REHNEN rs used machines

technical details: - motor band oscillation - pneumatic belt tension - small support table on the pulley - Swivel range grinding track rear wall: 90° - 180° - Dimensions grinding track back wall:850 x 150 mm - Grinding track back wall glued with a graphite sliding lining - Band size: 150 x 2,280 mm - Steel table adjustable in height by spring pressure - Table size: 750 x 350 mm - Belt speed: 22 m/sec - Roll diameter: 140 /80 mm - Diameter suction nozzle: 100 mm - Bracket (included) - Miter stop (included) - Switch-plug combination - Motor protection and main switch according to VDE - Dust tested (GS) Holz-BG-Stuttgart (when connected to an extraction system with an air velocity of at least 20 m/sec) - Weight: 200 kg Sound power level (DIN EN ISO 7346) - No-load: 91 dB(A) - Processing: 91 dB(A) Workplace-related emission value (DIN EN ISO 11202) - No-load: 83 ...

Oscillation: ja ja / nein : ja ja/nein : ja ja/nein tiltable up to: 45/90 Grad Motor output: 3 kW Table dimensions: 750x350 mm sanding width: 150 mm Weight: 200 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

mobile, with lockable castors Table size 2000 x 1550 mm swivel horizontal-vertical Extension to height-adjustable possible on request

table length: 2000 mm table width: 1000 mm stroke height: 400 - 1010 mm weight max. in kg: 300 kg weight of the machine ca.: 220 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 100 mm material thickness: 15 mm no. of straightening rolls: 9 straightening feed: 7 m/min total power requirement: 0,75 kW weight of the machine ca.: 380 kg dimensions of the machine ca.: 710 x 920 x 1360 mm Features: - 5x driven lower rollers - 4x adjustable upper rollers - Max. cross-section approx. 800 mm² - Mobile use on casters - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

racks: 17; support tube spacing: 60mm; rack length: 650mm; langth: 200 - 2000mm; rolls: Polyamid 4 Stück; depth: 870 - 1180mm; height: 198mm; safe load: 400kg; The user-friendly Varioflex drying rack is a space-saving and gentle solution for storing painted workpieces. The four swivel castors mean that it can also be used for transporting workpieces. Its solid tube frame design can be adjusted between 200 mm and 2,000 mm. With 17 inside and outside plastic-coated support tubes on each side, the rack can support up to 400 kg of evenly distributed weight. The plug-in inside and outside support tubes can be taken out and re-inserted as needed. When not in use, the drying rack can be collapsed and takes up minimal space.

was in operation for conveying cereals and salt (silo filling),, Screw diameter: 150 mm,, Emission height: approx. 3,000 mm., Dimensions / weight: LxWxH: 4.500x1.085x2.970mm

max. tensile force: 20 to, max. stroke 1250 mm, max. cutting speed: 7m/min, maximum return speed: 25 m/min. max. workpiece 580 mm, max. tool 90 mm, clearing: 2 pieces, round-clock table, automatic workpiece feeder device, year 1960

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

General information / technical data: mechanical vertical Interior Maschinein used excellent condition Tractive effort at 3 m / min: 4000 KG Space speed: 3 m / min Return speed: 6 m / min maximum stroke: 1000mm maximum tool length: 1200 mm Table area: 450 mm x 250 mm Table breakthrough: 90 mm Workpiece diameter: any Dimensions: h x w x d 1610 x 630 x 855 mm Power supply & power: 380 Volt 50 HZ / 2.2 / 4,5KW Optional accessories: • Thread cutting coolant/fluid pump • electrical scanning of the clamping JAWS (tool collection control to prevent against accidentally driving back the drawbridge) • manual central lubrication • manual table 7 piece thorns Ã?20-(6), 25-(8), 30-(10), 40-(12), 48-(14), 50-(14), 60-(18)mmzur manufacturing of grooves in different angles (= Groove width of a thorn) Comment: The double spindle dr ...

Surface grinding machine. Magnetic chuck of 550x250mm. Table travel: 700mm. Grind surface area: 600x350mm. Max. height: 375mm. Cross travel: 300mm. Wheel: 350x127x50 / 300x127x100 Weight: 2900Kg.

Cutter 65 ltr. CPL. Stainless steel mixing speed

Crack Control Panel type EOK Through light control for detection of hairline cracks in the foil before filling

Granulator Load area: 140x140 mm Overall size: 950x500x1300 mm Power: 2,5 kW Weight: 200 kg Technical data: • Designed for beside the press operation (injection and blow moulding) • 3 knives open rotor • Reversible hopper • Slow rotor speed (250 RPM) • Lateral end discs which turn with the rotor • Standard screen in stainless steel • Quick opening and easy cleaning Processes: • Injection • Blow moulding • Extrusion Designed for: • Small wastes from purgings and castings • Tubes and profiles with small diameter • Trimmings

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

N:18559 Date:27 12 85 Type:RSD 281 ratio: 4.704:1

MASSON MARINE GEARBOX RSD 201 / 3.978:1

BETEX 24 RSD - heated up to 150 kg Workbench model with swivel arm Applications: Chemical industry, steel industry, paper industry, transmission manufacturers, mechanical engineering, transport sector Voltage / Frequency / Power: 230 V / 50-60 Hz / 3.6 kVA Properties: When warming in a horizontal position, the maximum effect is achieved. Workpiece: Weight bearings max. 150 kg (other workpieces 80 kg) Inner diameter 15/120 mm Outer diametermax. 520 mm Width max. 200 mm Automatic temperature: Magnetic probe, control range up to max. 240 °C Aperture priority: Time range 0 to 45 minutes Bays: Edge length 14, 30, 60 mm

MASSON MARINE GRAR BOX RSD 401 REDUCTION 4,625:1

MASSON RSD 401 RATIO 4,625:1

Rind mill

Gearbox due to re-motorization PTO drive shaft is inclusive Reduction 4,987:1

Bidder information: The following items have already been removed from the machine: Z-axis motor, scale with cable, lubrication distributor, axle controller Z-axis. Manufacturer Kellenberger Type designation KELCO 90 RS175/1000 Built April 9, 1998 Weight approx. 5000 kg Condition: used, defective Item number: 000018650

Repair service Reparatur Service POWER SUPPLY RS10-24 A for Mazak – Repair price 100 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. Repair of other power supplies on request. If you are interested in our articles or have any questions, please contact us beforehand by phone or email.