 phase motor with 2 motor stages and V-belt drive Speeds 14 / 35 – 65 – 70 – 125 – 130 – 200 – 250 – 335 – 400 – 570 - 670 – 1140 – 990 – 1980 rpm Table dimensions: LxW 330x330mm Machine dimensions: LxWxH 410x700x1830mm On the machine, we installed a new motor and renewed the entire electrical system with the step and motor circuit breaker as well as the cables.

Profile grinding machine / strip grinding machine Manufacturer: DIMA Model: LPS /9 Year of construction: 1994 9 grinding units / disc grinding units

Optoelectr. distance sensor BOD002N, BOD 24K-LPI08-S4, Balluff, mint condition -50% Special price !! The current new price of a similar product is approximately € 900. We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 250 hours. Incl. sensor cable with approx. 7m + 5-pin plug M12 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liabi ...

FINN POWER combined laser Mod. LPE5 CO2 laser power 2500 W Turret 20 stations including 1D index-1D index/forming. 2B index-1B index/forming. 8B normal. 1C index-1C index/forming-2C normal.1MT6-A. 1MT24-8 Working field 3000x1500 Year 2004 Rofin DC025

- Turret with 20 station (two Multi-Tool stations) - UP Forming option. - Operating hours: 21.500 - Number of turret stations (pcs): 20 (2x Index) - Number of turret stations (pcs): 20 - Working area max: 3.000 x 1.500 mm - Punching force: 300 kN

Used machine in good condition. Available for immediate delivery. - Working area punching / laser (X x Y): 2.530 x 1.270 mm - Max. workpiece weight: 200 kg - Punching force: 200 kN - Maximum material thickness mild steel laser: 8 mm - Control: Siemens 840 D - Material thickness aluminium max: 8 mm - Material thickness stainless steel max: 8 mm - Laser Type: CO2 - Number of turret stations (pcs): 20 - Dimensions (long x wide x high): 6.700 x 8.000 x 2.600 mm - Weight: 17.000 kg

Danfoss Optyma™ PLUS condensing unit Type: OP-LPHC271NTP00E 114x3480 Compressor type: NTZ271A4LR1B Cooling capacity for R404A: 14.24 kW at -10°C/40°C, 10.97 kW at -25°C/40°C, 8.24 kW at -30°C/40°C Dimensions: 1600 x 540 x 1800 mm Weight: 325 kg Number of fans: 2 x 600 mm Stock: 1 piece Stock number: AG 178 Condition: used Price on request. We have many others machines for meat industry and cooling - handtmann, seydelmann, viessmann, bitzer, copeland, . Check our offers.

Saw blade Ø: 360 mm Cutting range at 90° round: 110 mm Cutting area at 90° rectangle: 110 x 400 mm Cutting range mitred at 45° round: 110 mm Cutting area mitred at 45° rectangle: 110 x 280 mm Cutting speed: 16 - 50 m/min Drive motor: 380 V, approx. 1.5/2 kW Space requirement: 2600 x 1150 x 1600 mm Weight: approx. 1000 kg

x-travel: 4.000 mm y-travel: 2.100 mm z-travel: 1.000 mm taper ISO: ISO 50 Number of revolutions: 5.000 rpm table-size: 4.020x2.010 mm table weight: 12.000 Kg Control: Heidenhein iTNC530 Tools place: 32 fach rapid taverse: 15.000 mm/min total power requirement: kW weight of the machine ca.: 39 t dimensions of the machine ca.: 10680x5600x5100 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- **Printing method:** 6-color UV letterpress printing - **Maximum material width:** 300 mm - **Maximum print width:** 280 mm - **Maximum print length (repeat length):** 280 x 240 mm - **Maximum speed:** 7,200 prints per hour - **UV Drying:** 6 GEW UV Dryers - **Punching:** 1 rotary punching station - **Rewinder:** Integrated with slotting function (5 blades) - **Uncoiler:** With end position sensor - **Additional equipment:** - Rotometrics pressure control at the punching station - Metal-based polymer clichés - 11 magnetic printing cylinders

- **Printing method:** 6-color UV letterpress printing - **Maximum material width:** 300 mm - **Maximum print width:** 280 mm - **Maximum print length (repeat length):** 280 x 240 mm - **Maximum speed:** 7,200 prints per hour - **UV Drying:** 6 GEW UV Dryers - **Punching:** 1 rotary punching station - **Rewinder:** Integrated with slotting function (5 blades) - **Uncoiler:** With end position sensor - **Additional equipment:** - Rotometrics pressure control at the punching station - Metal-based polymer clichés - 11 magnetic printing cylinders

Manufacturer: Maskiner, Type: LPFK 2P 400 HKM, Year: 1997, Steuerung : Programm, Foil wrapping machine mm: yes, Foil stations: 2, Intermediate conveyor mm: yes, Shrinking tunnel mm: 300, Auslaufband mm: no, Electrical power shrinking tunnel kW: ca 30, Gesamtanschlusswert kW: 30, Foil 1 width mm: variable, Foil 2 width mm: variable, Through running hight mm: 150, Working width mm: 220, Year :1997